• Registered: 2007-03-10
  • Posts: 1

Topic: [CLOSED] Silicon Image 3112 BSOD after file copy

i must be missing something. no matter what Silicon Image bios i put into my NF7-S bios, 4250,4279,4283. I get a BSOD after the file copy on the first reboot.   I'm using the most current Abit bios, and most current driverpack etc.

Anyone have a checklist of things i should check?

Last edited by polarys425 (2007-03-13 12:01:55)

  • From: Hasselt, Belgium
  • Registered: 2006-05-26
  • Posts: 2,609

Re: [CLOSED] Silicon Image 3112 BSOD after file copy

Checklist:
- verify that the CD isn't corrupt by doing a test install in VMWare/VirtualPC
- verify that your memory is ok by using memcheck
- verify that your HDD is ok (no bad sectors) by using a tool provided by the manufacturer of your HDD(s).

Founder of DriverPacks.net — wimleers.com

Wim Leers's Website

  • Registered: 2007-03-27
  • Posts: 1

Re: [CLOSED] Silicon Image 3112 BSOD after file copy

I am new to the forum but I have been using the Driverpacks for sometime now
I too was seeing that awful BSOD screen.The way I fixed it was to edit the txtsetup.sif file.
Remove all lines refering to SI3112, DO NOT DELETE ANY LINES CONTAINING SI3112r

After editing the txtsetup.sif file I have yet to encounter a BSOD.
I have used this on about 20 different systems.


Thanks go to Bâshrat the Sneaky and the Driverpacks team.




My system   Asus A7N8X-Deluxe 3200+, 1.5 gig mem. (2) promise SATA\IDE combo cards

  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [CLOSED] Silicon Image 3112 BSOD after file copy

hi Badnews_Bill

can you test this one for us, please?
http://rapidshare.com/files/22957253/DP … nightly.7z
--------------------

-M-M
Update marvell Driver
replaced Ver= 11/14/2006,1.1.0.51 with marvell downloaded from intel 02/09/2007,1.2.0.24
(this version does not conflict with iastor)

[Marvell]
%mv61xxDesc%=mv61xx_Inst,PCI\VEN_11AB&DEV_6101
%mv61xxDesc%=mv61xx_Inst,PCI\VEN_11AB&DEV_6111
%mv61xxDesc%=mv61xx_Inst,PCI\VEN_11AB&DEV_6121
%mv61xxDesc%=mv61xx_Inst,PCI\VEN_11AB&DEV_6122
%mv61xxDesc%=mv61xx_Inst,PCI\VEN_11AB&DEV_6145



-M-M-O
old marvell DriverVer= 01/06/2006,1.0.0.3 Edited out HWID supported by newer version
Enabled for these three
PCI\VEN_11AB&DEV_6120
   PCI\VEN_11AB&DEV_6140
      VEN_11AB&DEV_6141

Massstorage INI update

removed a duplicate entry
[V-3] appeared twice
adjusted drivercount

edit to Highpoint [H-1] (reported by overflow, confirmed jtdoom)
a Fix for win2003, driver does not exist in XP. (also a Bart_PE fix)

Fixed (Muiz)
ATI (Siliconimage) 3112 driver
-\M\S\4 10/23/2006, 1.3.67.0

Test
edit in Mass storage ini makes Silicon Image raid mode drivers load before Silicon Image NON-raid

The answer was 42?
Kind regards, Jaak.
  • Jaak
  • Old Timer Rookie
  • Offline
  • From: Eeklo, in the East Flanders
  • Registered: 2006-07-23
  • Posts: 3,594

Re: [CLOSED] Silicon Image 3112 BSOD after file copy

Helmi?
please close it
the file is no longer up RS, and no response (and it is in 704 anyway)

The answer was 42?
Kind regards, Jaak.
  • Helmi
  • Moderator & Translator (German)
  • Offline
  • From: Germany
  • Registered: 2006-05-27
  • Posts: 1,799

Re: [CLOSED] Silicon Image 3112 BSOD after file copy

rgr.

http://d1syubgj0w3cyv.cloudfront.net/cdn/farfuture/AeXmpESLemRyQ4RE-dgdjRhN_hKaXMe7woWjOK2wsnk/perpetual:forever/userbar/moderator-3.png

Coming up next - useful links:
• If you like this project, please support it with your donation!      • Grab your HW info (HWIDs) here!     
• If you are a newbie, be sure to check out the DriverPacks tutorial!     • Here's how to create your own DP!