Topic: SOLVED: CLI.exe error
after my installation yesterday i have got this:
cli.exe
the application failed initialzie properly (0xc0000135), click on ok to terminate the application
this is ok because i dont slipstream the netframework. after installing this it worked fine 
the second is why these files are in my c:\ folder:
DPS_fnsh
DPs_fnsh
and the third is that windows takes the microsoft driver for my promise controller and thats not good. the right one is older but can see hdds greater than 120 gb. ms driver dont do this 
i need this one (1_Ultra 133_100 tx2 driver_b42). here my hardware:
===========
PCI devices
===========
PCI\VEN_1002&DEV_4150&SUBSYS_2070148C&REV_00\4&38B71F77&0&0008: RADEON 9600 SERIES
PCI\VEN_1002&DEV_4170&SUBSYS_2071148C&REV_00\4&38B71F77&0&0108: RADEON 9600 SERIES - Secondary
PCI\VEN_105A&DEV_4D68&SUBSYS_4D68105A&REV_02\4&2E98101C&0&50F0: Promise Technology Inc. Ultra IDE Controller
PCI\VEN_10EC&DEV_8139&SUBSYS_80261043&REV_10\4&2E98101C&0&28F0: Realtek RTL8139/810x Family Fast Ethernet NIC
PCI\VEN_1102&DEV_0004&SUBSYS_20021102&REV_04\4&2E98101C&0&48F0: Creative SB Audigy 2 ZS (WDM)
PCI\VEN_1102&DEV_4001&SUBSYS_00101102&REV_04\4&2E98101C&0&4AF0: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_1102&DEV_7003&SUBSYS_00401102&REV_04\4&2E98101C&0&49F0: Creative Game Port
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_C2\3&267A616A&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_24D0&SUBSYS_00000000&REV_02\3&267A616A&0&F8: Intel(R) 82801EB LPC Interface Controller - 24D0
PCI\VEN_8086&DEV_24D2&SUBSYS_80A61043&REV_02\3&267A616A&0&E8: Intel(R) 82801EB USB Universal Host Controller - 24D2
PCI\VEN_8086&DEV_24D4&SUBSYS_80A61043&REV_02\3&267A616A&0&E9: Intel(R) 82801EB USB Universal Host Controller - 24D4
PCI\VEN_8086&DEV_24D7&SUBSYS_80A61043&REV_02\3&267A616A&0&EA: Intel(R) 82801EB USB Universal Host Controller - 24D7
PCI\VEN_8086&DEV_24DB&SUBSYS_80A61043&REV_02\3&267A616A&0&F9: Intel(R) 82801EB Ultra ATA Storage Controllers
PCI\VEN_8086&DEV_24DD&SUBSYS_80A61043&REV_02\3&267A616A&0&EF: Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
PCI\VEN_8086&DEV_24DE&SUBSYS_80A61043&REV_02\3&267A616A&0&EB: Intel(R) 82801EB USB Universal Host Controller - 24DE
PCI\VEN_8086&DEV_2570&SUBSYS_00000000&REV_02\3&267A616A&0&00: Intel(R) 82865G/PE/P/GV/82848P Processor to I/O Controller - 2570
PCI\VEN_8086&DEV_2571&SUBSYS_00000000&REV_02\3&267A616A&0&08: Intel(R) 82865G/PE/P/GV/82848P Processor to AGP Controller - 2571
17 matching device(s) found.
===========
USB devices
===========
USB\ROOT_HUB\4&1C4B7D9B&0 : USB Root Hub
USB\ROOT_HUB\4&1FCB28C&0 : USB Root Hub
USB\ROOT_HUB\4&24D2BE59&0 : USB Root Hub
USB\ROOT_HUB\4&CB41D3B&0 : USB Root Hub
USB\ROOT_HUB20\4&F180E13&0 : USB Root Hub
USB\VID_0403&PID_FC82\02000K2U : SEMC DSS SyncStation
USB\VID_057C&PID_3702\5&3AD090D&0&2 : AVM FRITZ!Boxand here my settings:
[General]
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/multibootDisc/multibootPlatform
type = "disc"
; trailing backslash is allowed, but not necessary
location = "C:\xp"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finishMethod = "GUIRunOnce"
[OptionalSettings]
; none/all/select/specify/pattern, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "none"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "no"Last edited by Bâshrat the Sneaky (2006-06-03 02:47:52)
