Sorry, I've just noticed my previous msg was not sent. Anyway, it worked!
I've only just foundn slow the runonce part of the installation, but I guess it's not driverpacks related. Good job.
1 2011-04-15 02:40:21
Re: [SLVD] persistent BSoD since 10.06 to 11.01 (13 replies, posted in DriverPack Mass Storage)
2 2011-03-29 06:05:45
Re: [SLVD] persistent BSoD since 10.06 to 11.01 (13 replies, posted in DriverPack Mass Storage)
Hey, guys, FINALLY FIGURED OUT!
Enterily fault of my trust in nLite. I used to make nlite create the bootable .iso from my unattended xp folder.
I had some doubts and I tried to create the .iso myself with mkisofs cmd-line (and an el torito image of the vanilla .iso) -> All Working Fine.
D:\prg\nLite-1.4.9.1>mkisofs -b image1.bin -no-emul-boot -boot-load-seg 1984 -boot-load-size 4 -iso-level 2 -J -l -D -N -joliet-long -relaxed-filenames -o "D:\a.iso" D:\AF\01eI am wondering: I was the only one having this problem with nLite (latest version)? Anyway, fixed.
Now, how can I ever be forgiven? I've integrated the beta massstorage pack you gave me. So, I can contribute to the feedback. Tell me how.
3 2011-03-28 08:39:17
Re: [SLVD] persistent BSoD since 10.06 to 11.01 (13 replies, posted in DriverPack Mass Storage)
I know. But... I had used the same XP installation cd (with further improvements) for years until now. It worked until massstorage 9.01. And still the installation goes fine if not involving sata drivers.
I've tried another original XP disc. Same problem two disks. So, maybe the problem is related to other software used: nLite.
I get the same problems with natural installs (no hotfixes, addons or removal; just service packs).
What shall I fix now? I've tried everything.
Anyway, I've tried the beta v11.03b1
Both on the natural install (no hotfixes, addons or removal; just service packs) and the unattended one, it say it cannot find nvatabus2.sys
4 2011-03-28 06:55:54
Re: [SLVD] persistent BSoD since 10.06 to 11.01 (13 replies, posted in DriverPack Mass Storage)
I've tested my .iso on real hardware. It does not work but not in the same way as in virtualbox.
It can't even get to "partition selection screen" and, while loading drivers, it says there's an error in setup.c showing a strange path "D:\xpsp\base...".
((need some screenshots?))
Okay. I'm wondering if it is completely my fault, but I've done the unattending/driverpacking process SeveraL time and using two different original XP disks.
I'm a bit dazed.
I am gonna test the beta right now.
5 2011-03-27 04:29:07
Topic: [SLVD] persistent BSoD since 10.06 to 11.01 (13 replies, posted in DriverPack Mass Storage)
I'm creating my own unattended version of win xp pro.
I get a blue screen of death (BSoD) with code 0x0004.
The problems comes out just after the first reboot and the unpacking of 7z driverpacks archive, just before the screen in which it uses to install the "true addons".
1) I've tested all the stages until the driverpacks integration and they all work fine.
2) I'm using VirtualBox for testing. Never tried on hardware.
3) The installation has no problem if it goes on an IDE system instead of SATA. So, The error is linked to the mass storage. I'm using 11.01; same problem with the previous version.
4) I've the same blue screen also with a clean install (no true addons or removal of components; only regular hotfixes).
I've had problems also with 10.06 in http://forum.driverpacks.net/viewtopic.php?id=4650.
I'm wondering if someone could help. I would like to use newer mass driver one of these days.
ini
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "C:\Users\Capis\Desktop\AF\02b"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "yes"
DP_Graphics_B = "yes"
DP_Graphics_C = "yes"
DP_LAN = "yes"
DP_MassStorage = "yes"
DP_Sound_A = "yes"
DP_Sound_B = "yes"
DP_WLAN = "yes"
DPs_3rd_party = "no"
DP_MassStorage_textmode = "yes"
; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl = "CCP"
Nvidia_cpl = "3"log
2011-03-26 13:45:17 : <INIT> DriverPacks BASE 10.06 initialized.
2011-03-26 13:45:17 : <INIT> Host environment: WIN_7 Service Pack 1 X86 on a X64 CPU.
2011-03-26 13:45:17 : <INIT> Old temporary working directory deleted.
2011-03-26 13:45:17 : <INIT> Created temporary working directory.
2011-03-26 13:45:17 : <INIT> Imported proxy settings from Internet Explorer.
2011-03-26 13:45:17 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-03-26 13:45:17 : <INIT> Detected DriverPack Chipset 1101!
2011-03-26 13:45:17 : <INIT> Detected DriverPack CPU 1005!
2011-03-26 13:45:17 : <INIT> Detected DriverPack Graphics A 1011!
2011-03-26 13:45:17 : <INIT> Detected DriverPack Graphics B 10111!
2011-03-26 13:45:17 : <INIT> Detected DriverPack Graphics C 1011!
2011-03-26 13:45:17 : <INIT> Detected DriverPack LAN 1101!
2011-03-26 13:45:17 : <INIT> Detected DriverPack Mass Storage 1011!
2011-03-26 13:45:17 : <INIT> Detected DriverPack Mass Storage 1101!
2011-03-26 13:45:17 : <INIT> Detected DriverPack Sound A 1009!
2011-03-26 13:45:17 : <INIT> Detected DriverPack Sound B 1009!
2011-03-26 13:45:17 : <INIT> Detected DriverPack WLAN 1101!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack Bluetooth 910!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack Graphics Languages 10111!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack Graphics PhysX 1011!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack HID 1101!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack LAN-RIS 1011!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack Misc 1011!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack Modem 1101!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack Monitor 1005!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack Runtimes 1011!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack TV 1005!
2011-03-26 13:45:17 : <INIT> Detected 3rd Party DriverPack WebCam 1101!
2011-03-26 13:45:17 : <INIT> Finished scanning.
2011-03-26 13:45:17 : <INIT> Detected settings file "M:\Unattend\DriverPacks\DPs_BASE.ini".
2011-03-26 13:45:17 : <INIT> Windows XP Professional - SP3 detected.
2011-03-26 13:45:17 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2011-03-26 13:45:17 : <INIT> Imported settings from settings file.
2011-03-26 13:45:17 : <GUI> Initialized GUI.
2011-03-26 13:45:17 : <GUI> Created a list of all available language files.
2011-03-26 13:45:17 : <GUI> Set the last used language, English, as the GUI language.
2011-03-26 13:45:20 : <SLIP> Copied DriverPack Graphics B to \OEM.
2011-03-26 13:45:27 : <SLIP> Copied DriverPack Graphics C to \OEM.
2011-03-26 13:45:27 : <SLIP> Copied DriverPack LAN to \OEM.
2011-03-26 13:45:28 : <SLIP> Copied DriverPack Mass Storage to \OEM.
2011-03-26 13:45:37 : <SLIP> Copied DriverPack Sound A to \OEM.
2011-03-26 13:45:44 : <SLIP> Copied DriverPack Sound B to \OEM.
2011-03-26 13:45:46 : <SLIP> Copied DriverPack WLAN to \OEM.
2011-03-26 13:45:46 : <SLIP> Copied DriverPacks to \OEM.
2011-03-26 13:45:46 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2011-03-26 13:45:47 : <SLIP> Updated \I386\winnt.sif to support method 2.
2011-03-26 13:45:47 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2011-03-26 13:45:47 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2011-03-26 13:45:48 : <SLIP> DP_Install_Tool was copied successfully
2011-03-26 13:45:48 : <SLIP> Slipstream finished in 2 minutes and 21 seconds.
2011-03-26 13:45:50 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "C:\Users\Capis\Desktop\AF\02b"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "yes"
DP_Graphics_B = "yes"
DP_Graphics_C = "yes"
DP_LAN = "yes"
DP_MassStorage = "yes"
DP_Sound_A = "yes"
DP_Sound_B = "yes"
DP_WLAN = "yes"
DPs_3rd_party = "no"
DP_MassStorage_textmode = "yes"
; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl = "CCP"
Nvidia_cpl = "3"
2011-03-26 13:45:51 : <CLNP> Create a DPs_Base.log backup @ M:\Unattend\DriverPacks\LogFiles\DPs_BASE_11-03-26_13-45.log
2011-03-26 13:45:51 : <CLNP> Program terminated.
2011-03-26 13:45:53 : <GUI> Closed GUI.
2011-03-26 13:45:53 : <GUI> Saved settings!
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "C:\Users\Capis\Desktop\AF\02b"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "yes"
DP_Graphics_B = "yes"
DP_Graphics_C = "yes"
DP_LAN = "yes"
DP_MassStorage = "yes"
DP_Sound_A = "yes"
DP_Sound_B = "yes"
DP_WLAN = "yes"
DPs_3rd_party = "no"
DP_MassStorage_textmode = "yes"
; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl = "CCP"
Nvidia_cpl = "3"
2011-03-26 13:45:53 : <GUI> Create a DPs_Base.log backup @ M:\Unattend\DriverPacks\LogFiles\DPs_BASE_11-03-26_13-45-53.log
2011-03-26 13:45:53 : <GUI> Program terminated.6 2010-07-01 22:40:41
Re: BSOD in VirtualBox due to mass storage pack 10.06 (10 replies, posted in DriverPack Mass Storage)
Well, I've tried a plethora of things, but no success...
Old thread solution: no changes (predictable);
Various nlited xp installation: no changes;
XP installation sp3: no changes;
XP installation sp2: no changes.
I'm using the lastest virtualbox from oracle, controller sata for the disk, controller ide for the installation cd and I can't say nothing else except 'back to the mass-storage 9.01" and hope the best for the 10.06.1
This is the BSoD code: "STOP: 0x000000F4 (0x00000003, 0x81592CA8, 0x81592E1C, 0x805FB02E)"
If I reboot the virtualbox systema and I restart the installation process, comes out a simple blue screen: "STOP: c000021a Unknown Hard Error"
7 2010-06-29 03:35:42
Re: BSOD in VirtualBox due to mass storage pack 10.06 (10 replies, posted in DriverPack Mass Storage)
Found this old thread (2007): Virtual Box SATA controllerz
I hope this can help... I will try tomorrow if the old solution matches with my problem...
8 2010-06-25 00:44:31
Re: BSOD in VirtualBox due to mass storage pack 10.06 (10 replies, posted in DriverPack Mass Storage)
As I am testing my xp release with virtualbox, this is the HWIDs made inside virtualbox. I obviously did this on the system installed using the older 9.01 mass-storage pack, that works without any problem.
My virtualbox configuration is: one Sata controller with the hard disk and one Ide controller for the cd-dvd drive.
===========
PCI Devices
===========
PCI\VEN_1022&DEV_2000&SUBSYS_20001022&REV_40\3&267A616A&0&18: Scheda Ethernet PCI AMD PCNET Family
PCI\VEN_106B&DEV_003F&SUBSYS_00000000&REV_00\3&267A616A&0&30: Controller host USB OpenHCD Standard
PCI\VEN_8086&DEV_1237&SUBSYS_00000000&REV_02\3&267A616A&0&00: Adattatore Intel 82441FX da processore Pentium(R) Pro a PCI
PCI\VEN_8086&DEV_2415&SUBSYS_00008086&REV_01\3&267A616A&0&28: Controller audio Intel(r) 82801AA AC'97
PCI\VEN_8086&DEV_265C&SUBSYS_00000000&REV_00\3&267A616A&0&58: Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
PCI\VEN_8086&DEV_2829&SUBSYS_00000000&REV_02\3&267A616A&0&68: Intel(R) ICH8M SATA AHCI Controller - 2829
PCI\VEN_8086&DEV_7000&SUBSYS_00000000&REV_00\3&267A616A&0&08: Adattatore Intel 82371SB da PCI a ISA
PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\3&267A616A&0&09: Controller IDE Intel(R) 82371AB/EB PCI Bus Master
PCI\VEN_80EE&DEV_BEEF&SUBSYS_00000000&REV_00\3&267A616A&0&10: VirtualBox Graphics Adapter
PCI\VEN_80EE&DEV_CAFE&SUBSYS_00000000&REV_00\3&267A616A&0&20: VirtualBox Device
10 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&24D6EB65&0 : Hub principale USB
USB\ROOT_HUB20\4&6A987E4&0 : Hub principale USB
2 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\ACPI0003\0 : Scheda AC Microsoft
ACPI\FIXEDBUTTON\2&DABA3FF&0 : Pulsante caratteristica ACPI fissa
ACPI\PNP0000\4&1D401FB5&0 : Controller di interrupt programmabile (PIC)
ACPI\PNP0100\4&1D401FB5&0 : Timer di sistema
ACPI\PNP0200\4&1D401FB5&0 : Controller di accesso diretto alla memoria (DMA)
ACPI\PNP0303\4&1D401FB5&0 : Tastiera standard 101/102 tasti o Tastiera Microsoft Natural PS/2
ACPI\PNP0400\4&1D401FB5&0 : Porta stampante (LPT1)
ACPI\PNP0A03\0 : Bus PCI
ACPI\PNP0F03\4&1D401FB5&0 : Mouse Microsoft PS/2
ACPI_HAL\PNP0C08\0 : Sistema compatibile ACPI Microsoft
ROOT\ACPI_HAL\0000 : PC ad interfaccia di alimentazione e configurazione avanzata (ACPI)
11 matching device(s) found.
============
HDA Audio
============
No matching devices found.
============
RAID Devices
============
PCI\VEN_8086&DEV_2829&SUBSYS_00000000&REV_02\3&267A616A&0&68
Name: Intel(R) ICH8M SATA AHCI Controller - 2829
Hardware ID's:
PCI\VEN_8086&DEV_2829&SUBSYS_00000000&REV_02
PCI\VEN_8086&DEV_2829&SUBSYS_00000000
PCI\VEN_8086&DEV_2829&REV_02
PCI\VEN_8086&DEV_2829
PCI\VEN_8086&DEV_2829&CC_010601
PCI\VEN_8086&DEV_2829&CC_0106
Compatible ID's:
PCI\VEN_8086&CC_010601
PCI\VEN_8086&CC_0106
PCI\VEN_8086
PCI\CC_010601
PCI\CC_0106
PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\3&267A616A&0&09
Name: Controller IDE Intel(R) 82371AB/EB PCI Bus Master
Hardware ID's:
PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01
PCI\VEN_8086&DEV_7111&SUBSYS_00000000
PCI\VEN_8086&DEV_7111&REV_01
PCI\VEN_8086&DEV_7111
PCI\VEN_8086&DEV_7111&CC_01018A
PCI\VEN_8086&DEV_7111&CC_0101
Compatible ID's:
PCI\VEN_8086&CC_01018A
PCI\VEN_8086&CC_0101
PCI\VEN_8086
PCI\CC_01018A
PCI\CC_0101
2 matching device(s) found.9 2010-06-23 23:58:25
Re: BSOD in VirtualBox due to mass storage pack 10.06 (10 replies, posted in DriverPack Mass Storage)
Well, I apologize, but I read just the smart way and didn't found/read these indications...
Anyway, I think it's a similar problem to this thread: Blue Screen with MassStorage v10.06 on Intel ICH8M Chip, so I will wait for the 10.06.1 you're working on.
Thank you for all the great job you're doing!
DPs_BASE.ini
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "N:\Unattending\OS\HRnew\F07b_drp1006"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_MassStorage = "yes"
DP_MassStorage_textmode = "yes"The log file:
2010-06-23 14:23:39 : <INIT> DriverPacks BASE 10.06 initialized.
2010-06-23 14:23:39 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2010-06-23 14:23:39 : <INIT> Created temporary working directory.
2010-06-23 14:23:39 : <INIT> Imported proxy settings from Internet Explorer.
2010-06-23 14:23:39 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-06-23 14:23:39 : <INIT> Detected DriverPack Chipset 10051!
2010-06-23 14:23:39 : <INIT> Detected DriverPack Chipset 10052!
2010-06-23 14:23:39 : <INIT> Detected DriverPack CPU 1005!
2010-06-23 14:23:39 : <INIT> Detected DriverPack CPU 912!
2010-06-23 14:23:39 : <INIT> Detected DriverPack Mass Storage 1006!
2010-06-23 14:23:39 : <INIT> Detected DriverPack Mass Storage 901!
2010-06-23 14:23:39 : <INIT> Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-06-23 14:23:39 : <INIT> Finished scanning.
2010-06-23 14:23:39 : <INIT> Detected settings file "N:\Unattending\Strum\DriverPacker\DPs_BASE.ini".
2010-06-23 14:23:39 : <INIT> Windows XP Professional - OEM SP3 detected.
2010-06-23 14:23:39 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2010-06-23 14:23:39 : <INIT> Imported settings from settings file.
2010-06-23 14:23:39 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2010-06-23 14:23:39 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2010-06-23 14:23:39 : <GUI> Initialized GUI.
2010-06-23 14:23:39 : <GUI> Created a list of all available language files.
2010-06-23 14:23:39 : <GUI> Set the last used language, English, as the GUI language.
2010-06-23 14:23:48 : <GUI> Changed Windows installation files OR export (depending on the installation platform) location to N:\Unattending\OS\HRnew\F07.
2010-06-23 14:23:48 : <GUI> Windows XP Professional - OEM SP3 detected.
2010-06-23 14:23:48 : <GUI> wnt5_x86-32_disc is the selected installation platform .
2010-06-23 14:23:52 : <GUI> Refreshed UpdateChecker with success.
2010-06-23 14:24:17 : <GUI> Saved settings!
2010-06-23 14:24:17 : <GUI> Closed GUI.
2010-06-23 14:24:17 : <SEL> Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-06-23 14:24:18 : <PREP> Removed all attributes from \I386.
2010-06-23 14:24:18 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2010-06-23 14:24:24 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2010-06-23 14:24:24 : <SLIP> N:\Unattending\Strum\DriverPacker\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2010-06-23 14:24:25 : <SLIP> Processing Mass Storage files now. This may take a minute.
2010-06-23 14:24:43 : <SLIP> Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2010-06-23 14:24:44 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2010-06-23 14:24:44 : <SLIP> txtsetup.sif Backed-up Successfully
2010-06-23 14:24:44 : <SLIP> dosnet.inf Backed-up Successfully
2010-06-23 14:24:48 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2010-06-23 14:24:50 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2010-06-23 14:25:18 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2010-06-23 14:25:18 : <SLIP> Created necessary directory structure for method 2.
2010-06-23 14:25:18 : <SLIP> Copying files necessary for method 2.
2010-06-23 14:25:18 : <SLIP> Extracted additional files necessary for method 2.
2010-06-23 14:25:18 : <SLIP> expanded setup.ex_ to setuporg.exe
2010-06-23 14:25:18 : <SLIP> SETUP.EX_ Backed-up Successfully
2010-06-23 14:25:18 : <SLIP> Compressed setup.exe to SETUP.EX_.
2010-06-23 14:25:18 : <SLIP> Method 2 setup.ex_ installed
2010-06-23 14:25:18 : <SLIP> Created \I386\presetup.cmd file.
2010-06-23 14:25:18 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2010-06-23 14:25:18 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2010-06-23 14:25:18 : <SLIP> Copied DriverPack Mass Storage to \OEM.
2010-06-23 14:25:18 : <SLIP> Copied DriverPacks to \OEM.
2010-06-23 14:25:18 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2010-06-23 14:25:18 : <SLIP> Will not slipstream KB888111 because no Sound DriverPack is being slipstreamed
2010-06-23 14:25:18 : <SLIP> Will not slipstream KB883667 because no Graphics DriverPack is being slipstreamed
2010-06-23 14:25:18 : <SLIP> WINNT.SIF Backed-up Successfully
2010-06-23 14:25:19 : <SLIP> Updated \I386\winnt.sif to support method 2.
2010-06-23 14:25:19 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2010-06-23 14:25:19 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2010-06-23 14:25:19 : <SLIP> DP_Install_Tool was copied successfully
2010-06-23 14:25:19 : <SLIP> Slipstream finished in 1 minutes and 2 seconds.
2010-06-23 14:25:39 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "N:\Unattending\OS\HRnew\F07"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "no"
DP_CPU = "no"
DP_MassStorage = "yes"
DP_MassStorage_textmode = "yes"
2010-06-23 14:25:39 : <CLNP> Create a DPs_Base.log backup @ N:\Unattending\Strum\DriverPacker\LogFiles\DPs_BASE_10-06-23_14-25.log
2010-06-23 14:25:39 : <CLNP> Program terminated.10 2010-06-22 19:01:59
Topic: BSOD in VirtualBox due to mass storage pack 10.06 (10 replies, posted in DriverPack Mass Storage)
The new mass storage pack (10.06 with the text-mode) makes my xp x86 installation process crash with a blue-screen-of-death.
The weird aspect is that the process doesn't crash when searching for the drivers (I mean, just before choosing the installation partition). It crashes after the first reboot - just after searching for peripheral devices - before the T13 silent installations sequence.
The same problem does not occur with the mass storage pack 9.01.
I'm testing all this on a VirtualBox system and the problem comes out just on a SATA configuration. It never occurs if I try to install on a IDE configuration.
DriverPacks BASE 10.06
DP_MassStorage_wnt5_x86-32_1006.7z
DriverPacks Method 2
DriverPacks Finisher Method: GUI Run Once
Installation Platform: "a disc"
Destination OS Platform: wnt5_86-32.
I've checked the MD5 checksum, downloaded two times the pack and all was successfully.
Should I post the bsod?