• nrv
  • DriverPacks newbie
  • Offline
  • Registered: 2008-02-09
  • Posts: 1

Topic: [BSOD] JMicron JMB36X RAID Controller

Everytime I try integrating the MassStorage DP, Windows pops up a BSOD just before RunOnceEX should begin taking place (first logon). I'm not quite sure what would happen if I check the "MassStorage textmode" checkbox. On the other hand, I can recall I've tried it without any luck. I'm sure there's no problem if I remove the drivers that my PC wouldn't find useful.

Everything works just fine without this pack.

HWID

PCI\VEN_197B&DEV_2363&SUBSYS_B0001458&REV_02\4&24C54F4F&0&00E3: RAID Controller
PCI\VEN_197B&DEV_2363&SUBSYS_B0001458&REV_02\4&24C54F4F&0&01E3: Standard Dual Channel PCI IDE Controller

DriverPack_MassStorage_wnt5_x86-32.ini (up-to-date)

[DriverPack]
platform="wnt5_x86-32"
name="MassStorage"
; version 801 (Jan 19)
classes="hdc,SCSIAdapter"
rootdir="D\M"
driverCount=

[J]
ms_count=1
ms_1_deviceName="JMicron JMB36X RAID Controller"
ms_1_tag="jraid"
ms_1_sysFile="jraid.sys"
ms_1_hwids="PCI\VEN_197B&DEV_2360&CC_0104,PCI\VEN_197B&DEV_2361&CC_0104,PCI\VEN_197B&DEV_2363&CC_0104,PCI\VEN_197B&DEV_2366&CC_0104,PCI\VEN_197B&DEV_2373&CC_0104,PCI\VEN_197B&DEV_2360&CC_0106,PCI\VEN_197B&DEV_2361&CC_0106,PCI\VEN_197B&DEV_2363&CC_0106,PCI\VEN_197B&DEV_2366&CC_0106,PCI\VEN_197B&DEV_2373&CC_0106"
ms_1_isBusExtender=false

DPs_BASE.ini

[General]
prefLang	= "English"
wizardButtons	= "yes"
GUI		= "yes"


[Settings]
instPlatform	= "disc"
location	= "D:\Projects\UACD\USBVR_EN"
DriverPacks	= "select"
DPsMethod	= "2"
finisherMethod	= "RunOnceEx"

[RunOnceExSettings]
startID		= "custom"
customStartID	= "30"

[OptionalSettings]
KTD		= "false"
KTDlocation	= "%SystemRoot%\DriverPacks"
QSC		= "yes"

[SelectDriverPacks]
DP_Chipset	= "yes"
DP_Graphics_A	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_Sound_A	= "yes"
DPs_3rd_party	= "yes"
DP_MassStorage_textmode = "no"

[OptionalSettingsOther]
ATI_cpl		= "CCC"
  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [BSOD] JMicron JMB36X RAID Controller

Hi
this line = DP_MassStorage_textmode = "no"

You selected to NOT use TXTmode.
TXTmode is for hard disk detection and when you get to see/partition/format the HDD without help of DriverPacks mass storage TXTmode, then mass storage pack is not really needed?

On the other hand, a DriverPacks enhanced install disc with DriverPacks Mass storage TXTmode could detect your HDD with the txtmode driver intended for it, and later on, PNP would (in a perfect world) detect that same driver during PnP driver install.
(PnP=plug and play)
Nothing in the world is perfect.

What you did as a first time poster is world class.
You gave us detail, what means you probably searched how to do it.

Start fresh, use a new source copy without previously slipped mass storage, and Turn TXTmode ON, and get back to us. (Mass storage was recently updated, and it is a h*ll of a pack to get things working. It is NOT perfect.)

The answer was 42?
Kind regards, Jaak.