Topic: release 608.1 and KB888111 (that one again)

Hi
I was surprised to see some command windows open and not shut in third stage of setup.
One stayed on top of Finisher 'last build' until I closed it, and finisher proceeded...

8-) 'last build' , I sure hope NOT...
I would suggest to change that in the version number wink

looked at HWmangler as I hear nothing from speakers, and realtek 0882 HDaudio is not installed
PCI device with yellow exclamation.

I look at svcpack.inf, and it is once again corrupted.

then I run KB888111 update myself, and this immediately triggers the audio hardware found.
(two cmd windows with RunDll32 with prompt in system32 folder pop up... I never seen such actions before)
I close them, and the tray soon says the hardware can be used..

it must be frustrating to not find the cause of this 888111 failure / svcpack.inf corruption
the UNPACKED svcpack,in_ on DVD has that corrupt txt in it, so it not during extraction...

wanted to test with soundpack 6.061, but will do one without sound to see the difference..

if that 888111 corruption is because of the soundpack, then I better wait for soundpack 1 update...

The answer was 42?
Kind regards, Jaak.

Re: release 608.1 and KB888111 (that one again)

I'm working together with someone to create a reliable unicode to ascii conversion tool. Currently the conversion is done through the 'cmd.exe /c type' command. This seemed to be sufficient, but I've found after testing that it failed to convert files encoded in UCS-2 Little Endian to ascii. I know you have reported this prevoiusly, but I can't do much about it at the moment.

It would be helpful if you could post the exact edition (Pro/Home, Corporate/Retail etc), so we can isolate the cases in which this problem will occur.

Founder of DriverPacks.net — wimleers.com

Re: release 608.1 and KB888111 (that one again)

it was a XP pro sp2 corporate

here is the finisher log that one.

2006-08-12 20:23:21 : <INIT> DriverPacks Finisher lastBuild initialized.
2006-08-12 20:23:21 : <INIT> Detected platform wnt5_x86-32.
2006-08-12 20:23:21 : <INIT> Start logging of the HWIDs for relevant devices present in this system.
2006-08-12 20:23:21 : <INIT> 1. ACPI devices

ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI-vaste-functieknop
ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_6\_0                : Intel(R) Pentium(R) D CPU 3.00GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_6\_1                : Intel(R) Pentium(R) D CPU 3.00GHz
ACPI\INT0800\2&DABA3FF&0                                    : Intel(R) 82802 Firmware Hub Device
ACPI\PNP0000\4&2D88FB92&0                                   : Programmeerbare interruptcontroller
ACPI\PNP0100\4&2D88FB92&0                                   : Systeemtimer
ACPI\PNP0200\4&2D88FB92&0                                   : Controller voor directe geheugentoegang
ACPI\PNP0303\4&2D88FB92&0                                   : Standaardtoetsenbord (101/102 toetsen) of Microsoft Natural PS/2-toetsenbord
ACPI\PNP0401\4&2D88FB92&0                                   : ECP-printerpoort (LPT1)
ACPI\PNP0501\1                                              : Communicatiepoort (COM1)
ACPI\PNP0501\2                                              : Communicatiepoort (COM2)
ACPI\PNP0700\4&2D88FB92&0                                   : Standaarddiskettestationcontroller
ACPI\PNP0800\4&2D88FB92&0                                   : Systeemluidspreker
ACPI\PNP0A03\1                                              : PCI-bus
ACPI\PNP0B00\4&2D88FB92&0                                   : Systeem-CMOS/Real-timeklok
ACPI\PNP0C01\2&DABA3FF&0                                    : Systeemkaart
ACPI\PNP0C02\1                                              : Moederbordbronnen
ACPI\PNP0C02\2                                              : Moederbordbronnen
ACPI\PNP0C02\3&13C0B0C5&0                                   : Moederbordbronnen
ACPI\PNP0C04\4&2D88FB92&0                                   : Numerieke-gegevensprocessor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI-aan/uit-knop
ACPI\PNP0F13\4&2D88FB92&0                                   : PS/2-compatibele muis
ACPI_HAL\PNP0C08\0                                          : Systeem dat voldoet aan Microsoft ACPI
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor-pc
24 matching device(s) found.

2006-08-12 20:23:21 : <INIT> 2. PCI devices

PCI\VEN_104C&DEV_8025&SUBSYS_10001458&REV_01\4&BC67B8D&0&38F0: Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_10DE&DEV_0141&SUBSYS_31241458&REV_A2\4&29DC82A&0&0008: NVIDIA GeForce 6600
PCI\VEN_1283&DEV_8212&SUBSYS_00011283&REV_13\4&BC67B8D&0&30F0: ITE IT8212 ATA RAID Controller
PCI\VEN_14E4&DEV_169D&SUBSYS_E0001458&REV_11\4&3944098&0&00E2: Broadcom NetLink (TM) Gigabit Ethernet
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_E1\3&13C0B0C5&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2770&SUBSYS_00000000&REV_81\3&13C0B0C5&0&00: Intel(R) 945G/GZ/P/PL Processor to I/O Controller - 2770
PCI\VEN_8086&DEV_2771&SUBSYS_00000000&REV_81\3&13C0B0C5&0&08: Intel(R) 945G/GZ/P/PL PCI Express Root Port - 2771
PCI\VEN_8086&DEV_27B8&SUBSYS_00000000&REV_01\3&13C0B0C5&0&F8: Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8
PCI\VEN_8086&DEV_27C8&SUBSYS_50041458&REV_01\3&13C0B0C5&0&E8: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
PCI\VEN_8086&DEV_27C9&SUBSYS_50041458&REV_01\3&13C0B0C5&0&E9: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
PCI\VEN_8086&DEV_27CA&SUBSYS_50041458&REV_01\3&13C0B0C5&0&EA: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
PCI\VEN_8086&DEV_27CB&SUBSYS_50041458&REV_01\3&13C0B0C5&0&EB: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
PCI\VEN_8086&DEV_27CC&SUBSYS_50061458&REV_01\3&13C0B0C5&0&EF: Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01\3&13C0B0C5&0&E0: Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
PCI\VEN_8086&DEV_27D4&SUBSYS_00000000&REV_01\3&13C0B0C5&0&E2: Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D4
PCI\VEN_8086&DEV_27D8&SUBSYS_A1021458&REV_01\3&13C0B0C5&0&D8: PCI Device
PCI\VEN_8086&DEV_27DA&SUBSYS_50011458&REV_01\3&13C0B0C5&0&FB: Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
PCI\VEN_8086&DEV_27DF&SUBSYS_B0011458&REV_01\3&13C0B0C5&0&F9: Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
18 matching device(s) found.

2006-08-12 20:23:21 : <INIT> 3. HDAUDIO devices

No matching devices found.

2006-08-12 20:23:21 : <INIT> 4. USB devices

USB\ROOT_HUB\4&10C3B2A4&0                                   : USB-hoofdhub
USB\ROOT_HUB\4&26FCA6D4&0                                   : USB-hoofdhub
USB\ROOT_HUB\4&37690C5A&0                                   : USB-hoofdhub
USB\ROOT_HUB\4&574D1E&0                                     : USB-hoofdhub
USB\ROOT_HUB20\4&172B99F8&0                                 : USB-hoofdhub
5 matching device(s) found.

2006-08-12 20:23:21 : <INIT> Logging of HWIDs complete.
2006-08-12 20:23:22 : <INIT> Processed settings.
2006-08-12 20:23:22 : <FLTR> Collected the HWIDs for this system.
2006-08-12 20:23:22 : <FLTR> Verifying requirements for exception [wnt5_x86-32__0001__D-G-A-1] (1/9).
2006-08-12 20:23:22 : <FLTR> 	1. tagFiles (ALL tagFiles must be found)
2006-08-12 20:23:22 : <FLTR> 		! Could not find tagfile "C:\ATICCC.ins" (1/1).
2006-08-12 20:23:22 : <FLTR> 	=> This exception will not be applied.
2006-08-12 20:23:22 : <FLTR> Verifying requirements for exception [wnt5_x86-32__0002__D-G-A-1] (2/9).
2006-08-12 20:23:22 : <FLTR> 	1. tagFiles (ALL tagFiles must be found)
2006-08-12 20:23:22 : <FLTR> 		Found tagfile "C:\ATICCP.ins" (1/1).
2006-08-12 20:23:22 : <FLTR> 	4. +infFiles (ANY +infFiles must matched
2006-08-12 20:23:22 : <FLTR> 		Wildcard specified for +infFiles requirement: scan for .inf files.
2006-08-12 20:23:22 : <FLTR> 		Checking .inf file "C:\D\G\A\1\C2_34826.inf".
2006-08-12 20:23:30 : <FLTR> 		Checking .inf file "C:\D\G\A\1\CX_34826.inf".
2006-08-12 20:23:39 : <FLTR> 		Checking .inf file "C:\D\G\A\1\E2_34826.inf".
2006-08-12 20:23:40 : <FLTR> 		Checking .inf file "C:\D\G\A\1\EX_34826.inf".
2006-08-12 20:23:40 : <FLTR> 		Checking .inf file "C:\D\G\A\1\MX_34826.inf".
2006-08-12 20:23:43 : <FLTR> Finished filtering exceptions.
2006-08-12 20:23:50 : <EXEC> Executed all commands (2) for exception [wnt5_x86-32__0002__D-G-A-1].
2006-08-12 20:23:50 : <EXEC> Executed all commands (2) for exception [wnt5_x86-32__0006__D-L-NV-123].
2006-08-12 20:24:39 : <EXEC> Executed all commands (19) for exception [wnt5_x86-32__0007__D-S-CR-1].
2006-08-12 20:24:42 : <EXEC> Executed all commands (19) for exception [wnt5_x86-32__0008__D-S-CR-2].
2006-08-12 20:25:49 : <EXEC> Executed all commands (19) for exception [wnt5_x86-32__0009__D-S-CR-3].
2006-08-12 20:25:57 : <EXEC> Executed all commands (3) for exception [wnt5_x86-32__0011__D-S-N].
2006-08-12 20:25:58 : <EXEC> Executed all commands (1) for exception [wnt5_x86-32__0019__D-S-V-1].
2006-08-12 20:25:59 : <EXEC> Executed all commands (2) for exception [wnt5_x86-32__0020__D-S-V-2].
2006-08-12 20:26:11 : <CLNP> Deleted the DriverPacks, which were located in 'C:\D'.
2006-08-12 20:26:11 : <CLNP> Deleted 'C:\hwids.dat'!
2006-08-12 20:26:11 : <CLNP> Deleted 'C:\DPsFnshr.ini'!
2006-08-12 20:26:11 : <CLNP> Deleted 'C:\devcon.exe'!
2006-08-12 20:26:11 : <CLNP> Deleted 'C:\makePNF.exe'!
2006-08-12 20:26:11 : <CLNP> Deleted 'C:\addUsepmtimer.exe'!
2006-08-12 20:26:11 : <CLNP> Deleted 'C:\ATICCP.ins'!
2006-08-12 20:26:11 : <CLNP> Added new value to the RunOnce key in the registry: the DriverPacks Finisher itself will get deleted after the next reboot.
2006-08-12 20:26:11 : Program terminated.

the svcpack.inf found was 57 bytes, with same content as the older bad ones.

second trial will commence in 15 minutes or so, it is burned to DVD right now.
no soundpack this time

The answer was 42?
Kind regards, Jaak.

Re: release 608.1 and KB888111 (that one again)

That's with 6.08.1???

Founder of DriverPacks.net — wimleers.com

Re: release 608.1 and KB888111 (that one again)

yep... DPSbase 6.08.1

the base INI

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "C:\XPcorpCD"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "none"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_Graphics_A	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_Sound_A	= "yes"
DP_MassStorage_textmode = "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCP"

the base LOG

2006-08-12 17:00:00 : <INIT> DriverPacks BASE 6.08.1 initialized.
2006-08-12 17:00:00 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2006-08-12 17:00:00 : <INIT> Could not find settings file"C:\DriverPacks\DPs_BASE.ini".
2006-08-12 17:00:00 : <INIT> [General]\prefLang not specified: default (English) was set.
2006-08-12 17:00:00 : <INIT> [General]\wizdButtons not specified: default (yes) was set.
2006-08-12 17:00:00 : <INIT> [General]\GUI not specified: default (yes) was set.
2006-08-12 17:00:00 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2006-08-12 17:00:00 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2006-08-12 17:00:00 : <INIT> [OptionalSettings]\KTD not specified: default (none) was set.
2006-08-12 17:00:00 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2006-08-12 17:00:00 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (CCC) was set.
2006-08-12 17:00:00 : <INIT> Detected DriverPack Chipset 6.08!
2006-08-12 17:00:00 : <INIT> Detected DriverPack CPU 6.08!
2006-08-12 17:00:00 : <INIT> Detected DriverPack Graphics A 6.08!
2006-08-12 17:00:00 : <INIT> Detected DriverPack LAN 6.08!
2006-08-12 17:00:00 : <INIT> Detected DriverPack MassStorage 6.08!
2006-08-12 17:00:00 : <INIT> Detected DriverPack Sound A 6.06.1!
2006-08-12 17:00:00 : <INIT> Could not detect any 3rd party DriverPacks.
2006-08-12 17:00:00 : <INIT> DriverPacks scanned sucessfully.
2006-08-12 17:00:00 : <INIT> QuickStream Cache directory not found!
2006-08-12 17:00:00 : <GUI>  Initialized GUI.
2006-08-12 17:00:00 : <GUI>  Created a list of all available language files.
2006-08-12 17:00:00 : <GUI>  Set the last used language, English, as the GUI language.
2006-08-12 17:00:23 : <GUI>  Changed Windows installation files location to C:\XPcorpCD.
2006-08-12 17:00:28 : <GUI>  Refreshed UpdateChecker with success.
2006-08-12 17:00:44 : <GUI>  Closed GUI.
2006-08-12 17:00:44 : <GUI>  Saved settings!
2006-08-12 17:00:44 : Program terminated.

have a nastier surprise...
see next post

The answer was 42?
Kind regards, Jaak.

Re: release 608.1 and KB888111 (that one again)

Hi Wim

did it in a fresh source, from a fresh unpacked base 6801, soundpack not in driverpacks folder.

wham, even when chips and mass storage are in there, hard disks are not seen when I launch the DVD for setup in my testrig..

base_failure_LOG

2006-08-13 00:23:35 : <INIT> DriverPacks BASE 6.08.1 initialized.
2006-08-13 00:23:35 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2006-08-13 00:23:35 : <INIT> Detected settings file "C:\DriverPacks\DPs_BASE.ini".
2006-08-13 00:23:35 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2006-08-13 00:23:35 : <INIT> Imported settings from settings file.
2006-08-13 00:23:35 : <INIT> Detected DriverPack Chipset 6.08!
2006-08-13 00:23:35 : <INIT> Detected DriverPack CPU 6.08!
2006-08-13 00:23:35 : <INIT> Detected DriverPack Graphics A 6.08!
2006-08-13 00:23:35 : <INIT> Detected DriverPack LAN 6.08!
2006-08-13 00:23:35 : <INIT> Detected DriverPack MassStorage 6.08!
2006-08-13 00:23:35 : <INIT> Could not detect any 3rd party DriverPacks.
2006-08-13 00:23:35 : <INIT> DriverPacks scanned sucessfully.
2006-08-13 00:23:35 : <GUI>  Initialized GUI.
2006-08-13 00:23:35 : <GUI>  Created a list of all available language files.
2006-08-13 00:23:35 : <GUI>  Set the last used language, English, as the GUI language.
2006-08-13 00:23:57 : <GUI>  Refreshed UpdateChecker with success.
2006-08-13 00:24:02 : <GUI>  Saved settings!
2006-08-13 00:24:02 : <GUI>  Closed GUI.
2006-08-13 00:24:02 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2006-08-13 00:24:04 : <PREP> Removed all attributes from \I386.
2006-08-13 00:24:04 : <PREP> Deleted old DriverPacks.
2006-08-13 00:24:04 : <PREP> Deleted old method 2 related files.
2006-08-13 00:24:04 : <PREP> Created a backup of \I386\winnt.sif.
2006-08-13 00:24:04 : <PREP> Restored \I386\txtsetup.sif.
2006-08-13 00:24:04 : <PREP> Restored \I386\dosnet.inf.
2006-08-13 00:24:04 : <PREP> Old temporary working directory deleted.
2006-08-13 00:24:04 : <PREP> Created temporary working directory.
2006-08-13 00:24:04 : <SLIP> Extracted necessary files for method 2.
2006-08-13 00:24:04 : <SLIP> Created necessary directory structure for method 2.
2006-08-13 00:24:04 : <SLIP> Copied files necessary for method 2.
2006-08-13 00:24:06 : <SLIP> Copied DriverPacks to \OEM.
2006-08-13 00:24:06 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2006-08-13 00:24:09 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2006-08-13 00:24:18 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2006-08-13 00:24:19 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2006-08-13 00:25:49 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2006-08-13 00:25:49 : <SLIP> Compressed setup.exe to SETUP.EX_.
2006-08-13 00:25:49 : <SLIP> Created \I386\presetup.cmd file.
2006-08-13 00:25:50 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2006-08-13 00:25:50 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2006-08-13 00:25:50 : <SLIP> Updated \I386\winnt.sif to support method 2.
2006-08-13 00:25:50 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2006-08-13 00:25:50 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2006-08-13 00:25:50 : <SLIP> Slipstream finished in 1 minutes and 47 seconds.
2006-08-13 00:25:57 : <CLNP> Temporary working directory successfully deleted.
2006-08-13 00:25:57 : Program terminated.

the base INI for that session

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "C:\XPcorpCD2"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "none"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_Graphics_A	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_MassStorage_textmode = "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCP"

and the surprise...

the resulting TXTSETUP.SIF
does NOT have the mass storage drivers put in it
the txtsetup.org is there, and the txtsetup.sif is exact same date

iteraid is NOT in the txt whatsoever, which is no surprise if it was not altered at all.



will try to reproduce that exactly...

do you want the txtsetup.sif?
(i think it's of no use, since its a non-processed copy of the original..)

The answer was 42?
Kind regards, Jaak.

Re: release 608.1 and KB888111 (that one again)

the following, that was too quick...

2006-08-13 00:25:49 : <SLIP> Created \I386\presetup.cmd file.
2006-08-13 00:25:50 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2006-08-13 00:25:50 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2006-08-13 00:25:50 : <SLIP> Updated \I386\winnt.sif to support method 2.
2006-08-13 00:25:50 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2006-08-13 00:25:50 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2006-08-13 00:25:50 : <SLIP> Slipstream finished in 1 minutes and 47 seconds.

The answer was 42?
Kind regards, Jaak.

Re: release 608.1 and KB888111 (that one again)

in that same build
dosnet.inf was also not altered.
dosnet.org exists
content and date same as original

The answer was 42?
Kind regards, Jaak.

Re: release 608.1 and KB888111 (that one again)

Actually that was NOT too quick. The modifications are very  minimal. Updating txtsetup.sif and dosnet.inf for text mode mass storage drivers does however take sometime.

txsetup.sif and dosnet.inf not being altered.... is virtually impossible. An error would have been triggered! Can you reproduce this?

Founder of DriverPacks.net — wimleers.com

Re: release 608.1 and KB888111 (that one again)

Same thing was here with 6.08 (posted it once, but think it was deleted)

1. HDaudio was still not installed
2. after restarting windows the first time maaaany CMD windows opened and didnt close until i wrote "exit" (then it continues)
3. I got a 7600 Pro 128mb in my Laptop. The Driverpack installed it as a 7700...
4. CCC also did try to install
4. Now i have a creative sounddriver or sth on my system (no, i dont have a creative hdaudio system!), dunno how to remove!


HWID:

=========== 
PCI devices 
=========== 
 
 
PCI\VEN_104C&DEV_8039&SUBSYS_81EF104D&REV_00\4&6B16D5B&0&18F0: Generic CardBus Controller
PCI\VEN_104C&DEV_803A&SUBSYS_81EF104D&REV_00\4&6B16D5B&0&19F0: Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_104C&DEV_803B&SUBSYS_81EF104D&REV_00\4&6B16D5B&0&1AF0: Texas Instruments PCIxx12 Integrated FlashMedia Controller
PCI\VEN_10DE&DEV_0398&SUBSYS_81EF104D&REV_A1\4&31B7BFB9&0&0008: NVIDIA GeForce Go 7700
PCI\VEN_8086&DEV_1092&SUBSYS_81EF104D&REV_02\4&6B16D5B&0&40F0: Intel(R) PRO/100 VE Network Connection
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_E2\3&B1BFB68&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_27A0&SUBSYS_00000000&REV_03\3&B1BFB68&0&00 : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R) 945GT Express Processor to DRAM Controller - 27A0
PCI\VEN_8086&DEV_27A1&SUBSYS_00000000&REV_03\3&B1BFB68&0&08 : Mobile Intel(R) 945GM/PM/GMS/940GML and Intel(R) 945GT Express PCI Express Root Port - 27A1
PCI\VEN_8086&DEV_27B9&SUBSYS_00000000&REV_02\3&B1BFB68&0&F8 : Intel(R) 82801GBM (ICH7-M) LPC Interface Controller - 27B9
PCI\VEN_8086&DEV_27C4&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&FA : Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4
PCI\VEN_8086&DEV_27C8&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&E8 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
PCI\VEN_8086&DEV_27C9&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&E9 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
PCI\VEN_8086&DEV_27CA&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&EA : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
PCI\VEN_8086&DEV_27CB&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&EB : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
PCI\VEN_8086&DEV_27CC&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&EF : Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_02\3&B1BFB68&0&E0 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
PCI\VEN_8086&DEV_27D2&SUBSYS_00000000&REV_02\3&B1BFB68&0&E1 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D2
PCI\VEN_8086&DEV_27D4&SUBSYS_00000000&REV_02\3&B1BFB68&0&E2 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D4
PCI\VEN_8086&DEV_27D6&SUBSYS_00000000&REV_02\3&B1BFB68&0&E3 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D6
PCI\VEN_8086&DEV_27D8&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&D8 : Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_27DA&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&FB : Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
PCI\VEN_8086&DEV_27DF&SUBSYS_81EF104D&REV_02\3&B1BFB68&0&F9 : Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
PCI\VEN_8086&DEV_4222&SUBSYS_10518086&REV_02\4&2803E7C1&0&00E2: Intel(R) PRO/Wireless 3945ABG Network Connection
23 matching device(s) found.
 
 
=========== 
USB devices 
=========== 
 
USB\ROOT_HUB\4&1B05E4FD&0                                   : USB Root Hub
USB\ROOT_HUB\4&209F9437&0                                   : USB Root Hub
USB\ROOT_HUB\4&23B8C14A&0                                   : USB Root Hub
USB\ROOT_HUB\4&296C3174&0                                   : USB Root Hub
USB\ROOT_HUB20\4&1A0DFFDF&0                                 : USB Root Hub
USB\VID_044E&PID_300C\5&1E03F87C&0&1                        : Bluetooth USB Controller (ALPS/UGX UGPZ6XC02A)
USB\VID_0AC8&PID_C002\5&26F8F4DB&0&8                        : Sony Visual Communication Camera VGP-VCC1
7 matching device(s) found.

Last edited by Bâshrat the Sneaky (2006-08-13 22:49:19)

Re: release 608.1 and KB888111 (that one again)

1. The hotfix IS installed, check your HWIDs wink The driver may not have been installed, but I've updated DriverPack Sound A last night so probably that will result in a properly working HDA device.

2, 3, 4: All related to issue #165.

Working on the final fix...

Founder of DriverPacks.net — wimleers.com