• Mike32b
  • DriverPacks newbie
  • Offline
  • Registered: 2007-11-23
  • Posts: 2

Topic: Integrating Driverpacks on an XP 9 in 1 Install CD

I have a 9 in 1 XP install cd for home/pro/media center for OEM/retail/corporate. I am a technichian so this is a very valuable CD for reinstalling windows on all types of customers computers. Luckily this CD already has SP2 slipstreamed into it however I would also like to get the MASS Storage driver pack working in it so I can install on computers with SATA drives. After some messing with the DP Base program I haven't been able to get it to recomend the 9 in 1 directory as a suitable enviorment. I am attaching some screen captures of the folder of the 9 in 1.

Root of the 9 in 1: The folders labeled XPHO, XPHR, XPMI, XPPC, XPPO, XPPR all have a system32 folder inside them as well as lots of .SY_ files.
http://img210.imageshack.us/img210/1821/screenhunter01nov221552ne2.gif

The BSCRIPT folder within the 9 in 1:
http://img513.imageshack.us/img513/8788/screenhunter02nov221554bb1.gif

The folder labeled ROOT within the 9 in 1:
All the folders in here have an i386 folder and basically look like their own windows xp install.
http://img249.imageshack.us/img249/2219/screenhunter03nov221554ff2.gif


So is there anyway to get the mass storage pack integrated in this? That would be very helpful.
Thanks!

  • Mike32b
  • DriverPacks newbie
  • Offline
  • Registered: 2007-11-23
  • Posts: 2

Re: Integrating Driverpacks on an XP 9 in 1 Install CD

Well I found out I could integrate em by selecting the folders within the folder called ROOT. They all integrated fine, now to try and make it a bootable iso again. Im not really sure how yikes

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Integrating Driverpacks on an XP 9 in 1 Install CD

Welcome to driverpacks.net

Let us know how this works out for you... this is not a supported setup but im intrigued...

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: Integrating Driverpacks on an XP 9 in 1 Install CD

Hi,
when you integrate driverpacks, an OEM folder is created in the folder you have used as source.
Copy an OEM folder to root of the DVD.

Here's what I had to do to make this work on MSDN DVD
They too have several OSes on them, and each OS has a corresponding folder where the system32 folder and other systemfiles (for txtmode) are.

I copy/overwrite the newly created files (sorted by date) from the i386 folders to the corresponding folder for that OS.
(you do not need to copy driver.ca_)
Also copy the *.SY_ files from i386 to corresponding folder (you find them when sorted by type).

And for the bootfile, you can use isobusterto get it off the original DVD.
To make a bootable burn in nero (what you apparently use), set floppy option to NO emulation, sectors set to 4, and hex is 07C0

these images should be hosted on a better site.
I can hardly reply in here.. our forum is overloaded?

Last edited by Jaak (2007-11-24 09:22:07)

The answer was 42?
Kind regards, Jaak.
  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: Integrating Driverpacks on an XP 9 in 1 Install CD

oh,
you do need to slipstream each supported OS you want this done for, and copy the files for each OS.
You need only one OEM folder, though.
It must be in root of the DVD.
The other copies made when you slipstreamed can be deleted.
(when you do not change selection when you run DpsBase, they are all identical. Only the one you put in root is used.)

Last edited by Jaak (2007-11-24 09:34:57)

The answer was 42?
Kind regards, Jaak.
  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Integrating Driverpacks on an XP 9 in 1 Install CD

got rid of your dup posts for ya jaak

Did you get this to work Mike?

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: Integrating Driverpacks on an XP 9 in 1 Install CD

Hi, I wondered why I could not find back my txt on this, and above posts were written from memory.
Today I realised I had also put the info in a blog item.
Here is that blog
http://jtdoom.spaces.live.com/blog/cns! … !115.entry

The answer was 42?
Kind regards, Jaak.
  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Integrating Driverpacks on an XP 9 in 1 Install CD

Jaak why don't you use that as a rough draft for thread and well get it stickied for multi OS disks and Multi OS UnAttended Windows DVD
which i furthermore will refer to as      (are you ready)

MOSUWDVD 

- Pronounced    Moo-Sue-DVD

LOL

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website