Topic: [REQ] mass tag missing...
multiple versions includeing DP_MassStorage_wnt5_x86-32_8021
ms_1_exc_replaceIfOS="wxp,w2k3"
needs to be ms_1_exc_replaceIfOS="w2k,wxp,w2k3"
Because this driver Does exist natively in windows 2000 the OEM driver will get deleted if it is not tagged as "replace"
explained:
Base checks to see if it was previously run.
if it discovers that this is not the first time base was run it removes the previous install.
base checks the entire mass ini for file names.
all names that are not tagged as "replace" get deleted. PERIOD.
IE if an OEM driver.sy_ was marked as Replace and Skip
skip = then it will not get backed up to .org and it will not be replaced / updated.
replace = it will not get deleted if base is rerun on a source (it's a native windows file)
and if there is no "driver.org" file then it also won't get restored
So if a driver.sy? name exists natively in windows\I386 it is by definition a "replacement"
it may also be marked as skip
Don't use the windows 2000 disable exception on a replacement driver. (use skip)
[L2]
ms_count=1
ms_1_deviceName="LSI Logic MegaRAID Enterprise 1200 RAID Controller"
ms_1_tag="mraid35x"
ms_1_sysFile="Mraid35x.sys"
ms_1_hwids="PCI\VEN_101E&DEV_9010,PCI\VEN_101E&DEV_9060,PCI\VEN_8086&DEV_1960&SUBSYS_0438101E,PCI\VEN_8086&DEV_1960&SUBSYS_0466101E,PCI\VEN_8086&DEV_1960&SUBSYS_0467101E,PCI\VEN_8086&DEV_1960&SUBSYS_0471101E,PCI\VEN_101E&DEV_1960&SUBSYS_0471101E,PCI\VEN_8086&DEV_1960&SUBSYS_0490101E,PCI\VEN_8086&DEV_1960&SUBSYS_0493101E,PCI\VEN_101E&DEV_1960&SUBSYS_0493101E,PCI\VEN_1000&DEV_0407&SUBSYS_05301000,PCI\VEN_1000&DEV_0408&SUBSYS_00011000,PCI\VEN_1000&DEV_0408&SUBSYS_00021000,PCI\VEN_8086&DEV_1960&SUBSYS_0762101E,PCI\VEN_8086&DEV_1960&SUBSYS_0475101E,PCI\VEN_101E&DEV_1960&SUBSYS_0475101E,PCI\VEN_1011&DEV_0046&SUBSYS_0489101E,PCI\VEN_8086&DEV_B555&SUBSYS_0489101E,PCI\VEN_101E&DEV_1960&SUBSYS_0494101E,PCI\VEN_8086&DEV_1960&SUBSYS_0494101E,PCI\VEN_101E&DEV_1960&SUBSYS_0503101E,PCI\VEN_8086&DEV_1960&SUBSYS_0503101E,PCI\VEN_101E&DEV_1960&SUBSYS_0511101E,PCI\VEN_1000&DEV_1960&SUBSYS_A5201000,PCI\VEN_1000&DEV_1960&SUBSYS_05181000,PCI\VEN_1000&DEV_1960&SUBSYS_05201000,PCI\VEN_1000&DEV_0407&SUBSYS_05311000,PCI\VEN_1000&DEV_0407&SUBSYS_05321000,PCI\VEN_101E&DEV_1960&SUBSYS_0522101E,PCI\VEN_1000&DEV_1960&SUBSYS_05221000,PCI\VEN_1000&DEV_1960&SUBSYS_05231000,PCI\VEN_1000&DEV_1960&SUBSYS_45231000,PCI\VEN_8086&DEV_1960&SUBSYS_10C6103C,PCI\VEN_8086&DEV_1960&SUBSYS_10C7103C,PCI\VEN_8086&DEV_1960&SUBSYS_10CC103C,PCI\VEN_8086&DEV_1960&SUBSYS_10CD103C,PCI\VEN_101E&DEV_1960&SUBSYS_60E7103C,PCI\VEN_101E&DEV_1960&SUBSYS_60E8103C,PCI\VEN_8086&DEV_1960&SUBSYS_0431101E"
ms_1_isBusExtender=false
ms_1_exc_replaceIfOS="w2k,wxp,w2k3"
ms_1_exc_skipIfOS="w2k"Setting MS count to 0 will disable adding a driver
and prevent the removal the drivers .sys file during the prep stage if it was previously streamed by base.
I hope this helps with the mass mystery
The DriverPacks, the DP_Base program, and Support Forum are FREE!.
