Search options

2012-10-26 21:22:11

Nforce 630A (Asrock ALiveNF7G-HD720p R5.0 ) in RAID0 , HW id:PCI\VEN_10DE&DEV_0558

Raid is configured and marked as HEALTHY is detected properly in dos programs as Norton Ghost.

01 - don't see my HD
02 - don't see my HD
03 - don't see my HD
04 - don't see my HD
05 - don't see my HD
06 - don't see my HD
07 - don't see my HD
08 - don't see my HD
09 - don't see my HD
10 - don't see my HD
11 - don't see my HD
12 - don't see my HD
13 - don't see my HD
14 - don't see my HD
15 - don't see my HD
16 - don't see my HD
17 - don't see my HD
18 - don't see my HD

Latest DP_MASStorage v12.09 -> don't see my HD

2012-10-26 09:49:18

Finally I installed in ide mode then with this batch (executed in booted Windows xp IDE MODE) and copying the ahcix86.sys to C:\Windows\System32\drivers i was able to change to AHCI and boot.

@echo off
reg add "HKLM\SYSTEM\CurrentControlSet\Services\ahcix86" /f
reg add "HKLM\SYSTEM\CurrentControlSet\Services\ahcix86\Enum" /f
reg add "HKLM\SYSTEM\CurrentControlSet\Services\ahcix86" /v Type /t REG_DWORD /d 1 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Services\ahcix86" /v Start /t REG_DWORD /d 0 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Services\ahcix86" /v Group /t REG_SZ /d "SCSI miniport" /f
reg add "HKLM\SYSTEM\CurrentControlSet\Services\ahcix86" /v ErrorControl /t REG_DWORD /d 1 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Services\ahcix86" /v ImagePath /t REG_SZ /d "system32\drivers\ahcix86.sys" /f
reg add "HKLM\SYSTEM\CurrentControlSet\Services\ahcix86" /v tag /t REG_DWORD /d 4 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\PCI#VEN_1022&DEV_7801&CC_0106" /v Service /t REG_SZ /d "ahcix86" /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\PCI#VEN_1022&DEV_7801&CC_0106" /v ClassGUID /t REG_SZ /d "{4D36E97B-E325-11CE-BFC1-08002BE10318}" /f
pause

If you need to change your drive to AHCI, change the reg key \PCI#VEN_1022&DEV_7801&CC_0106" by your hardware id.

And if you have another hardware you can change the ahcix86.sys by your sys file and the hardware id key \PCI#VEN_1022&DEV_7801&CC_0106" by your hardware id.

2012-10-25 22:58:19

Hello

I have a new motherboard Asrock A55DEL with amd A55 chipset and one sata ahci HD.

The id is:

PCI\VEN_1022&DEV_7801&CC_0106

The device is detected on clean windows XP (not nlited or modified, only driverspack) in install as ahcix80x installs well, continues to T13 windows install and then when finish and try to start windows gives a BSOD and reboot.

2012-10-22 01:48:40

Tried but not detected in both motherboards.

This is why i think that is driverpack base problem and not driverspack masstorage.

2012-10-20 00:29:11

tested on another Nforce 630A motherboard with same results (M2N68-AM SE2)

The driver doesn't works and doesn't detect the array, if i put a diskette and the cdrom with drivers = no array.

I i put the diskette and cdrom without drivers (commented all nforce) = yes array.

2012-10-03 01:14:34

I found the problem the problem was this.

The raid class is detected as
*NVRAID20="nvrd327r"

But nvrd327r doesn't works with nforce630A.

I don't know why.

If I put a diskette and press F6 for install my drivers the windows remplaces nvrd32 from my diskette with the driverspack masstorage nvrd327r, I had to comment the line of nvraid20 from txtsetup to use my diskette.

Then it's detected but when copy it tries to copy from cdrom instead diskette that is the source of my driver.

It could be some problems with driver pack base?

2012-10-02 06:30:46

Hello, again!

I did the modification that you tell me and it doesn't work I used a several drivers without success.

The motherboard model is:Asrock ALiveNF7G-HD720p R5.0

http://www.asrock.com/mb/overview.us.as … 20p%20R5.0

=========== 
PCI Devices 
=========== 
PCI\VEN_1002&DEV_7142&SUBSYS_01421043&REV_00\4&32835273&0&0058: Video Controller (VGA Compatible)
PCI\VEN_1002&DEV_7162&SUBSYS_01431043&REV_00\4&32835273&0&0158: Video Controller
PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&267A616A&0&C0: PCI HOST Bridge
PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&267A616A&0&C1: PCI HOST Bridge
PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&267A616A&0&C2: PCI HOST Bridge
PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&267A616A&0&C3: PCI HOST Bridge
PCI\VEN_10DE&DEV_0542&SUBSYS_05421849&REV_A2\3&267A616A&0&09: SM Bus Controller
PCI\VEN_10DE&DEV_0543&SUBSYS_05431849&REV_A2\3&267A616A&0&0B: Coprocessor
PCI\VEN_10DE&DEV_0547&SUBSYS_05471849&REV_A2\3&267A616A&0&00: PCI Memory
PCI\VEN_10DE&DEV_0548&SUBSYS_00000000&REV_A2\3&267A616A&0&08: PCI to ISA Bridge
PCI\VEN_10DE&DEV_054C&SUBSYS_054C1849&REV_A2\3&267A616A&0&50: Ethernet Controller
PCI\VEN_10DE&DEV_0558&SUBSYS_05581849&REV_A2\3&267A616A&0&48: RAID Controller
PCI\VEN_10DE&DEV_055C&SUBSYS_36621849&REV_A1\3&267A616A&0&38: PCI Device
PCI\VEN_10DE&DEV_0560&SUBSYS_05601849&REV_A1\3&267A616A&0&30: IDE Controller
PCI\VEN_10DE&DEV_0561&SUBSYS_00000000&REV_A2\3&267A616A&0&40: PCI to PCI Bridge
PCI\VEN_10DE&DEV_0562&SUBSYS_00000000&REV_A2\3&267A616A&0&58: PCI to PCI Bridge
PCI\VEN_10DE&DEV_0563&SUBSYS_00000000&REV_A2\3&267A616A&0&60: PCI to PCI Bridge
PCI\VEN_10DE&DEV_0563&SUBSYS_00000000&REV_A2\3&267A616A&0&68: PCI to PCI Bridge
PCI\VEN_10DE&DEV_0563&SUBSYS_00000000&REV_A2\3&267A616A&0&70: PCI to PCI Bridge
PCI\VEN_10DE&DEV_0563&SUBSYS_00000000&REV_A2\3&267A616A&0&78: PCI to PCI Bridge
PCI\VEN_10DE&DEV_0563&SUBSYS_00000000&REV_A2\3&267A616A&0&80: PCI to PCI Bridge
PCI\VEN_10DE&DEV_0563&SUBSYS_00000000&REV_A2\3&267A616A&0&88: PCI to PCI Bridge
22 matching device(s) found.
 
=========== 
USB Devices 
=========== 
No matching devices found.
 
============= 
Input Devices 
============= 
No matching devices found.
 
============ 
ACPI Devices 
============ 
ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_67\_0
ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_67\_1
ACPI\FIXEDBUTTON\2&DABA3FF&0
ACPI\NVRAID20\3&267A616A&0
ACPI\PNP0000\4&3AB42574&0
ACPI\PNP0100\4&3AB42574&0
ACPI\PNP0200\4&3AB42574&0
ACPI\PNP0303\4&3AB42574&0
ACPI\PNP0401\4&3AB42574&0
ACPI\PNP0501\1
ACPI\PNP0700\4&3AB42574&0
ACPI\PNP0800\4&3AB42574&0
ACPI\PNP0A03\0
ACPI\PNP0B00\4&3AB42574&0
ACPI\PNP0C01\1
ACPI\PNP0C02\0
ACPI\PNP0C02\10
ACPI\PNP0C02\11
ACPI\PNP0C02\2E
ACPI\PNP0C04\4&3AB42574&0
ACPI\PNP0C0C\AA
ACPI\PNP0C14\NVIF
ACPI_HAL\PNP0C08\0
ROOT\ACPI_HAL\0000
24 matching device(s) found.
 
============ 
 HDA Audio 
============ 
No matching devices found.
 
============ 
RAID Devices 
============ 
ACPI\NVRAID20\3&267A616A&0
    Hardware ID's:
        ACPI\NVRAID20
        *NVRAID20
PCI\VEN_10DE&DEV_0558&SUBSYS_05581849&REV_A2\3&267A616A&0&48
    Name: RAID Controller
    Hardware ID's:
        PCI\VEN_10DE&DEV_0558&SUBSYS_05581849&REV_A2
        PCI\VEN_10DE&DEV_0558&SUBSYS_05581849
        PCI\VEN_10DE&DEV_0558&CC_010485
        PCI\VEN_10DE&DEV_0558&CC_0104
    Compatible ID's:
        PCI\VEN_10DE&DEV_0558&REV_A2
        PCI\VEN_10DE&DEV_0558
        PCI\VEN_10DE&CC_010485
        PCI\VEN_10DE&CC_0104
        PCI\VEN_10DE
        PCI\CC_010485
        PCI\CC_0104
PCI\VEN_10DE&DEV_0560&SUBSYS_05601849&REV_A1\3&267A616A&0&30
    Name: IDE Controller
    Hardware ID's:
        PCI\VEN_10DE&DEV_0560&SUBSYS_05601849&REV_A1
        PCI\VEN_10DE&DEV_0560&SUBSYS_05601849
        PCI\VEN_10DE&DEV_0560&CC_01018A
        PCI\VEN_10DE&DEV_0560&CC_0101
    Compatible ID's:
        PCI\VEN_10DE&DEV_0560&REV_A1
        PCI\VEN_10DE&DEV_0560
        PCI\VEN_10DE&CC_01018A
        PCI\VEN_10DE&CC_0101
        PCI\VEN_10DE
        PCI\CC_01018A
        PCI\CC_0101
3 matching device(s) found.

I don't know why because your driver pack it's ok it has PCI\VEN_10DE&DEV_0558

I uploaded to dropbox my txtsetup.sif

http://dl.dropbox.com/u/46919572/TXTSETUP.SIF

thanks for your support.

2012-09-23 08:18:33

Hello!!

I have a motherboard that is strange it has Nforce 630A but it's incompatible with currently driver in driverspack masstorage 12.06, this has included Nforce 630 drivers, not 630A.

The id that i need have two drivers is :

SCSI\NVIDIA__Raid_Disk________="nvrd327r"
SCSI\__NVIDIA_______Raid_Disk="nvrd327r"
SCSI\NVIDIA__Raid_Disk_20_____="nvrd327r"
SCSI\__NVIDIA____Raid_Disk_20="nvrd327r"
*NVRAIDBUS="nvrd327r"
*NVRAID20="nvrd327r"

I need one for all the rest of Nforce's with nvrd327r and for my nforce 630A one custom nvrd327rcustom.

How i can do that?

Many thanks!

Search options

Posts found [ 8 ]

1 Reply by alecuba16 2012-10-26 21:22:11

Re: [FEEDBACK-REQ] Nvidia Mass Storage test packs - TESTERS NEEDED (43 replies, posted in DriverPack Mass Storage)

2 Reply by alecuba16 2012-10-26 09:49:18

Re: DP Masstorage 12.09 XP + AMD A55 HUDSON chipset AHCI = BSOD + reset (1 replies, posted in DriverPack Mass Storage)

3 Topic by alecuba16 2012-10-25 22:58:19

Topic: DP Masstorage 12.09 XP + AMD A55 HUDSON chipset AHCI = BSOD + reset (1 replies, posted in DriverPack Mass Storage)

4 Reply by alecuba16 2012-10-22 01:48:40

Re: Multiple drivers (sys files) under one HRWID (7 replies, posted in Feedback and Support - DriverPacks Base)

5 Reply by alecuba16 2012-10-20 00:29:11

Re: Multiple drivers (sys files) under one HRWID (7 replies, posted in Feedback and Support - DriverPacks Base)

6 Reply by alecuba16 2012-10-03 01:14:34

Re: Multiple drivers (sys files) under one HRWID (7 replies, posted in Feedback and Support - DriverPacks Base)

7 Reply by alecuba16 2012-10-02 06:30:46

Re: Multiple drivers (sys files) under one HRWID (7 replies, posted in Feedback and Support - DriverPacks Base)

8 Topic by alecuba16 2012-09-23 08:18:33

Topic: Multiple drivers (sys files) under one HRWID (7 replies, posted in Feedback and Support - DriverPacks Base)

Posts found [ 8 ]