• Registered: 2007-11-16
  • Posts: 2

Topic: MassStorage Pack always greyed out.

I'm trying to slipstream the mass storage driver pack using DriverPacks Base 7.05.2 into BartPE but all options except DriverPack MassStorage Text mode are greyed out.  I'm trying to get BartPE to load from my Kingmax 1GB flash drive.  It boots fine, BUT...

I've placed the DP_MassStorage_wnt5_x86-32_7092.7z file (Unzipped) into c:\dpbase\DriverPacks and then I load the .exe from c:\dpbase.  It only lets me click the MassStorage checkbox if I set Location as disc instead of BartPE.  I tried with disc anyway but BartPE won't boot..complaining that atiide.sys is missing (I could see this along with several other files as missing when it's compiling bartpe, displaying them as warnings). 

I unzipped the .7z driver pack to make sure atiide.sys is there and it is.

The tutorial seems to show you only how to do it for disc but not for bartpe. 

I read somewhere I may need to create a plugin for this driverpack? How do I do that, if I need to?  There are NO instructions whatsoever on how to do what I want with the driver pack.

The reason may be because DP_MassStorage    = "no" but whenever I edit the file and change it to "yes" it just changes back to "no" after I load DP and exit.

Oh, I've also tried putting the 7z driverpack file into WINDOWS\DriverPacks (unzipped)  since it refers to it in the .ini file below but same problem.

I've spent hours trying to fix this now.  Any help to this newbie would be appreciated.

My DPs_BASE.ini:

[General]
; preferred language
prefLang    = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons    = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI        = "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "bartpe"
; trailing backslash is allowed, but not necessary
location    = "C:\pebuilder3110a\BartPE"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage    = "no"
DP_MassStorage_textmode = "yes"

Warning messages in pebuilder.log:

Processing driver IDs
Checking for missing files
Warning: File "3ware95k.sys" not found
Warning: File "3ware9k.sys" not found
Warning: File "3waregsm.sys" not found
Warning: File "aec6210.sys" not found
Warning: File "aec6260.sys" not found
Warning: File "aec6280.sys" not found
Warning: File "aec68x5.sys" not found
Warning: File "aec6880.sys" not found
Warning: File "aec6897.sys" not found
Warning: File "aec67160.sys" not found
Warning: File "aec671x.sys" not found
Warning: File "aac.sys" not found
Warning: File "aar1210.sys" not found
Warning: File "adpu320.sys" not found
Warning: File "aadpu320.sys" not found
Warning: File "a320raid.sys" not found
Warning: File "cda1000.sys" not found
Warning: File "amdbusdr.sys" not found
Warning: File "arcm_x86.sys" not found
Warning: File "ahcix86.sys" not found
Warning: File "m5228.sys" not found
Warning: File "m5281.sys" not found
Warning: File "m5287.sys" not found
Warning: File "m5288.sys" not found
Warning: File "m5289.sys" not found
Warning: File "CPQ32FS2.sys" not found
Warning: File "cpqcissm.sys" not found
Warning: File "hpcissm2.sys" not found
Warning: File "cpqarry2.sys" not found
Warning: File "cercsr6.sys" not found
Warning: File "hpt3xx.sys" not found
Warning: File "rhpt3xx.sys" not found
Warning: File "hpt374.sys" not found
Warning: File "hptmv.sys" not found
Warning: File "hpt366.sys" not found
Warning: File "hptmv6.sys" not found
Warning: File "rr232x.sys" not found
Warning: File "2310_00.sys" not found
Warning: File "rr174xp.sys" not found
Warning: File "ahpt3xx.sys" not found
Warning: File "ipsraidn.sys" not found
Warning: File "nfrdx960.sys" not found
Warning: File "aacsas.sys" not found
Warning: File "adp94xx.sys" not found
Warning: File "raidsrc.sys" not found
Warning: File "iastor55.sys" not found
Warning: File "iastor62.sys" not found
Warning: File "iastor76.sys" not found
Warning: File "iteraid.sys" not found
Warning: File "jraid.sys" not found
Warning: File "megaide.sys" not found
Warning: File "symmpi.sys" not found
Warning: File "Mraid2k.sys" not found
Warning: File "mv61xx.sys" not found
Warning: File "mv614x.sys" not found
Warning: File "mvsata.sys" not found
Warning: File "nvatabus.sys" not found
Warning: File "nvraid.sys" not found
Warning: File "fasttxxp.sys" not found
Warning: File "s150sx8.sys" not found
Warning: File "fastsx.sys" not found
Warning: File "sptrak.sys" not found
Warning: File "ulsata.sys" not found
Warning: File "ulsata2.sys" not found
Warning: File "fttxr52P.sys" not found
Warning: File "prfsx4xp.sys" not found
Warning: File "fst376xp.sys" not found
Warning: File "ide376xp.sys" not found
Warning: File "ql2100.sys" not found
Warning: File "ql2200.sys" not found
Warning: File "ql2300.sys" not found
Warning: File "pnp649r.sys" not found
Warning: File "pnp680r.sys" not found
Warning: File "si3112r.sys" not found
Warning: File "ati3112r.sys" not found
Warning: File "si3114r.sys" not found
Warning: File "si3124r.sys" not found
Warning: File "si3124r5.sys" not found
Warning: File "si3132r5.sys" not found
Warning: File "pnp680.sys" not found
Warning: File "si3112.sys" not found
Warning: File "si3114.sys" not found
Warning: File "si3124.sys" not found
Warning: File "si3132.sys" not found
Warning: File "ASH1205.sys" not found
Warning: File "sisraid1.sys" not found
Warning: File "sisraid.sys" not found
Warning: File "sisraid2.sys" not found
Warning: File "sisraid4.sys" not found
Warning: File "viamraid.sys" not found
Warning: File "viapdsk.sys" not found
Warning: File "videX32.sys" not found
Warning: File "vmscsi.sys" not found
Warning: File "ATIIDE.sys" not found
Warning: File "ViBus.sys" not found
Build ISO image

Even if I remove the references to these files from txtsetup.sif in the XP SP2 source dir it still gives me those errors.

Last edited by andrew.cz (2007-11-16 08:53:35)

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: MassStorage Pack always greyed out.

Hi,
Welcome to DriverPacks.

The downloaded archive must be placed in \driverpacks folder.
You don't put unzipped files there.
dpsBase will unzip and process the archive.

(sorry.. yesterday I wrote a longer post, and submitted it, but it got lost in a forum glitch?)

The answer was 42?
Kind regards, Jaak.
  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: MassStorage Pack always greyed out.

Hi,
Welcome to DriverPacks.

The downloaded archive must be placed in \driverpacks folder.
You don't put unzipped files there.
dpsBase will unzip and process the archive.

(sorry.. yesterday I wrote a longer post, and submitted it, but it got lost in a forum glitch?)

The answer was 42?
Kind regards, Jaak.
  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: MassStorage Pack always greyed out.

as jaak said dont unzip your packs they are ready to go as is. (that is in the tutorial).

The base is meant to lead you through the steps and is intuitive.

Since you had no mass storage pack available and had the wrong plugin folder specified for location several things would have led you to the finish line. Since the wrong folder was given you would have been immediately take to the UpdateChecker screen which would have indicated you had no local mass storage pack and that a newer version was on the server. (it tried to tell you the pack was not there). If you had the correct folder specified it would have shown mass storage text as greyed out (not available - no really, not available -- hey buddy really it's not here!) When the correct location is given for bartpe the OS= will change from N/A to OS= bartpe (a hint is given in the description box "BartPE: the \plugin directory to which driverpacks will be exported").

if you have the pack available and if you point to the bartpe\plugin\ folder and hit the slipstream button in base

you should then find two new plugins in pebuilder under plugins - base and mass.
Base should be disabled
and Mass should be enabled.


DriverPacks plugin is included with UBCD4win (BartPE on steroids) http://www.ubcd4win.com/downloads.htm
it needs to be configured from <<plugins>> in pebuilder before you build your ISO. that might be easier for you.

Last edited by OverFlow (2007-11-17 12:48:04)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: MassStorage Pack always greyed out.

ask and ye shall recieve

BartPE [beta] help file http://users.pandora.be/jtdoom/basetute … lpFile.htm

Last edited by OverFlow (2007-11-17 21:49:05)

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website