Windows XP Setup Characters Incorrect

"i confirm that the driverpack DP_MassStorage_wnt5_x86-32_1412115.7z it causing the problem after integrating the older driverpack DP_MassStorage_wnt5_x86-32_1411031.7z"

Delete the HWID's listed in the DP_MassStorage_wnt5_x86-32_1412115.7z section [AM-7] as follows:

,PCI\VEN_1002&DEV_4391,PCI\VEN_1002&DEV_4392,PCI\VEN_1002&DEV_4393

Set "ms_count=1" for that section, then delete the following:

ms_2_deviceName="AMD AHCI Compatible RAID SB7xx"
ms_2_tag="ahcix70r"
ms_2_sysFile="ahcix86.sys"
ms_2_hwids="SCSI\ProcessorAMD_____"
ms_2_isBusExtender=false
ms_2_exc_skipIfOS="w2k"

As Outbreaker previously noted, SCSI\ProcessorAMD_____ should be using a null-driver, as noted in the corresponding .Inf file.

edit:  Also modify the MassStorage.ini to reflect when it was edited.  For instance:

; version 1412291

Since you are experiencing STOP &H7B errata about T36, edit the ..\D\M\AM\7\ahcix86.inf file.
  Comment-out the following lines, like so:

;CatalogFile=ahcix86.cat

...

;%NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4392
;%NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4391
;%NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4393

Note that those aforementioned sections are almost verbatim that of the official release.
  This is not to "blame" them that worked on this pack previously,
but to celebrate them and the fact that it took well over two years to uncover problems!

I hope it works for you, because then it should work for everyone else too. 

Oops, i think you might have accidentally reported yourself. 
  We are all human, and make mistakes from time-to-time.

Delete the HWID's listed in the DP_MassStorage_wnt5_x86-32_1412115.7z section [AM-7] as follows:

,PCI\VEN_1002&DEV_4391,PCI\VEN_1002&DEV_4392,PCI\VEN_1002&DEV_4393

Set "ms_count=1" for that section, then delete the following:

ms_2_deviceName="AMD AHCI Compatible RAID SB7xx"
ms_2_tag="ahcix70r"
ms_2_sysFile="ahcix86.sys"
ms_2_hwids="SCSI\ProcessorAMD_____"
ms_2_isBusExtender=false
ms_2_exc_skipIfOS="w2k"

As Outbreaker previously noted, SCSI\ProcessorAMD_____ should be using a null-driver, as noted in the corresponding .Inf file.

edit:  Also modify the MassStorage.ini to reflect when it was edited.  For instance:

; version 1412291

Since you are experiencing STOP &H7B errata about T36, edit the ..\D\M\AM\7\ahcix86.inf file.
  Comment-out the following lines, like so:

;CatalogFile=ahcix86.cat

...

;%NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4392
;%NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4391
;%NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4393

Note that those aforementioned sections are almost verbatim that of the official release.
  This is not to "blame" them that worked on this pack previously,
but to celebrate them and the fact that it took well over two years to uncover problems!

Please post your resulting pack, and test it with an unmodified XP-SP3 media (no updates, no apps, etc) integration using DPs_BASE with DP_MassStorage, DP_LAN & DP_Chipset only.  Please retain your DPs_BASE log, and post it in code tags if there are still problems.  Also, keep a copy for yourself of DPs_FnShR.log from the machine being tested (only if it actually achieves the Desktop sucessfully).

Check RAID by setting up a single drive, if only one drive is available, as JBOD if possible.

If it does work correctly, keep the image for later testing.  Then move on to creating your "final" image with updates, etc.  DPs_BASE integration is to be the last step.  Note that DPs_BASE is not meant to attempt to update integration of DP_MassStorage, as we had previously discussed.

I hope it works for you, because then it should work for everyone else too. 

Also, through this process you may become aware of what exactly caused you characters to not be Greek.
For "Press any key to start from CD" to appear in another language, i so far fail to understand how DriverPacks(TM) could possibly cause that.

Also, I thank you for your continued contributions.  I look forward to learning more from you!

  "Efharisto"  - http://www.cretetravel.com/travel_tips/ … -in-greek/