Topic: Mistake in the driver for the controller Sis 180/181...
The driver was disabled on this package version (DP_MassStorage_wnt5_x86-32_7062)! The controller is not recognized in boot process!
I suggest the following modification in the .INF file:
-----------------
[SI-1]
;This driver was disabled. (ms_count = 0)
ms_count = 1
ms_1_deviceName = "SiS 181 RAID Controller"
ms_1_tag = "sisraid1"
ms_1_sysFile = "sisraid1.sys"
ms_1_hwids = "PCI\VEN_1039&DEV_0181"
ms_1_isBusExtender = false
[SI-2]
;This driver was disabled. (ms_count = 0)
ms_count = 1
ms_1_deviceName = "SiS 180 RAID Controller"
ms_1_tag = "sisraid"
ms_1_sysFile = "sisraid.sys"
ms_1_hwids = "PCI\VEN_1039&DEV_0180"
ms_1_isBusExtender = false
[SI-3]
;This driver is only for SIS 182 RAID Controler!!!!! Update "ms_1_hwids"!!!!
ms_count = 1
ms_1_deviceName = "SiS 182 RAID Controller"
ms_1_tag = "sisraid2"
ms_1_sysFile = "sisraid2.sys"
ms_1_hwids = "PCI\VEN_1039&DEV_0182,PCI\VEN_1039&DEV_1182"
ms_1_isBusExtender = false
[SI-4]
ms_count = 1
ms_1_deviceName = "SiS 1184 RAID/AHCI, 1185 AHCI"
ms_1_tag = "sisraid4"
ms_1_sysFile = "sisraid4.sys"
ms_1_hwids = "PCI\VEN_1039&DEV_1184,PCI\VEN_1039&DEV_1185"
ms_1_isBusExtender = false
-----------------
Now the controller SIS 180 and 181 will be recognized!
(SIS's Drivers 180, 181 and 182 are different)
The package "DP_MassStorage_wnt5_x86-32_7064" had the same problem.
I suggest the same alteration in the .INF file.
Last edited by paulocmarques (2007-06-28 00:49:05)