You are not logged in. Please login or register.
I have a problem which I have reported in the UBCD4WIN forum but it may be a problem with the MassStorage Pack drivers and not UBCD4WIN.
After building in which I carefully ensured that the mass storage driver pack was funcional using your excellent help file I cannot get the booted UBCD4WIN to recognise the hard drives in my system.
I am a complete newbie at this game but is there some way of checking that the drivers are in fact loaded?
Welcome to DriverPacks MacNala,
Please see read before you post... in my signature below.
It helps newbies give us the details we need to help you. 
if you look at the Post just a few down from yours,
you will see an example of half-way decent details in a first post
and a possable solution in the second. 
http://forum.driverpacks.net/viewtopic.php?id=3799
copy the mass storage driver from my link to your Plugin\Driverpacks.net\Base\DriverPacks\ folder (with the existing mass pack in it already)
From PeBuilder select Plugins and then BASE hit the config button with BASE highlighted.
make sure the mass pack is the current ver and enabled.
LAN and WAN are optional, and Graphics should not be enabled.
Tutorial for PE is in my signature or if you hit the help button when BASE is highlighted in PE builder plugins page.
let us know if you have questions
I am sorry to have troubled you with multiple posts but I received incomplete instructions.
You must remember that those of us who are not steeped in this subject have a very steep learning curve.
You can give all the instructions you want but if they are not intelligible to the receiver the result is confusion at our end as well.
I am of the opinion that most of the instructions given to queriers consist of references to previous threads which themselves refer to other threads and don't answer the question.
I did read all the information suggested but it did not help.
Please consider this post my last on this subject.
Well you have posted three times and we still don't have your HWIDs... I assume that is somehow our fault?
You still have not even divulged which version of UBCD4win you were using - entirely my fault sorry...
you posted no questions regarding my tutorial nor my provided instructions... also obviously my fault sorry again.
If I beg an plead for you to stay and promise to pry every single detail out of you one by one by asking each question dozens of times....
Lets review from read before you post...
6. Tell us what you did - Could we try to reproduce your issue ourselves just based on your first post?
Well let's see
I don't know which version of UBCD4Win
I don't know which OS you used
I don't know which Service Pack of that OS you used
I don't know which Mass storasge controller is not found
I don't have the HWIDs of the device.
I can't even begin to duplicate your issue can I... Sorry, once again my fault,
No really! I totaly forgot we are also the psychic-network.com! (you're a total clown dude)
I am so sorry you are leaving now...
Since I really needed someone to waste some more of my time...
Did you read "Read BEFORE you post"?
NO you did not, and even if you did you checked off ZERO of the items on the list...
Please read our posting guidlines again... http://forum.driverpacks.net/viewtopic.php?id=3741
If you will expect us to take our personal time to support you, then we can likewise expect:
a) You will take a minute to include good details in your post.
b) You will have already read our documentation and tutorials.If one of the team seems to have been short with you...
Perhaps you should make sure you have been respectful / appreciative.
We are working for free.Think: "Could I reproduce my issue with just the info I have provided in my post and title?"
This does not need to be a wordy or involved task. In Example (IE)Title "[BUG] Finsher - Base 8.12.4 - Sound A 9.01 & Sound B 9.01"
I used RVM to add SP3 and updates to my XP, then nLite to automate it, I run DriverPacks BASE with all packs and mass textmode, then create ISO with nLite.
Sound drivers are installed but the Control panel is not.
The relevant part of the finisher log is included below.
the HWID for the sound card is PCI/VenxxxxSubxxxRev12Code:
LOG here
If the answer to "Could I reproduce..." is 'yes',
and you have double checked "Read BEFORE you post" (AKA rule 0.)
Then you should be welcomed with open arms - and possibly breakfast.
Bye bye now... Unless you are going to get your act together
- and don't forget to engage your brain before posting. 
Please note you were one post away from being banned anyway
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.018 seconds, 8 queries executed ]