Topic: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

I've just compiled a fresh XPCD with latest DriverPacks : base 7052, chipset 706, graphics 7061 + 705 + 704, lan 7062, mass 7072, sound 707 both, wlan 706.
I boot on CD, drivers are scanned, then startup takes a long time on "Examinating disk 0 of xxxx Mb Id 0 ... on nvatabus ...."

More or less one minute waiting, BSOD happens :
DRIVER_IRQL_NOT_LESS_OR_EQUAL
STOP: 0x000000D1
nvatabus.sys - Address .....

IWIDs :

=========== 
PCI devices 
=========== 

PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&2411E6FE&0&C0: Pont CPU hôte standard PCI
PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&2411E6FE&0&C1: Pont CPU hôte standard PCI
PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&2411E6FE&0&C2: Pont CPU hôte standard PCI
PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&2411E6FE&0&C3: Pont CPU hôte standard PCI
PCI\VEN_104C&DEV_8025&SUBSYS_10001458&REV_01\4&13699180&0&5048: Contrôleur hôte Texas Instruments IEEE 1394 compatible OHCI (Open Host Controller Interface)
PCI\VEN_10DE&DEV_0050&SUBSYS_00000000&REV_A3\3&2411E6FE&0&08: Pont ISA standard PCI
PCI\VEN_10DE&DEV_0052&SUBSYS_0C111458&REV_A2\3&2411E6FE&0&09: NVIDIA nForce PCI System Management
PCI\VEN_10DE&DEV_0053&SUBSYS_50021458&REV_A2\3&2411E6FE&0&30: NVIDIA nForce4 Parallel ATA Controller
PCI\VEN_10DE&DEV_0054&SUBSYS_B0031458&REV_A3\3&2411E6FE&0&38: NVIDIA nForce4 Serial ATA Controller
PCI\VEN_10DE&DEV_0055&SUBSYS_B0031458&REV_A3\3&2411E6FE&0&40: NVIDIA nForce4 Serial ATA Controller
PCI\VEN_10DE&DEV_0057&SUBSYS_E0001458&REV_A3\3&2411E6FE&0&50: NVIDIA Network Bus Enumerator
PCI\VEN_10DE&DEV_005A&SUBSYS_50041458&REV_A2\3&2411E6FE&0&10: Contrôleur hôte USB OpenHCD standard
PCI\VEN_10DE&DEV_005B&SUBSYS_50041458&REV_A3\3&2411E6FE&0&11: Contrôleur hôte PCI vers USB standard étendu
PCI\VEN_10DE&DEV_005C&SUBSYS_00000000&REV_A2\3&2411E6FE&0&48: Pont PCI vers PCI standard PCI
PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_A3\3&2411E6FE&0&60: nForce4 PCI-Express Root Port
PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_A3\3&2411E6FE&0&68: nForce4 PCI-Express Root Port
PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_A3\3&2411E6FE&0&70: nForce4 PCI-Express Root Port
PCI\VEN_10DE&DEV_005E&SUBSYS_50001458&REV_A3\3&2411E6FE&0&00: nForce4 HyperTransport Bridge
PCI\VEN_10DE&DEV_0291&SUBSYS_22111682&REV_A1\4&243D7BD0&0&0070: NVIDIA GeForce 7900 GT/GTO
PCI\VEN_1102&DEV_0004&SUBSYS_00531102&REV_03\4&13699180&0&4048: Creative SB Audigy
PCI\VEN_1102&DEV_4001&SUBSYS_00101102&REV_00\4&13699180&0&4248: Contrôleurs hôte IEEE 1394 compatible OHCI
PCI\VEN_1102&DEV_7003&SUBSYS_00401102&REV_03\4&13699180&0&4148: Creative Game Port
PCI\VEN_14F1&DEV_8800&SUBSYS_665F107D&REV_05\4&13699180&0&3848: WinFast DTV1000 T WDM Video Capture.
PCI\VEN_14F1&DEV_8802&SUBSYS_665F107D&REV_05\4&13699180&0&3A48: WinFast DTV1000 T BDA Transport Stream Capture
24 matching device(s) found.
 
 
=========== 
USB devices 
=========== 

USB\ROOT_HUB\4&DC3EC07&0                                    : Concentrateur USB racine
USB\ROOT_HUB20\4&329CEF23&0                                 : Concentrateur USB racine
USB\VID_04A9&PID_1093\A42DA0                                : Prise en charge d'impression USB
USB\VID_04CF&PID_8818\100                                   : Périphérique de stockage de masse USB
USB\VID_0DDA&PID_2001\00000000001                           : Périphérique de stockage de masse USB
5 matching device(s) found.

Last edited by maxximum (2007-07-19 18:35:10)

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

Hi maxximum

Graphics A is not bugfree.. Can you please retry with Graphics A, 7.04 (or 7.052, which is actually same as 7.04)?

The answer was 42?
Kind regards, Jaak.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

I can test removing all DriverPacks except MassStorage, & chipset.
However, "nvatabus.sys" error seems to be DP MassStorage related rather than Graphics ?

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

Hi
you could call it a hunch.. or a gutfeeling.
It would tell us something.
it did not give a 7B..
The Nvidia in Mass and Chips was not updated..
If mass storage is good, and chipset is right, we'll at least know if there is a problem with those, or with what happens later on.

The answer was 42?
Kind regards, Jaak.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

I've just tested again with a XPCD with only DP MassStorage 7.07.2 and still the same BSOD sad

I'll test tomorrow with older DP Mass 7.06.1.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

Hi maxximum,

Nvidia mass storage drivers have not been touched since 6.08...
But some Nvidia chipset drivers were updated in chipset version 7.05.
http://www.driverpacks.net/DriverPacks/ … .php?pag=c

sad

edit.. sad it looks like we can find some more recent at Nvidia.

Last edited by jtdoom (2007-07-21 11:01:53)

The answer was 42?
Kind regards, Jaak.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

if the drivers in chipset and mass dont agree it may land you here.

Try mass AND chipset only. maybe the last instead of the latest version of chipset if needed to get going.

Last edited by OverFlow (2007-07-21 13:54:38)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

I've tested with new XP integrated :
- base 7.05.2 + mass 7061 + chipset 706 ==> BSOD, though I'm sure 100% I've already tested it and it was working.
- base 7.05.2 + mass 705 + chipset 705 ==> BSOD, same ... I'me sure it was working.
- I've found an old CD made back nov 2006 with chipset 609, mass 608, and other DriverPacks. I wrote on the CD "works fine on nForce4 ultra".
I've even removed 3 of my 4 harddisks ... still the same BSOD, and removed some PCI cards (TV, sound). Still the same BSOD.
So, definitively I have an hardware problem on my nForce4 mobo .... but I can't find what it is ... sad sad
I'll reset config, and test this afternoon.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

I've tested Base 7.05.2, Chipset 706 and MassStorage 7071 (7072 doesn't work on my Gigabyte P965 DS4) on my second machine (Asus M2N4-SLI, nForce4, SATA drive) and it gives no BSOD.
Maxximum, maybe you should check the RAMs of your PC (memtest).

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

Tested RAM during 2 hours and half. 7 pass OK.
Flashed bios to lastest version F8 for Gigabyte GA-K8N Ultra-9. Did "Load optimized defaults".
Then, I tried again with CDs, and still the same BSOD error sad.
What's really weird it's that I'm currently using XP on this hardware (another disk partition), to write this mail ... and I have no problems at all.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

Did you try an installation without any driverpacks, only a clean WinXP-Disk?
Also you should check your HD with a tool from the manufacturer.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

I know it sounds rather unrelated, but have you checked for any dust in your case and verified the ariflow is good?

I've had several cases where BSODs (dunno if it was the IRQ !<= error, but that seems the most common, and I don't get any very often) could be traced to that, so it's definately worth a look.
Also check CPU/mobo temp and voltages.

You never know, esp. if it presumably was working fine before in the same constellation!

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

If I remove my boot HD (unplug sata cable for boot hard drive : Raptor 74 GB), then everything works fine ... I can Install XP on other (or/and any) hard disk without any problems.
So I removed all other HDs and tried with all three sata cables : still the same BSOD.
It looks like this Raptor has a problem ... but only when scanned during text mode install, as I'm currently using it under XP while typing this post reply. I'll try a format with WD tools ....

Last edited by maxximum (2007-07-22 21:15:05)

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

try resetting your bios ESCD table and freeing up some recources
Turn off sound on mb (free interupts) setting parrallel port to not use a DMA channel ect...

there are not as many resources to go around in text mode as there are when NT is running in apic

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

Bios ESCD was reset after BIOS upgrade.
I've already tested install once sound card & tv card removed. On mobo, soundcard, parallel port, serial ports, IR, second ethernet LAN port,  second sata chipset are always OFF.
Boot & install is OK with any of my HDs except Raptor 74 Gb ... which is my default boot disk ; and used to work very fine until now :-s.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

Just out of curiousity...

You aren't using a Dell CD as the source, are you?

I have had this same exact issue when I tried using a Dell CD as the source. They have done their own hacking of the txtsetup.sif to add support for their drivers.

Just checking.

Re: [BUG] BSOD with DP_MassStorage 7.07.2 on nForce4

No, using the very same source I use for months (years).
Finally, I've installed on another HD, then ghosted the disk to the Raptor. OS works fine once installed.