Topic: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

I believe this driver set is different than the nVidia that are currently supported.

Giga-byte GA-M55plus-S3G Motherboard
NVIDIA® Quadro NVS 210S + 430 chipset

http://www.gigabyte.com.tw/Support/Moth … uctID=2385

Since this is an integrated MB with video and ethernet included... I'll post my complete Hwid's that are board related...

===========
PCI devices
===========

 
PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&2411E6FE&0&C0: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&2411E6FE&0&C1: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&2411E6FE&0&C2: PCI standard host CPU bridge
PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&2411E6FE&0&C3: PCI standard host CPU bridge
PCI\VEN_104C&DEV_8024&SUBSYS_10001458&REV_00\4&DC268A3&0&7080: Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_10DE&DEV_0245&SUBSYS_D0001458&REV_A2\3&2411E6FE&0&28: NVIDIA Quadro NVS 210S / NVIDIA GeForce 6150LE
PCI\VEN_10DE&DEV_0260&SUBSYS_00000000&REV_A3\3&2411E6FE&0&50: PCI standard ISA bridge
PCI\VEN_10DE&DEV_0264&SUBSYS_02641458&REV_A3\3&2411E6FE&0&51: NVIDIA nForce PCI System Management
PCI\VEN_10DE&DEV_0265&SUBSYS_B0001458&REV_A1\3&2411E6FE&0&68: Standard Dual Channel PCI IDE Controller
PCI\VEN_10DE&DEV_0266&SUBSYS_B0021458&REV_A1\3&2411E6FE&0&70: NVIDIA nForce 430/410 Serial ATA Controller
PCI\VEN_10DE&DEV_0267&SUBSYS_B0021458&REV_A1\3&2411E6FE&0&78: NVIDIA nForce 430/410 Serial ATA Controller
PCI\VEN_10DE&DEV_0269&SUBSYS_E0001458&REV_A3\3&2411E6FE&0&A0: NVIDIA Network Bus Enumerator
PCI\VEN_10DE&DEV_026C&SUBSYS_A0021458&REV_A2\3&2411E6FE&0&81: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_10DE&DEV_026D&SUBSYS_50041458&REV_A3\3&2411E6FE&0&58: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_026E&SUBSYS_50041458&REV_A3\3&2411E6FE&0&59: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_026F&SUBSYS_00000000&REV_A2\3&2411E6FE&0&80: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_0270&SUBSYS_50011458&REV_A2\3&2411E6FE&0&48: PCI standard RAM Controller
PCI\VEN_10DE&DEV_0272&SUBSYS_02641458&REV_A3\3&2411E6FE&0&52: PCI standard RAM Controller
PCI\VEN_10DE&DEV_027E&SUBSYS_50001458&REV_A2\3&2411E6FE&0&07: PCI standard RAM Controller
PCI\VEN_10DE&DEV_027F&SUBSYS_50001458&REV_A2\3&2411E6FE&0&06: PCI standard RAM Controller
PCI\VEN_10DE&DEV_02F0&SUBSYS_50001458&REV_A2\3&2411E6FE&0&00: PCI standard RAM Controller
PCI\VEN_10DE&DEV_02F8&SUBSYS_50001458&REV_A2\3&2411E6FE&0&03: PCI standard RAM Controller
PCI\VEN_10DE&DEV_02F9&SUBSYS_50001458&REV_A2\3&2411E6FE&0&04: PCI standard RAM Controller
PCI\VEN_10DE&DEV_02FA&SUBSYS_50001458&REV_A2\3&2411E6FE&0&01: PCI standard RAM Controller
PCI\VEN_10DE&DEV_02FE&SUBSYS_50001458&REV_A2\3&2411E6FE&0&02: PCI standard RAM Controller
PCI\VEN_10DE&DEV_02FF&SUBSYS_50001458&REV_A2\3&2411E6FE&0&05: PCI standard RAM Controller

I'm able to do some basic testing for these if needed. Currently I'm working with Overflow to test the DP's for BartPE integration which was how I identified this issue. The Chipset drivers worked on a similar board with the 6100 - 430 combination without issues.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

Hi

debugger posted a chipset pack test version shortly after this request.
If you wish to test it, you can look in testing forum.

The answer was 42?
Kind regards, Jaak.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

If I'm understanding debuggers post... it did add some nVidia 520 chipset items... but not the ones specific for this chipset. I could easily be incorrect since I'm not very good with drivers.

I still rebuilt my UBCD4Win using the DP_Chipset_wnt5_x86-32_7056 and the BSOD I was seeing with the previously tested chipset drivers still exist with this one. This BSOD only happens on this chipset combination on the boards I've tested this on... on a system with the 6100 / 430 chipset combination it works fine without incident.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

rdsok, try please DP_Chipset_wnt5_x86-32_612, I was installed WinXP with that DP on Giga-byte GA-M55plus-S3G without BSOD.

And, if you can post here setupapi.log file.

Last edited by Debugger (2007-05-09 19:55:44)

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

Certainly, It will be later this evening after I get home to the system I have with that hardware... 8+ hrs. Thx.

Last edited by rdsok (2007-05-10 02:41:12)

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

Debbugger,

I'm sorry to have to ask this one but...

I'm confused... you said to try DP_Chipset_wnt5_x86-32_612 to see if it resolves the issue. In the Nightlies/old area... the closest one that I see listed is a DP_Chipset_wnt5_x86-32_703.7z version ... Is this the one you mean or is there another you wish me to test with UBCD4Win?

Thanks
Randy

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

rdsok, I haven't this driverpack and I don't know where is it, just I remember my experience. I don't try new DP_Chipset_wnt5_x86-32_7056 witn your mobo because I haven't it now.

I think it important to know what inf file in C\N folder causes BSOD. In DP_Chipset_wnt5_x86-32_704 was updated nForce drivers, I afraid it is cases your BSOD. Post here bsod code and name, and if you can setupapi.log file please.

Last edited by Debugger (2007-05-10 06:06:04)

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

Debugger,

Since it is what is available... I'll first test with the DP_Chipset_wnt5_x86-32_703.7z to see if it makes a difference. Then I'll test the DP_Chipset_wnt5_x86-32_7056 version and isolate which part of the set appears to be causing the issue, this type of testing I can certainly do easily even if it takes some time. Of course I will also post the info you requested as well.


In order to isolate the trouble, last night I already tested with just the N subfolder-inf set and this alone did not produce the BSOD. Tonight I'll start by removing just one subfolder-inf set at a time and see if I can find which one may be affecting it.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

Debugger,

Ok.. here are some testing results for this issue.

Overflow was able to provide the older DP_Chipset_wnt5_x86-32_612 and this also produces a BSOD... so all of the following tests were done with the latest nightly I had which was the DP_Chipset_wnt5_x86-32_7056.

The BSOD error code...

A typical IRQ_NOT_LESS_OR_EQUAL error that is common with driver issues.

STOP 0x0000000A ( 0xFFFFFFD4, 0x00000002, 0x00000001, 0x8043026D )


I've also got several SETUPAPI.LOG files so you can choose which or all of them that may be of use in this issue... http://www.rdsok.net/chipset/setupapi.7z

I've isolated the chipset folder that causes the issue to show up but I didn't isolate which file may be the cause in that folder. The folder that causes the BSOD to happen is the AU folder. The 7z file contains 3 different log files.

setupapi_AU_only.log  - This one causes the BSOD but only had the AU folder included in build.

setupapi_no_AU.log  - This contains all folders EXCEPT the AU folder and doesn't BSOD.

setupapi_all.log - This contains all folders ( including AU ) and causes a BSOD.


Since I'm not sure how familiar you are with a PE build like I'm doing using UBCD4Win verses a full XP build... let me point out some differences. A PE boot doesn't perform a complete PnP initialization... it only does the basic devices. What I am doing after the boot process is then to force a complete HWPnP detection... this is when I see the BSOD. Because of these differences, it is easy to see why the DP you tested with worked ok for you... yet still produced a BSOD for me... the OS does act and react slightly different than a normal XP build.

Overflow and I were speculating about the cause of the BSOD when I first mentioned it to him. I believe what he said may have a good reason for a cause... that the dev ID's aren't matched exactly so a generic match is made instead causing it. Of course this speculation has yet to be proven... but my test results do appear to help support it.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

rdsok
I'm confused...  setupapi_no_AU.log and setupapi_all.log are fully identical (except time). Anytime, I believe AU folder causes BSOD, and it don't logged in setupapi.log. Try to clean AU folder, and add it's inf files one by one, up to that moment when BSOD was appeared.

Last edited by Debugger (2007-05-10 22:47:27)

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

I had planned to test the AU folder futher, it just got too late for me to do it last night.

I believe the reason that those two LOG files are the same is from what I described about the basic PNP detection that a PE build does. It isn't a full hwpnp scan.. it only does select devices at first. While I didn't compare the LOG files because it was getting late, that is why I included each one that I did, I suspected the two you mentioned would be the same.

TIP... the fastest way to isolate the trouble is not to test one at a time but to divide them into groups. For instance, the AU folder currently has 10 INF files total... test the first 5, then the second 5 and depending on which group BSOD's, then split that group up... say test 2 then 3... until you finally work down to the one INF that causes it.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

The trouble is caused by the HIDCLASS.SYS file.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

PS... OverFlow said he was unable to find the hwid's that I posted here... so the request for the drivers to support this board should still stand even though I've isolated the file that causes issues... I agree with him that if the proper hwid isn't matched, that the issue is likely caused by a generic driver getting loaded... at least that makes sense to me.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

rdsok
I'm confused again... HIDCLASS.SYS file don't mentioned in any inf file... how you fond out this file? :-[]

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

Debugger wrote:

rdsok
I'm confused again... HIDCLASS.SYS file don't mentioned in any inf file... how you fond out this file? :-[]

I looked in the folder and it was among the drivers listed. Should this file NOT be copied, after all it is included in with the files?

You are incorrect that the file isn't listed in an INF but this is probably because I'm working with an alpha build that Overflow is working on to allow integration of the driverpacks into BartPE builds. A BartPE build requires additional INF's that tell it what files are needed to be copied to the build. A BartPE build also requires that the drivers that are added are already in place because these are running from read only ( CD ) media.

Again, this isn't about that file really, even though it is causing an issue and may need to be addressed. The only thing that the BSOD has done was point out that this boards drivers were not supported. I even believe that the issue can probably be avoided if the proper drivers are added in the first place so the generic ones do not get used. The current DP's do not directly support the hwid's that this board has. I can probably create my own third party DP, but that would do nothing to help the community which is what I thought the point of reporting missing drivers was for.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

hi
I looked at my backups and found a chipset 702 nightly

I will upload it to OLD, just in case you want this.

The answer was 42?
Kind regards, Jaak.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

jtdoom wrote:

hi
I looked at my backups and found a chipset 702 nightly

I will upload it to OLD, just in case you want this.

I'm not sure that will matter Jaak, as I stated, the hwid's my hardware has are different that what even the current nightly has...

But thanks for the offer,

Randy

Last edited by rdsok (2007-05-12 13:54:47)

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

rdsok
Try to disable LAN, Sound, Internal VGA in BIOS to prevent of BSOD. Try to disable in bios all, what you can smile.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

that will help except he has no video then...

mass needs added minimum and lan will remain as a problem till i get a little farther on the support of that

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

Debugger wrote:

rdsok
Try to disable LAN, Sound, Internal VGA in BIOS to prevent of BSOD. Try to disable in bios all, what you can smile.

I won't be able to disable VGA... can't read braille... lol


I am also not going to be able to get back to this testing soon, I'm now in the middle of beta testing the next release of UBCD4Win which is critical to get released soon. When I do get back to this... I'll also test with the latest 705 releases.

Note: ... I suspect the MB that you had tested on was a differnet revision... the board I'm using is rev 2.1... I know for a fact that the VGA driver is different from the v1 release... the rev 1 driver would not load on a rev 2x MB. I found this out after replacing an older board with a newer rev after the original was killed from a power surge.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

@ALL DRIVERPACKS.NET TEAM MEMBERS

Please keep in mind that rdsok is testing BARTPE support, not a normall install.

This changes everything.

I believe that HIDCLASS.SYS is copied by the coinstaller so it wont be in an inf file.
Pebuilder support is still at alpha stage for this pack and is expected to be buggy at best.

For those that don't know, for a standard bartpe to work, all added drivers are expanded to their respective folders at build time, not boot time, this is why pebuilder support is taking so long to complete. Nore info will follow as time allows.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

And??

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

muiz wrote:

And??

As I stated... I'm now in the middle of beta testing for the next release of UBCD4Win which is critical to get released soon. The UBCD4Win testing must come first even though the drivers are also important also.

I did do some preliminary tests with just the latest chipset drivers ( DP_Chipset_wnt5_x86-32_7051.7z )... but as long as the HIDCLASS.SYS that is included in the AU folder gets parsed into the INF file there will be certain systems that have trouble. This isn't the one that is normally used with XP so certain USB devices will fail as I've reported already.

I'll discuss this with Overflow when I get more time to devote to the drivers. At that time, I"ll also see if the video and other drivers that were not previously supported are working now or not. From the changelog that was posted, it doesn't appear that they were added.

Re: [REQ] NVIDIA Quadro NVS 210S + 430 chipset

hi rdsok
chipsets 7.06 solved issues with ICH7r..

as for that quadro, it sat here waiting on my hard drive.
(mind you, I think that the quadro is something Muiz can handle with a lot more expertise.)

The answer was 42?
Kind regards, Jaak.