• Registered: 2008-11-02
  • Posts: 2

Topic: Problem with Nlite installation.

Hello everyone. I have a problem with the installation of drivers .

I create an unattended windows xp version with Nlite , updates , hotfixes, and other things but without integrating drivers into Nlite .

At first I could integrate the drivers with Drivers Base without any problem. But then for some reason while I was editing the installation of windows , began to give me the error : dpsfnshr.exe not found during the first login. And the drivers were not installed .

At first I thought I was wrong in the method of integration. Then install the drivers first, before Nlite . But it appeared the error dpsfnshr.exe not found.

Then install the drivers after Nlite and followed with the same error . The drivers do not install .

All the tests I've done have always been clean installation.

Reviewing the problem , I saw Drivers Base modifies 3 files , DOSNET.INF , TXTSETUP.SIF and WINNT.SIF .

If first modify the installation of windows with Nlite and then integrated the drivers , get those 3 files without the modifications made by the Nlite .

But if I install the drivers first , then use Nlite, the same thing happens, Nlite modifies the files and drivers are not installed .

I do not know what to do ?

Here is the log of Driver Base .

2014-02-08 22:21:11 : <INIT> DriverPacks BASE 10.06 initialized.
2014-02-08 22:21:11 : <INIT> Host environment: UNKNOWN  X64 on a X64 CPU.
2014-02-08 22:21:33 : <INIT> Old temporary working directory deleted.
2014-02-08 22:21:33 : <INIT> Created temporary working directory.
2014-02-08 22:21:33 : <INIT> Imported proxy settings from Internet Explorer.
2014-02-08 22:21:33 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack Chipset 1209!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack CPU 1005!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack Graphics A 1206!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack Graphics B 1206!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack Graphics C 1206!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack LAN 1205!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack Mass Storage 1209!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack Sound A 1111!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack Sound B 1111!
2014-02-08 22:21:33 : <INIT> 	Detected DriverPack WLAN 1202!
2014-02-08 22:21:33 : <INIT> 	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2014-02-08 22:21:33 : <INIT> 	Finished scanning.
2014-02-08 22:21:33 : <INIT> Detected settings file "E:\TORRENTS\DRIVERS\DPs_BASE.ini".
2014-02-08 22:21:33 : <INIT> Windows XP Professional -  OEM SP3 detected.
2014-02-08 22:21:33 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2014-02-08 22:21:33 : <INIT> Imported settings from settings file.
2014-02-08 22:21:33 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2014-02-08 22:21:33 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2014-02-08 22:21:33 : <GUI>  Initialized GUI.
2014-02-08 22:21:33 : <GUI>  Created a list of all available language files.
2014-02-08 22:21:33 : <GUI>  Set the last used language, English, as the GUI language.
2014-02-08 22:21:42 : <GUI>  Refreshed UpdateChecker with success.
2014-02-08 22:22:34 : <GUI>  Saved settings!
2014-02-08 22:22:34 : <GUI>  Closed GUI.
2014-02-08 22:22:34 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2014-02-08 22:22:34 : <PREP> Removed all attributes from \I386.
2014-02-08 22:22:34 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2014-02-08 22:22:34 : <SLIP> Created necessary directory structure for method 2.
2014-02-08 22:22:34 : <SLIP> Copying files necessary for method 2.
2014-02-08 22:22:34 : <SLIP> Extracted additional files necessary for method 2.
2014-02-08 22:22:34 : <SLIP> expanded setup.ex_ to setuporg.exe
2014-02-08 22:22:34 : <SLIP> SETUP.EX_ Backed-up Successfully
2014-02-08 22:22:34 : <SLIP> Method 2 setup.ex_ installed
2014-02-08 22:22:34 : <SLIP> Created \I386\presetup.cmd file.
2014-02-08 22:22:34 : <SLIP> txtsetup.sif Backed-up Successfully
2014-02-08 22:22:34 : <SLIP> dosnet.inf Backed-up Successfully
2014-02-08 22:22:34 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2014-02-08 22:22:34 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2014-02-08 22:22:34 : <SLIP> Copied DriverPack Chipset to \OEM.
2014-02-08 22:22:34 : <SLIP> Copied DriverPack CPU to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPack Graphics A to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPack Graphics B to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPack Graphics C to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPack LAN to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPack Mass Storage to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPack Sound A to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPack Sound B to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPack WLAN to \OEM.
2014-02-08 22:22:35 : <SLIP> Copied DriverPacks to \OEM.
2014-02-08 22:22:35 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2014-02-08 22:22:35 : <SLIP> WINNT.SIF Backed-up Successfully
2014-02-08 22:22:35 : <SLIP> Updated \I386\winnt.sif to support method 2.
2014-02-08 22:22:35 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2014-02-08 22:22:36 : <SLIP> Updated E:\Proyecto Xp Desatendido\XP LIMPIO\$OEM$\cmdlines.txt to execute ROE.exe.
2014-02-08 22:22:36 : <SLIP> DP_Install_Tool was copied successfully
2014-02-08 22:22:36 : <SLIP> Slipstream finished in 2 seconds.
2014-02-08 22:22:37 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "E:\Proyecto Xp Desatendido\XP LIMPIO"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID		= "default"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_Graphics_A	= "yes"
DP_Graphics_B	= "yes"
DP_Graphics_C	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_Sound_A	= "yes"
DP_Sound_B	= "yes"
DP_WLAN		= "yes"
DP_MassStorage_textmode = "no"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl		= "CCC"
Nvidia_cpl	= "2"
2014-02-08 22:22:37 : <CLNP> Create a DPs_Base.log backup @ E:\TORRENTS\DRIVERS\LogFiles\DPs_BASE_14-02-08_22-22.log
2014-02-08 22:22:37 : <CLNP> Program terminated.

Sorry for my English! hmm

  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Problem with Nlite installation.

RTFM

IF you read the directions you will not have this issue.

the tutorials are everywhere. on our home page linked in our signatures and in the FAQ section of the site.

http://driverpacks.net/docs/beginners-guide-windows-xp
0) Pay particular attention to the CAUTION printed in BOLD

We plaster this info everywhere.

nLite will quite often corrupt your source...
although i do use it myself for certain things, like making the ISO for example.
RVM integrator is a much better way to go.

1) YOU CAN NOT... I repeat CAN NOT modify your source after you add the driverpacks.
MOST ESPECIALLY with nLite, If you run nLite after DriverPacks you absolutely WILL (guaranteed) end up with GARBAGE.

2) DriverPacks must be the LAST step in your process ----> the LAST step <----  This is made clear in EVERY tutorial we have printed.  read the directions and you will not have issues. We are NOT the support forum for nLite, thank god.

3) Follow our simple directions. modify source first, then add DriverPacks. 
4) Once DriverPacks is added to your source, you CAN NOT make further changes to your source.
5) Read that again...
6) OK, now read it again... Got it now?

It's really easy if you follow our simple directions. (RTFM)
please note all the numbered items say the same thing as the caution in the tutorial.
Most of the non numbered items tell you the read the directions.

you failed to also read "read before you post" linked in my signature and agreed by you that you have read when you signed up. You didn't follow the instructions you were provided multiple times and now you wonder why you have issues???

Start over with a CLEAN source, your current source is corrupted and CAN NOT be salvaged.

Follow the directions and then please come back and tell me what happened  big_smile.

Please note: if you think i have been harsh DriverPacks is not, and has never been, a noob friendly site like MSFN.org. Failure to follow directions or RTFM is a noob mistake.  And yes I know you have been a member for five years, it's still a noob mistake big_smile.

Welcome back to DriverPacks!

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • TechDud
  • Researcher & DriverPacks Moderator
  • Offline
  • From: Fraser Valley, Canada
  • Registered: 2010-11-23
  • Posts: 2,270

Re: Problem with Nlite installation.

The line that is most telling is "DP_MassStorage_textmode = "no"".     hmm

Do we have confirmation that the latest recent updates to nLite still corrupt source?

I have used nothing but RVMi & DPs_BASE for all integrations & love their stability.

  Avoiding the "OnePiece Updates" means that the install "CD" need not be inserted every time a new device is plugged in!

  Disc install is the only "official" supported method for installation, yet have had great success with WinSetupFromUSB 1.0beta8.  Looking forward to trying the latest WinSetupFromUSB v1.3 (with D-P-M-S.iso disabled, of course).  As i have no eXPerience with the latest, if you eXPerience trouble, use v1.0 beta8, if you must install from USB.  I like it (except on legacy chipsets), as the initial textmode whizzes by, and Setup with 2GB worth of drivers still achieves the Desktop in about a half-hour.

As you can tell, i read TFM a long time ago!     big_smile
   IIRC, nLite is still mentioned there....  yikes

Anonymous on Tue, 10/13/2009 wrote:

"It is highly recommended that you use either nLite or the RyanVM Integrator to integrate all current hotfixes prior to integrating DriverPacks."

might need to be updated to read:

"It is highly recommended that you use the RyanVM Integrator to integrate all current hotfixes prior to integrating DriverPacks."

That is, if the latest nLite still corrupts source.

Last edited by TechDud (2014-02-18 12:24:27)

Forum Rules & Guidelines   HWID's tool   Unknown Devices (Win7-max) LatencyMon - NT6.x
MemTest86+    Video Memory Stress Test    D-P-C Driver Latency Tester (Win7-max)
http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/5NQ1BpqvDa_0vDwtHeoZCcSJjOVNuvMXSp4i7SE7DQA/perpetual:forever/userbar/moderator-1.png
  • OverFlow
  • DriverPacks Administrator & BASE Developer
  • Offline
  • From: Cincinnati
  • Registered: 2006-12-02
  • Posts: 6,730

Re: Problem with Nlite installation.

It really depends what you choose to do with nLite. Some features work great others do not. I am not going to list them. Most are related to how nLite adds registry entries.  if you have used nLite with WSUSB then you know nLite is still broke tongue. Again I use nLite myself for certain tasks, it's "OK" RVMI is "GREAT". if you use RVMI then you don't have any problems. I can use nLite successfully because I don't need it, I know where the issues are why they are and how to address them if needed. Many of our users are at this same level, or higher. Ricktendo for example,  CDOB, etc... some of the sharpest minds in the industry pop in and out of here all the time. We are  blessed. Soooo my advise is use nLite but only if you don't need it LOL.

Honestly TD I think he is trying to modify someone else's work, the last time I saw this kind of a post it was our good friend FvcknutFour.

here is the KEY line from his post

If first modify the installation of windows with Nlite and then integrated the drivers , get those 3 files without the modifications made by the Nlite .

That SCREAMs dirty source. the first thing BASE does is restore the original files if it finds a previous DriverPacks BASE install. Soooo, he said he started clean but that is a lie because he said his nLite changes were missing. They are missing because BASE restored the files from when it was run previously. Therefore hi ssource was not clean and he lied.

Being lied to pisses me off. thus my attitude in the response.

I got this guy TD... don't need any help. I was just waiting to see if he would lie to me again, then I was going to ban him.

But thanks for always being so kind and helpful, but there are other lines that are way more telling than the one you picked out tongue.

I was going to give him the benefit of the doubt and not call him a liar in open forum, since it may have just been sloppy work. Sloppy work is only annoying, which is why I tempered my answer to only address laziness / sloppiness and not give a response appropriate to an outright liar. The last time I was here the poster (FuknutFour) was also a pie-rat. When people tell me what they had happen I know EXACTLY what they did. Sometimes I need more info to determine their character and intent.
In this case a wanted to know if they were using a pirated source from the internet. The answer I gave fixes the issue guaranteed. The response I had hoped not to get was "I didn't use a clean source, I got if from the net.",  that response is the ban response tongue.

The fact we got no response tells me he was not lying, just sloppy. LOL
People never post when everything is working fine wink

Jeff

DP BartPE Tutorial   DP_BASE Tutorial   HWID's Tool     Read BEFORE you post    UserBars!
http://driverpacks.net/userbar/admin-1.png
The DriverPacks, the DP_Base program, and Support Forum are FREE!.

OverFlow's Website

  • From: Victorville, California
  • Registered: 2007-12-07
  • Posts: 278

Re: Problem with Nlite installation.

It's been ten days since the first post - sure would be nice if that person had made the decision to come back and avail themselves of all the information provided by the experts.

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/ajoHKH618C_cS2O6V00_aY3Cse0ggjzP4uxI8Hk5viw/perpetual:forever/userbar/donator-3.png