• L38Crow
  • DriverPacks newbie
  • Offline
  • Registered: 2007-01-18
  • Posts: 7

Topic: [BSOD] 0x0000007B Error with Nvidia 500 SATA RAID MassStorage 7.12

I got BSD on my system during initial DVD-boot process at the point of "Starting windows" after loading of all drivers.

I found out that it only happends when my Nvidia SATA Stripe set is enabled (NVidia SATA Raid controller is enabled in BIOS).
MB ASUS P2N-E SLI (nVIDIA nForce 500 SLI, AMD Hammer), 4096 Mb (DDR2-800 DDR2 SDRAM), Dual Core AMD Athlon 6000+,

If SATA Raid controller is enabled in BIOS - setup falls to BSD with error code 0x0000007B.

This is only happened with a latest MassStorage Driverpack 7.12. Reverting to 7.09.01 helps solving problem.

I tried integrating updated since 7.09.1 drivers directly (one by one) into clean installation. I found out that BSOD appears after integrating this one:
\N\5 NVIDIA nForce 520 RAID/AHCI Controller 07/02/2007,5.10.2600.0995 (Nvidia 12.15)

Are there any possible solutions?

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: [BSOD] 0x0000007B Error with Nvidia 500 SATA RAID MassStorage 7.12

Hello L38Crow,

Thank you for reporting in - you have helped us to help you - it is always nice to get feedback on the packs!
i belive we may already be working on your issue.

Please see this other thread
http://forum.driverpacks.net/viewtopic.php?id=2277

please read the "read before you post" in my sig
you didn't include your relevant hwid which is neccessary to properly help you in this case
Your log and ini are probably not needed at this point but are always a good idea to include
your DPs_BASE.log would have told us what OS and SP you are installing  - you omitted that info in your post
the search function would have yeilded that this issue has (i belive) been reported already and you could have chimed in there.


have a great day, we are glad you are here and contributing to the community!

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • L38Crow
  • DriverPacks newbie
  • Offline
  • Registered: 2007-01-18
  • Posts: 7

Re: [BSOD] 0x0000007B Error with Nvidia 500 SATA RAID MassStorage 7.12

Thank you for trying to help me out.

===== HWIDS =====

=========== 
PCI devices 
=========== 
 
 
PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&2411E6FE&0&C0: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&2411E6FE&0&C1: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&2411E6FE&0&C2: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&2411E6FE&0&C3: PCI standard host CPU bridge
PCI\VEN_10DE&DEV_0050&SUBSYS_00000000&REV_F3\3&2411E6FE&0&08: PCI standard ISA bridge
PCI\VEN_10DE&DEV_0052&SUBSYS_815A1043&REV_A2\3&2411E6FE&0&09: NVIDIA nForce PCI System Management
PCI\VEN_10DE&DEV_0053&SUBSYS_815A1043&REV_F2\3&2411E6FE&0&30: NVIDIA nForce4 Parallel ATA Controller
PCI\VEN_10DE&DEV_0054&SUBSYS_815A1043&REV_F3\3&2411E6FE&0&38: NVIDIA nForce4 Serial ATA RAID Controller
PCI\VEN_10DE&DEV_0055&SUBSYS_815A1043&REV_F3\3&2411E6FE&0&40: NVIDIA nForce4 Serial ATA RAID Controller
PCI\VEN_10DE&DEV_0057&SUBSYS_812A1043&REV_F3\3&2411E6FE&0&50: NVIDIA Network Bus Enumerator
PCI\VEN_10DE&DEV_005A&SUBSYS_815A1043&REV_A2\3&2411E6FE&0&10: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_005B&SUBSYS_815A1043&REV_A3\3&2411E6FE&0&11: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_005C&SUBSYS_00000000&REV_F2\3&2411E6FE&0&48: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_A3\3&2411E6FE&0&70: nForce4 PCI-Express Root Port
PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_F3\3&2411E6FE&0&58: nForce4 PCI-Express Root Port
PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_F3\3&2411E6FE&0&60: nForce4 PCI-Express Root Port
PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_F3\3&2411E6FE&0&68: nForce4 PCI-Express Root Port
PCI\VEN_10DE&DEV_005E&SUBSYS_815A1043&REV_A3\3&2411E6FE&0&00: nForce4 HyperTransport Bridge
PCI\VEN_10DE&DEV_0611&SUBSYS_34651458&REV_A2\4&243D7BD0&0&0070: NVIDIA GeForce 8800 GT
PCI\VEN_1106&DEV_3044&SUBSYS_81FE1043&REV_C0\4&15B9AB7D&0&0848: VIA OHCI Compliant IEEE 1394 Host Controller
20 matching device(s) found.

==== DPS_BASE.INI ==============================

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "D:\Install\WinXP.AllDrv"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID		= "default"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_Graphics_A	= "yes"
DP_Graphics_B	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_Sound_A	= "yes"
DP_Sound_B	= "yes"
DP_MassStorage_textmode = "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCC"

=========== DPs_BASE.log ======================================================

2008-01-02 20:20:44 : <INIT> DriverPacks BASE 7.05.2 initialized.
2008-01-02 20:20:44 : <INIT> Host environment: WIN_2003 Service Pack 2 on X64 CPU.
2008-01-02 20:20:44 : <INIT> Created temporary working directory.
2008-01-02 20:20:44 : <INIT> Imported proxy settings from Internet Explorer.
2008-01-02 20:20:44 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2008-01-02 20:20:44 : <INIT> 	Detected DriverPack Chipset 7.10.1!
2008-01-02 20:20:44 : <INIT> 	Detected DriverPack CPU 7.04.1!
2008-01-02 20:20:44 : <INIT> 	Detected DriverPack Graphics A 7.10!
2008-01-02 20:20:44 : <INIT> 	Detected DriverPack Graphics B 7.12.1!
2008-01-02 20:20:44 : <INIT> 	Detected DriverPack LAN 7.12.1!
2008-01-02 20:20:44 : <INIT> 	Detected DriverPack MassStorage 7.09.1!
2008-01-02 20:20:44 : <INIT> 	Detected DriverPack Sound A 7.12!
2008-01-02 20:20:44 : <INIT> 	Detected DriverPack Sound B 7.12!
2008-01-02 20:20:44 : <INIT> 	Could not detect any 3rd party DriverPacks.
2008-01-02 20:20:44 : <INIT> 	Finished scanning.
2008-01-02 20:20:44 : <INIT> Detected settings file "D:\Install\WinXP.AllDrv\Source\Drivers\DPs_BASE.ini".
2008-01-02 20:20:44 : <INIT> Windows XP Professional -  Retail SP2 detected.
2008-01-02 20:20:44 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2008-01-02 20:20:44 : <INIT> Imported settings from settings file.
2008-01-02 20:20:44 : <GUI>  Initialized GUI.
2008-01-02 20:20:44 : <GUI>  Created a list of all available language files.
2008-01-02 20:20:45 : <GUI>  Set the last used language, English, as the GUI language.
2008-01-02 20:20:56 : <GUI>  Refreshed UpdateChecker with success.
2008-01-02 20:20:57 : <GUI>  Refreshed UpdateChecker with success.
2008-01-02 20:21:04 : <GUI>  Saved settings!
2008-01-02 20:21:04 : <GUI>  Closed GUI.
2008-01-02 20:21:04 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2008-01-02 20:21:14 : <PREP> Extracted DriverPack MassStorage to a temporary working directory.
2008-01-02 20:21:15 : <PREP> Removed all attributes from \I386.
2008-01-02 20:21:15 : <PREP> Created a backup of \I386\winnt.sif.
2008-01-02 20:21:15 : <PREP> Created a backup of \I386\txtsetup.sif.
2008-01-02 20:21:15 : <PREP> Created a backup of \I386\dosnet.inf.
2008-01-02 20:21:16 : <PREP> Deleted \$OEM$\cmdlines.txt (because only the entry for the DriverPacks existed).
2008-01-02 20:21:16 : <PREP> Deleted \$OEM$\ROE.exe.
2008-01-02 20:21:16 : <SLIP> Created necessary directory structure for method 2.
2008-01-02 20:21:16 : <SLIP> Copied files necessary for method 2.
2008-01-02 20:21:16 : <SLIP> Extracted files necessary for method 2.
2008-01-02 20:21:17 : <SLIP> Created \I386\presetup.cmd file.
2008-01-02 20:21:17 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2008-01-02 20:21:17 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2008-01-02 20:21:25 : <SLIP> Copied DriverPacks to \OEM.
2008-01-02 20:21:25 : <SLIP> English (RyanVM's) UpdatePack detected: no HDA hotfix will be slipstreamed.
2008-01-02 20:21:39 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2008-01-02 20:21:43 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2008-01-02 20:21:43 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2008-01-02 20:22:39 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2008-01-02 20:22:39 : <SLIP> Updated \I386\winnt.sif to support method 2.
2008-01-02 20:22:39 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2008-01-02 20:22:39 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2008-01-02 20:22:39 : <SLIP> Slipstream finished in 1 minutes and 35 seconds.
2008-01-02 20:22:44 : <CLNP> Temporary working directory successfully deleted.
2008-01-02 20:22:44 : Program terminated.

Last edited by L38Crow (2008-01-03 17:23:44)