Re: [fixed] I have a Blue Screen of Death by this 801 pack
I'm having a similar problem, however my SATA controller is an NVIDIA nForce 630a (MCP67/68), which according to the stable release notes is supported. I'm using DP MassStorage in a BartPE environment, and the system will not boot from it, giving a STOP error 0x7b. According to MS knowledge base, this is due to a storage controller not being detected properly. I've tried the disc in an nForce 410-based system, and the disc will completely boot into a BartPE environment.
Below are excerpts from my HWID tables:
===========
PCI Devices
===========
PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&2411E6FE&0&C0: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&2411E6FE&0&C1: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&2411E6FE&0&C2: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&2411E6FE&0&C3: PCI standard host CPU bridge
PCI\VEN_104C&DEV_8024&SUBSYS_10001458&REV_00\4&37A8D8D1&0&7040: Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_105A&DEV_4D68&SUBSYS_4D68105A&REV_02\4&37A8D8D1&0&3840: Promise Technology Inc. Ultra IDE Controller
PCI\VEN_10DE&DEV_053E&SUBSYS_D0001458&REV_A2\3&2411E6FE&0&90: NVIDIA GeForce 7025 / NVIDIA nForce 630a
PCI\VEN_10DE&DEV_0541&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&0&0A: PCI standard RAM Controller
PCI\VEN_10DE&DEV_0542&SUBSYS_0C111458&REV_A2\3&2411E6FE&0&09: NVIDIA nForce PCI System Management
PCI\VEN_10DE&DEV_0547&SUBSYS_50011458&REV_A2\3&2411E6FE&0&00: PCI standard RAM Controller
PCI\VEN_10DE&DEV_0548&SUBSYS_00000000&REV_A2\3&2411E6FE&0&08: PCI standard ISA bridge
PCI\VEN_10DE&DEV_054C&SUBSYS_E0001458&REV_A2\3&2411E6FE&0&50: NVIDIA Network Bus Enumerator
PCI\VEN_10DE&DEV_0554&SUBSYS_B0021458&REV_A2\3&2411E6FE&0&48: NVIDIA nForce Serial ATA Controller
PCI\VEN_10DE&DEV_055C&SUBSYS_A0021458&REV_A1\3&2411E6FE&0&38: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_10DE&DEV_055E&SUBSYS_50041458&REV_A2\3&2411E6FE&0&10: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_055E&SUBSYS_50041458&REV_A2\3&2411E6FE&0&20: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_055F&SUBSYS_50041458&REV_A2\3&2411E6FE&0&11: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_055F&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&0&21: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_0560&SUBSYS_50021458&REV_A1\3&2411E6FE&0&30: Standard Dual Channel PCI IDE Controller
PCI\VEN_10DE&DEV_0561&SUBSYS_00000000&REV_A2\3&2411E6FE&0&40: PCI standard PCI-to-PCI bridge
20 matching device(s) found.
============
ACPI Devices
============
ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_67\_0 : Dual-Core AMD Opteron(tm) Processor 1210
ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_67\_1 : Dual-Core AMD Opteron(tm) Processor 1210
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI Fixed Feature Button
ACPI\PNP0000\4&2FD10A02&0 : Programmable interrupt controller
ACPI\PNP0100\4&2FD10A02&0 : System timer
ACPI\PNP0103\4&2FD10A02&0 : High precision event timer
ACPI\PNP0200\4&2FD10A02&0 : Direct memory access controller
ACPI\PNP0401\4&2FD10A02&0 : ECP Printer Port (LPT1)
ACPI\PNP0800\4&2FD10A02&0 : System speaker
ACPI\PNP0A06\3&473F1A46&0 : Extended IO Bus
ACPI\PNP0A08\1 : PCI bus
ACPI\PNP0B00\4&2FD10A02&0 : System CMOS/real time clock
ACPI\PNP0C01\2&DABA3FF&0 : System board
ACPI\PNP0C02\1 : Motherboard resources
ACPI\PNP0C02\4 : Motherboard resources
ACPI\PNP0C02\5 : Motherboard resources
ACPI\PNP0C04\4&2FD10A02&0 : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0 : ACPI Power Button
ACPI\PNP0C14\NVIF : Microsoft Windows Management Interface for ACPI
ACPI\PNPA000\4&5D18F2DF&0 : SCSI/RAID Host Controller
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000 : ACPI Multiprocessor PC
22 matching device(s) found.
Any help would be *much* appreciated. Please let me know if there's any other information you need from me. BTW, I've tried using yesterday's nightly release to the same error message.
Thanks in advance.