Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

I NEED the rest of your LOGS!!!!  - ignored completely jeeezz... i can only ask nice so many times sorry...
and you just kept replying with a number of scripts we didnt write.
I had every reason to belive you never tried a clean install so where was i to start troubleshooting?
you gave me one log to go on... in your 15 posts about this.

Your Logs allow me to see why things happen, that is why we log...
the log would have told me what was different about your system - everyone else has no problem

your HWID's from the one log you provided put me there.

Had that been in your first post instead of two weeks later...   then you wouldnt feel like you do about me.

please check our "read before you post" in my sig below and see how many you can check off the list. ?

i know exactly what your problem is now...

i am assumeing you have DP_Sound_B_wnt5_x86-32_7102.7z even though your post indicates an older version

[T-5]
; REQUIRED
exc_count    = 1
; OPTIONAL
exc_1_tagFiles    = 1
exc_1_tagFile1    = "%SystemRoot%\system32\drivers\dmxsens.sys"
exc_1_+hwids    = 0
exc_1_-hwids    = 0
exc_1_+infFiles    = 1
exc_1_+infFile1    = "%DPSROOT%\D\S\T\5\*.inf"
exc_1_-infFiles    = 0
exc_1_commands    = 1
exc_1_command1    = "%DPSROOT%\D\S\T\5\T_DMX.exe"

refers to a removed exe in the pack

delete this section from the DriverPack_Sound_B_wnt5_x86-32.ini and repack

done

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

there weren't ever any hard feelings... please understand that... I realize I was late posting my logs... I apologize... and the night I tried posting them I got really frustrated because the board kept timing out and either it wouldn't post or for some reason it was causing me to double/triple post... so I gave up after posting the finisher log...

I really do appreciate EVERYONE's input as it has helped me understand some things better.

O.K. one last question... I actually have a DMX 6Fire soundcard, do I need to delete that entire section of the inf, or just the reference to the T_DMX.exe? Removing that section won't prevent it from installing the drivers I need, is all I'm asking I guess... sorry for the ignorance.

Thanks again in advance, you have been very helpful and I will certainly donate as soon as I can.

Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

the latest version on the site for sound b is 7.10.1 and that is what I have, which according to the changelog on the page says something about removing that exe you are talking about, but must have just forgotten to update the inf...

thanks again for everything... I truly do apologize for frustrating you...

Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

I have got the same problem here as above since updating the mass storage yesterday.
Another error i have is this:

http://i14.tinypic.com/86o5089.jpg

I get this at random times, while slipstreaming or even whenever i am not yet slipstreaming (i use Vista)

And when checking for "updates"

http://i1.tinypic.com/6ocay37.jpg

English version smile

http://i5.tinypic.com/8dzhd7m.jpg

Any ideas?

Last edited by Friends4U (2007-11-28 20:03:19)

Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

@freinds
Where did you get that means that the version is not verifyable to the server list
this may mean the server was unavailable when you requested. it may mean you have a bunch iof test packs too... ;-)
 
@ben
the rest of the section is just to make the finisher run the exe since the exe is not there no finishing required.
therefore section not required - you may also notice most of the driversw don't have any entries. if a driver has a section it is by my definition an "exception"

please remember that the finisher does not install drivers... (so yes it will still be installed) it adds things that are not installed by the drivers inf file (it adds control panels and start menu shortcuts that kind of stuff)

@All
for the 1000 th time the finisher DOES NOT INSTALL DRIVERS!

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

My problem is solved exept for the latter of the notifications.
I did a clean install but i think it's the server here i couldnt connect today because MySQL did not work on driverpacks.

Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

lots of things may cause "Where did you get that"
- not connected to internet
- firewall blocking access
- server not available

It usually means that you are trying out a test pack
Bâshrat the Sneaky has a few tounge in cheek error messages like this one. smile
come to think of it I added a few also...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

atm, the rss feed cannot update.

The answer was 42?
Kind regards, Jaak.

Re: [Solved] SB.ini - AutoIt Error - Line 0 (File "I:\DPsFnshr.exe");

Base update checker was fixed this morning.

Last edited by Jaak (2007-11-30 05:45:40)

The answer was 42?
Kind regards, Jaak.