Re: [REL] [x86, 32 bit] DP_Input_wnt5_x86-32_070905
does going back to DP_Input_wnt5_x86-32_070113.7z fix this issue?
Re: [REL] [x86, 32 bit] DP_Input_wnt5_x86-32_070905
V4 driver dont work.....this is the exact same mouse on each pc(Dell rebranded Logitech)
GX745 V3.1.0.0 - works fine
USB\VID_046D&PID_C016\5&18E0A94F&0&2 [corded optical wheel mouse, under HID devices]
USB\VID_413C&PID_2101&MI_00\6&5E51BFE&0&0000 [USB human interface device, under HID devices]
HID\VID_046D&PID_C016\6&1A600EB3&0&0000 [ HID-compliant optical wheeel mouse, under mice and other poitning devices]
GX150 V4 - not work
USB\VID_046D&PID_C016\5&35B73D88&0&2
Re: [REL] [x86, 32 bit] DP_Input_wnt5_x86-32_070905
I believe the reason you are having this issue has to do with how mouse drivers in Windows work. If you are unaware, there can only be one mouse driver loaded at a time.
I used to try to directly integrate Synaptics drivers into my Sysprep'ed Ghost image for the school district I work at because of the laptops we have, but I found it tried to load the Synaptics drivers for everything, including desktop machines using Microsoft, Logitech, etc mice. So I started digging through the INFs and found that the way Synaptics drivers work, they are assuming it is going to be a touchpad on a laptop in which case there is a strong possibility of someone adding another pointer device (i.e. mouse) to the computer via USB. So how do you make it work if only one driver can be loaded at a time? Make your driver include a catch-all. The Synaptics drivers install for everything and has generic support for all USB mice added as well.
So people that are using this DP are getting Synaptics drivers loaded for their non-Synaptics touchpads and mice causing problems. Although it provides generic support, it apparently only works on additional devices added, not on the primary.
So what was my solution for my school district? I'm sort of embarassed to admit this, but to get the drivers to work the best without having to manually load the drivers on every machine, I just made a copy of the image file and included the Synaptics drivers to this image and called it my "laptop" image. So I have about 1.5gb taken up on my server because of touchpad drivers. Yeah, I'm sure I could just set up Ghost to install the drivers by copying the installer and running it with a switch to make it silent... and I probably should. *sigh* But it wasn't the first thing to come to mind.
Last edited by DeTard (2007-09-22 16:30:41)
Re: [REL] [x86, 32 bit] DP_Input_wnt5_x86-32_070905
I have taken the liberty of rolling back the non-working setpoint V4 driver to previous v3.10, now on server
-update-
Now everything works again 
Last edited by chud (2007-09-25 21:20:40)
Re: [REL] [x86, 32 bit] DP_Input_wnt5_x86-32_070905
Just an update... I tried using this on a Dell Inspiron 1100 laptop that has a Synaptics Touchpad, but it got detected as "Microsoft PS/2 Port Mouse (IntelliPoint)".
It's HWID is:
ACPI\PNP0F13\4&2A083901&0
Sadly, it was the sole reason I tried the DP. Go figure.
- Jaak
- Old Timer Rookie
- Offline
Re: [REL] [x86, 32 bit] DP_Input_wnt5_x86-32_070905
hi,
it looks like this one was considered stable?
The sticky was not updated yet, and you are at.
(MD5 Hash: 3522d465acf3559dd527a2d3e5557dd6 DP_Input_wnt5_x86-32_070923.7z)
(I'll prepare a txt for twig123, so he can update that sticky.)
Last edited by Jaak (2007-10-28 15:02:06)
The answer was 42?
Kind regards, Jaak.
Kind regards, Jaak.
Re: [REL] [x86, 32 bit] DP_Input_wnt5_x86-32_070905
Jake/Jaak, do you have any interest in updating this driverpack? If so, would you consider adding the Wacom TabletPC driver for XP?
Thanks in advance!
Last edited by newsposter (2008-06-08 10:31:15)