Topic: ERROR: Could not delete "C:\DSPdsblr.exe"!

Hello Driverspack's friends, I am a Brazilian fan of this great project!

I'm having a little problem. I'm doing some tests with the KTD included, but at the end of the Windows XP installation (at the time of the DriverPacks Finisher) the DSPdsblr.exe file is not deleted!

It appears the error message: Could not delete "C: \ DSPdsblr.exe!

Without the KTD this problem does not occur...


DPsFnshr.log:
...
2010-08-14 14:15:01 : <CLNP> Deleted "C:\hwids.dat"!
2010-08-14 14:15:01 : <CLNP> Deleted "C:\DPsFnshr.ini"!
2010-08-14 14:15:01 : <CLNP> Deleted "C:\devcon.exe"!
2010-08-14 14:15:01 : <CLNP> Deleted "C:\makePNF.exe"!
2010-08-14 14:15:01 : <CLNP> Deleted "C:\pmtimer.exe"!
2010-08-14 14:15:01 : <ERR>  Could not delete "C:\DSPdsblr.exe"!
2010-08-14 14:15:06 : <CLNP> Deleted "C:\mute.exe"!
2010-08-14 14:15:06 : <CLNP> Deleted "C:\DriverPack_*.ini"!
...


What can I do then to, at least, manually delete with a automatic batch or unattend command the DSPdsblr.exe file after installation??

Thanks!

Last edited by rafaelr (2010-08-15 05:25:11)

Re: ERROR: Could not delete "C:\DSPdsblr.exe"!

Is the file still present after a reboot?

Re: ERROR: Could not delete "C:\DSPdsblr.exe"!

Hello Helmi, sorry for the duplicate posts!

Well, yes the file "DSPdsblr.exe" still present after the reboot (just the DPsFnshr.exe file in C:\ is deleted!)

Where is the file that have the command to delete the DPsFnshr.exe file after the first rebooting?? Because if I could edit this command after the reboot to also delete the file "DSPdsblr.exe" my installation would be perfect!

Thanks for help!

Rafael

Last edited by rafaelr (2010-08-15 09:39:55)

Re: ERROR: Could not delete "C:\DSPdsblr.exe"!

it is not a file... the delete command is added to runonce in the registry by the DriverPacks Finisher...

let's see your DPs_BASE.log please.

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: ERROR: Could not delete "C:\DSPdsblr.exe"!

OverFlow,

Here my DPs_BASE.log:


2010-08-15 10:59:35 : <INIT> DriverPacks BASE 10.06 initialized.
2010-08-15 10:59:35 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2010-08-15 10:59:35 : <INIT> Created temporary working directory.
2010-08-15 10:59:35 : <INIT> Imported proxy settings from Internet Explorer.
2010-08-15 10:59:35 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-08-15 10:59:35 : <INIT>     Detected DriverPack Chipset 10052!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack CPU 1005!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack Graphics A 1005!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack Graphics B 1005!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack Graphics C 1005!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack LAN 1007!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack Mass Storage 1006!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack Sound A 1006!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack Sound B 1006!
2010-08-15 10:59:35 : <INIT>     Detected DriverPack WLAN 1007!
2010-08-15 10:59:35 : <INIT>     Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-08-15 10:59:35 : <INIT>     Finished scanning.
2010-08-15 10:59:35 : <INIT> Could not find settings file"C:\DRIVERSPACK\DPs_BASE.ini".
2010-08-15 10:59:35 : <INIT> [General]\prefLang not specified: default (English) was set.
2010-08-15 10:59:35 : <INIT> [General]\wizdButtons not specified: default (yes) was set.
2010-08-15 10:59:35 : <INIT> [General]\GUI not specified: default (yes) was set.
2010-08-15 10:59:35 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2010-08-15 10:59:35 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2010-08-15 10:59:35 : <INIT> [OptionalSettings]\KTD not specified: default (false) was set.
2010-08-15 10:59:35 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2010-08-15 10:59:35 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2010-08-15 10:59:35 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2010-08-15 10:59:35 : <INIT> QuickStream Cache directory not found!
2010-08-15 10:59:35 : <GUI>  Initialized GUI.
2010-08-15 10:59:35 : <GUI>  Created a list of all available language files.
2010-08-15 10:59:35 : <GUI>  Set the last used language, English, as the GUI language.
2010-08-15 10:59:38 : <GUI>  Refreshed UpdateChecker with success.
2010-08-15 10:59:48 : <GUI>  Changed Windows installation files OR export (depending on the installation platform) location to C:\WINXPSP3.
2010-08-15 10:59:48 : <GUI>  Windows XP Professional -  Retail SP3 detected.
2010-08-15 10:59:48 : <GUI>  wnt5_x86-32_disc is the selected installation platform .
2010-08-15 11:00:48 : <GUI>  Saved settings!
2010-08-15 11:00:48 : <GUI>  Closed GUI.
2010-08-15 11:00:48 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-08-15 11:00:48 : <PREP> Removed all attributes from \I386.
2010-08-15 11:00:48 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2010-08-15 11:00:48 : <SLIP> Created QSC directory.
2010-08-15 11:00:55 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2010-08-15 11:00:55 : <SLIP> C:\DRIVERSPACK\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2010-08-15 11:00:56 : <SLIP> Processing Mass Storage files now. This may take a minute.
2010-08-15 11:01:14 : <SLIP> Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2010-08-15 11:01:14 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2010-08-15 11:01:14 : <SLIP> txtsetup.sif Backed-up Successfully
2010-08-15 11:01:14 : <SLIP> dosnet.inf Backed-up Successfully
2010-08-15 11:01:21 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2010-08-15 11:01:22 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2010-08-15 11:01:50 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2010-08-15 11:01:50 : <SLIP> Created necessary directory structure for method 2.
2010-08-15 11:01:50 : <SLIP> Copying files necessary for method 2.
2010-08-15 11:01:50 : <SLIP> Extracted additional files necessary for method 2.
2010-08-15 11:01:50 : <SLIP> expanded setup.ex_ to setuporg.exe
2010-08-15 11:01:50 : <SLIP> SETUP.EX_ Backed-up Successfully
2010-08-15 11:01:50 : <SLIP> Compressed setup.exe to SETUP.EX_.
2010-08-15 11:01:50 : <SLIP> Method 2 setup.ex_ installed
2010-08-15 11:01:50 : <SLIP> Created \I386\presetup.cmd file.
2010-08-15 11:01:51 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2010-08-15 11:01:51 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2010-08-15 11:01:51 : <SLIP> Copied DriverPack Chipset to \OEM.
2010-08-15 11:01:51 : <SLIP> Copied DriverPack CPU to \OEM.
2010-08-15 11:01:56 : <SLIP> Copied DriverPack Graphics A to \OEM.
2010-08-15 11:02:04 : <SLIP> Copied DriverPack Graphics B to \OEM.
2010-08-15 11:02:08 : <SLIP> Copied DriverPack Graphics C to \OEM.
2010-08-15 11:02:08 : <SLIP> Copied DriverPack LAN to \OEM.
2010-08-15 11:02:08 : <SLIP> Copied DriverPack Mass Storage to \OEM.
2010-08-15 11:02:13 : <SLIP> Copied DriverPack Sound A to \OEM.
2010-08-15 11:02:16 : <SLIP> Copied DriverPack Sound B to \OEM.
2010-08-15 11:02:17 : <SLIP> Copied DriverPack WLAN to \OEM.
2010-08-15 11:02:17 : <SLIP> Copied DriverPacks to \OEM.
2010-08-15 11:02:17 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2010-08-15 11:02:17 : <SLIP> WINNT.SIF Backed-up Successfully
2010-08-15 11:02:17 : <SLIP> Updated \I386\winnt.sif to support method 2.
2010-08-15 11:02:17 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2010-08-15 11:02:17 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2010-08-15 11:02:17 : <SLIP> DP_Install_Tool was copied successfully
2010-08-15 11:02:17 : <SLIP> Slipstream finished in 1 minutes and 29 seconds.
2010-08-15 11:02:20 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang    = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons    = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI        = "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "disc"
; trailing backslash is allowed, but not necessary
location    = "C:\WINXPSP3"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "yes"
2010-08-15 11:02:20 : <CLNP> Create a DPs_Base.log backup @ C:\DRIVERSPACK\LogFiles\DPs_BASE_10-08-15_11-02.log
2010-08-15 11:02:20 : <CLNP> Program terminated.

Re: ERROR: Could not delete "C:\DSPdsblr.exe"!

Some considerations:

1 - If I do NOT use the KTD this problem does not happen, the file "DSPdsblr.exe" is deleted without problems of C: \ !

2 - If I use KTD but not add any add-on with the N-LITE (programs, updates, hotfixes, etc.) did not happen this problem, the file "DSPdsblr.exe" is also deleted from the C: \ !

It seems that this only happens when I add programs and updates with the N-LITE. I realized the DSPdsblr.exe file is the program to close the 'driver signing popups' but it seems that the moment the DriverPacks Finisher try to delete it for some strange reason the DSPdsblr.exe continues to run and so the DriverPacks Finisher can not delete it, and an error message appears on the screen (Could not delete "C:\DSPdsblr.exe"!).

At least this message disappears automatically! But the file 'DSPdsblr.exe' still present at the root C: \ ... sad

Last edited by rafaelr (2010-08-16 02:43:40)

Re: ERROR: Could not delete "C:\DSPdsblr.exe"!

KTD all is a VERY BAD idea... Why have you done this?

KTD is good for TPDPs, like Misc pack, modem pack, monitor pack, etc... 

IE it is very unlikely that you will need to keep Chipset drivers (do you change your MB everyday?)
Most drivers will not work with KTD (because the DriverPacks Finisher needs to run to complete the installation of many drivers)

Was DriverPacks the LAST step in your process? (Extremely important!)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

Re: ERROR: Could not delete "C:\DSPdsblr.exe"!

Hello OverFlow,

Yes, I always leave the DriverPacks integration in the last step!

The use of KTD, actually, it's only because I always make 3 versions of my Windows XP ISOs modified.

1 - Only the changes, configurations, updates and add-ons with the N-LITE, without drivers!
2 - N-LITE + DriversPacks (without KTD)
3 - N-Lite + + DriversPacks KTD

In fact, I even use the version 2.

I guess I will not care much about this file "DSPdsblr.exe" staying in root C:\, in my ISO version with KTD, because I just delete it in root after the instalation! This is not even necessarily a problem ... smile And the good in DRIVER BASE version 10.06 is in that way no longer appears those endless 'driver signing popups' in KTD mode.

I've been reading that the option of using the SAD seems to be more interesting than the KTD, I just make an ISO here only with the changes of N-LITE (without integrating the DriverPacks!) and added the folder 'DrivePacks' with the drivers in SAD mode and I am testing on my laptop in this moment... hehehe

Confirms one thing, in SAD, after installation, I just run the file "DP_Install_Tool.cmd", correct??

Thank you for your attention and congratulations for the excelent job!


Rafael

Re: ERROR: Could not delete "C:\DSPdsblr.exe"!

Good feedback Rafael,

KTD (with the full set of packs) burns about three gig of disc space and is almost useless. (I could see KTD as useful with 3rd party DriverPack printer, modem, monitor...) but most hardware like Chipset and CPU is never going to change after the install tongue.

SAD does not work quite as well as integrated drivers for an install... But is totally awesome for updating a working system or for adding hardware to a running system big_smile. SAD is automatically included if you slipstream the DriverPacks (#2 above).

Yes, just run DP_Install_Tool.cmd... What could be easier!

YUP... Since i removed DoPNF from KTD the  DSPdsblr.exe may no longer be neccessary at all... (that is what caused most if not all of the popups)

Next time I dive into the code I'll evaluate your feedback on KTD and A) see if DSPdsblr.exe is even still required and B) See if I can make sure that DSPdsblr.exe is removed after the reboot IF the finisher itself fails to delete it as it should.

Thanks again ... you have helped us to help you !

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.