1 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

You nailed it, cdob !!!!!

I disabled the marvell onboard ide, disconnected the IDE dvd-rom, used a sata pioneer dvr-212, voila. No more bsod. So i will stick to using a sata dvd drive on this box.. h*ll.

God, that's a nice conflict there, because the only drivers provided by asus/intel for this motherboard are the AHCI ones. Anyone who has an IDE device connected to it with a sata drive at the same time will get either no drive detected or bsod... NICE.

Thanks a lot of the support guys. This is solved, up to some point.

Go to forum: DriverPack Mass Storage

2 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Hi cdob. Well, the dvd-rom is connected to the only IDE port on the mobo. Which is the marvell ide controller, as you say. Now, that means a workaround would be using a sata dvd-rom drive ?

So if i understand, the problem is that the driver being loaded for the marvell IDE is the same as the onboard sata, so both being loaded leads on a conflict and BSOD ?

I will try with a sata dvd-rom now to see what it does. Be back in 20 smile

Go to forum: DriverPack Mass Storage

3 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Hehe. I don't know Jake, but i know i seriously hate P5Q-SE's now.... big_smile

Go to forum: DriverPack Mass Storage

4 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Vista installed right away without any BSOD's or whatever else. So it's not a hardware issue, can i say that ? Thanks.

Go to forum: DriverPack Mass Storage

5 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

I'm trying to install vista SP1 just for the heck.. :S

Go to forum: DriverPack Mass Storage

6 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Board is new, ive tried another psu, ive tried other power conn, updated bios, cleared rtc.. And so on smile

Go to forum: DriverPack Mass Storage

7 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Well the drivers on the original cd are included on for Raid and AHCI. There is nothing on there for plain Sata/IDE on the sata ports.

It says, RAID is only for P5Q-SE/R and the other folder is for AHCI.

That's why like you said, being set as 'IDE' in the bios, it should work out of the box with a windows cd... I will try each ports 1 by 1 now to see if i get diff behavior.

I might have to RMA the board. What a headache...

Go to forum: DriverPack Mass Storage

8 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

... im wondering if i don't have a defective onboard controller here ?

Go to forum: DriverPack Mass Storage

9 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Overflow, hehe ok. I must be stupid; i tried even using the utils on the original CD from asus P5Q-SE mobo, none of them will work from a floppy using the f6 method. Kinda weird if you ask me..

I appreciate your help, thanks in advance.. cheebster

Go to forum: DriverPack Mass Storage

10 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Overflow, yeah i finally figured that it was included in that file.

The controller is in Enhanced - IDE mode.

EDIT : I had one ORIGINAL SP2 cd, i've tried with this one, and it gives the 'No hard disk detected' error, but no BSOD with it.

What does that mean ?

Go to forum: DriverPack Mass Storage

11 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

From searching in DriverPack_MassStorage_wnt5_x86-32.ini in 8.05 and 9.01, it seems that :

PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00\3&11583659&0&FA: IDE Controller
PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00\3&11583659&0&FD: IDE Controller

Those 2 aren't supported or included in either of the 2. Is that a new HWID for the ICH10 ? Thanks..

Go to forum: DriverPack Mass Storage

12 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Follow up... I was able to run SaveHWIDs by running a live XP distro (that one booted right away...)

Here is the output of it; 

=========== 
PCI Devices 
=========== 
PCI\VEN_1002&DEV_9490&SUBSYS_02941043&REV_00\4&399D3C6A&0&0008: Video Controller (VGA Compatible)
PCI\VEN_1002&DEV_AA38&SUBSYS_AA381043&REV_00\4&399D3C6A&0&0108: PCI Device
PCI\VEN_11AB&DEV_6101&SUBSYS_82E01043&REV_B2\4&34EBACD6&0&00E4: IDE Controller
PCI\VEN_1969&DEV_1026&SUBSYS_83041043&REV_B0\4&20515DB1&0&00E5: Ethernet Controller
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_90\3&11583659&0&F0: PCI to PCI Bridge
PCI\VEN_8086&DEV_2E20&SUBSYS_00000000&REV_03\3&11583659&0&00: PCI HOST Bridge
PCI\VEN_8086&DEV_2E21&SUBSYS_00000000&REV_03\3&11583659&0&08: PCI to PCI Bridge
PCI\VEN_8086&DEV_3A18&SUBSYS_00000000&REV_00\3&11583659&0&F8: PCI to ISA Bridge
PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00\3&11583659&0&FA: IDE Controller
PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00\3&11583659&0&FD: IDE Controller
PCI\VEN_8086&DEV_3A30&SUBSYS_82D41043&REV_00\3&11583659&0&FB: SM Bus Controller
PCI\VEN_8086&DEV_3A34&SUBSYS_82D41043&REV_00\3&11583659&0&E8: Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_3A35&SUBSYS_82D41043&REV_00\3&11583659&0&E9: Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_3A36&SUBSYS_82D41043&REV_00\3&11583659&0&EA: Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_3A37&SUBSYS_82D41043&REV_00\3&11583659&0&D0: Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_3A38&SUBSYS_82D41043&REV_00\3&11583659&0&D1: Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_3A39&SUBSYS_82D41043&REV_00\3&11583659&0&D2: Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_3A3A&SUBSYS_82D41043&REV_00\3&11583659&0&EF: Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_3A3C&SUBSYS_82D41043&REV_00\3&11583659&0&D7: Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_3A3E&SUBSYS_82FE1043&REV_00\3&11583659&0&D8: PCI Device
PCI\VEN_8086&DEV_3A40&SUBSYS_00000000&REV_00\3&11583659&0&E0: PCI to PCI Bridge
PCI\VEN_8086&DEV_3A48&SUBSYS_00000000&REV_00\3&11583659&0&E4: PCI to PCI Bridge
PCI\VEN_8086&DEV_3A4A&SUBSYS_00000000&REV_00\3&11583659&0&E5: PCI to PCI Bridge
23 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&14D59EDA&0
USB\ROOT_HUB\4&1BD273F9&0
USB\ROOT_HUB\4&1D34232F&0
USB\ROOT_HUB\4&3141BC6C&0
USB\ROOT_HUB\4&33D5EF4B&0
USB\ROOT_HUB\4&67E9D0C&0
USB\ROOT_HUB20\4&290CAFBE&0
USB\ROOT_HUB20\4&3097EDFD&0
USB\VID_046D&PID_C01D\5&385A3465&0&2                        : USB-PS/2 Optical Mouse
USB\VID_13FE&PID_1E00\0786133B6174                          : USB DISK 2.0
USBSTOR\DISK&VEN_&PROD_USB_DISK_2.0&REV_PMAP\0786133B6174&0 : USB DISK 2.0 USB Device
11 matching device(s) found.
 
============= 
Input Devices 
============= 
HID\VID_046D&PID_C01D\6&22168054&0&0000
1 matching device(s) found.
 
============ 
ACPI Devices 
============ 
ACPI\ATK0110\1010110
ACPI\FIXEDBUTTON\2&DABA3FF&0
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_0
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_1
ACPI\INT0800\4&CB33808&0
ACPI\PNP0000\4&CB33808&0
ACPI\PNP0100\4&CB33808&0
ACPI\PNP0103\4&CB33808&0
ACPI\PNP0200\4&CB33808&0
ACPI\PNP0303\4&CB33808&0
ACPI\PNP0501\1
ACPI\PNP0700\4&CB33808&0
ACPI\PNP0800\4&CB33808&0
ACPI\PNP0A08\0
ACPI\PNP0B00\4&CB33808&0
ACPI\PNP0C01\1
ACPI\PNP0C01\A
ACPI\PNP0C02\0
ACPI\PNP0C02\10
ACPI\PNP0C02\11
ACPI\PNP0C02\2E
ACPI\PNP0C02\3
ACPI\PNP0C04\4&CB33808&0
ACPI\PNP0C0C\AA
ACPI_HAL\PNP0C08\0
ROOT\ACPI_HAL\0000
26 matching device(s) found.
 
============ 
 HDA Audio 
============ 
No matching devices found.
 
============ 
RAID Devices 
============ 
PCI\VEN_11AB&DEV_6101&SUBSYS_82E01043&REV_B2\4&34EBACD6&0&00E4
    Name: IDE Controller
    Hardware ID's:
        PCI\VEN_11AB&DEV_6101&SUBSYS_82E01043&REV_B2
        PCI\VEN_11AB&DEV_6101&SUBSYS_82E01043
        PCI\VEN_11AB&DEV_6101&CC_01018F
        PCI\VEN_11AB&DEV_6101&CC_0101
    Compatible ID's:
        PCI\VEN_11AB&DEV_6101&REV_B2
        PCI\VEN_11AB&DEV_6101
        PCI\VEN_11AB&CC_01018F
        PCI\VEN_11AB&CC_0101
        PCI\VEN_11AB
        PCI\CC_01018F
        PCI\CC_0101
PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00\3&11583659&0&FA
    Name: IDE Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00
        PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043
        PCI\VEN_8086&DEV_3A20&CC_01018A
        PCI\VEN_8086&DEV_3A20&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_3A20&REV_00
        PCI\VEN_8086&DEV_3A20
        PCI\VEN_8086&CC_01018A
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018A
        PCI\CC_0101
PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00\3&11583659&0&FD
    Name: IDE Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00
        PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043
        PCI\VEN_8086&DEV_3A26&CC_010185
        PCI\VEN_8086&DEV_3A26&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_3A26&REV_00
        PCI\VEN_8086&DEV_3A26
        PCI\VEN_8086&CC_010185
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_010185
        PCI\CC_0101
3 matching device(s) found.

Go to forum: DriverPack Mass Storage

13 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Another attempt, i've tried 9.01 mass storage, directly into an original xp pro sp3 image, selecting text mode and mass storage, with just bootable iso into nlite... Still bsod.

Am i the only one that can't get ICH10 to work with driverpacks, or it works usually ? Thanks.

Go to forum: DriverPack Mass Storage

14 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Ok. Overflow, ive tried http://downloads.driverpacks.net/DP_Mas … -32_805.7z, still stop 7b. Anyone can help ? I really need to get this system working sad

Go to forum: DriverPack Mass Storage

15 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Hehe, well i havent tried linux. I meant i couldn't install any XP version i had. So, anything seems bad with what i was using ? smile

Go to forum: DriverPack Mass Storage

16 Reply by cheebster

(26 replies, posted in DriverPack Mass Storage)

Hi there. Sorry for the lack of details, will try to get this straight now.

Os is windows xp with sp3, sp3 is not slipstreamed it's an original image.

I used nlite. I don't know the HWID of the controller, i can't run any os on the box right now !

The dp base version is 9.02.0.1.

Here is the dps_base.log ;

2009-05-22 18:34:46 : <INIT> DriverPacks BASE 9.02.0.1 initialized.
2009-05-22 18:34:46 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2009-05-22 18:34:46 : <INIT> Created temporary working directory.
2009-05-22 18:34:46 : <INIT> Imported proxy settings from Internet Explorer.
2009-05-22 18:34:46 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Chipset 902!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack CPU 808!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Graphics A 903n3!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Graphics A 904n1!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Graphics A 904n2!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Graphics A 904n3!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Graphics B 8121!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Graphics C 901n1!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack LAN 903n2!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack MassStorage 903r1!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack MassStorage 905r1!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Sound A 903n4!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Sound A 904n1!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Sound A 904n2!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack Sound B 903n1!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack WLAN 90401!
2009-05-22 18:34:46 : <INIT> 	Detected DriverPack WLAN 90402!
2009-05-22 18:34:46 : <INIT> 	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2009-05-22 18:34:46 : <INIT> 	Finished scanning.
2009-05-22 18:34:46 : <INIT> Detected settings file "O:\Data\Apps\DriverPacks 2009-05-11\DPs_BASE.ini".
2009-05-22 18:34:46 : <INIT> No OS could be detected.
2009-05-22 18:34:46 : <INIT> any_any_any is the selected installation platform .
2009-05-22 18:34:46 : <INIT> Imported settings from settings file.
2009-05-22 18:34:46 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2009-05-22 18:34:46 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2009-05-22 18:34:46 : <INIT> [OptionalSettings]\KTD not specified: default (false) was set.
2009-05-22 18:34:46 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2009-05-22 18:34:46 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2009-05-22 18:34:46 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2009-05-22 18:34:46 : <GUI>  Initialized GUI.
2009-05-22 18:34:46 : <GUI>  Created a list of all available language files.
2009-05-22 18:34:47 : <GUI>  Set the last used language, English, as the GUI language.
2009-05-22 18:34:50 : <GUI>  Refreshed UpdateChecker with success.
2009-05-22 18:34:50 : <GUI>  Start scanning for DriverPacks for the wnt5_x86-32 platform.
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Chipset 902!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack CPU 808!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Graphics A 903n3!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Graphics A 904n1!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Graphics A 904n2!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Graphics A 904n3!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Graphics B 8121!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Graphics C 901n1!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack LAN 903n2!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack MassStorage 903r1!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack MassStorage 905r1!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Sound A 903n4!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Sound A 904n1!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Sound A 904n2!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack Sound B 903n1!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack WLAN 90401!
2009-05-22 18:34:50 : <GUI>  	Detected DriverPack WLAN 90402!
2009-05-22 18:34:50 : <GUI>  	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2009-05-22 18:34:50 : <GUI>  	Finished scanning.
2009-05-22 18:34:51 : <GUI>  Refreshed UpdateChecker with success.
2009-05-22 18:34:56 : <GUI>  Changed Windows installation files OR export (depending on the installation platform) location to C:\Documents and Settings\Vincent.FUSIONINFO\Bureau\Windows XP Sp3 Iso Original\WXPVOL_FR.
2009-05-22 18:34:56 : <GUI>  Windows XP Professionnel -  SP3 detected.
2009-05-22 18:34:56 : <GUI>  wnt5_x86-32_disc is the selected installation platform .
2009-05-22 18:35:17 : <GUI>  Saved settings!
2009-05-22 18:35:17 : <GUI>  Closed GUI.
2009-05-22 18:35:17 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2009-05-22 18:35:19 : <PREP> Removed all attributes from \I386.
2009-05-22 18:35:19 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2009-05-22 18:35:19 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2009-05-22 18:36:04 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2009-05-22 18:36:04 : <SLIP> O:\Data\Apps\DriverPacks 2009-05-11\QSC\wnt5_x86-32_uni_DP_MassStorage_905r1_textmode\DriverPack_MassStorage_wnt5_x86-32.ini
2009-05-22 18:36:09 : <SLIP> Processing the files now. This may take a minute.
2009-05-22 18:37:02 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2009-05-22 18:37:02 : <SLIP> txtsetup.sif Backed-up Successfully
2009-05-22 18:37:02 : <SLIP> dosnet.inf Backed-up Successfully
2009-05-22 18:37:14 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2009-05-22 18:37:15 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2009-05-22 18:38:42 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2009-05-22 18:38:42 : <SLIP> Created necessary directory structure for method 2.
2009-05-22 18:38:42 : <SLIP> Copying files necessary for method 2.
2009-05-22 18:38:43 : <SLIP> Extracted additional files necessary for method 2.
2009-05-22 18:38:43 : <SLIP> expanded setup.ex_ to setuporg.exe
2009-05-22 18:38:43 : <SLIP> SETUP.EX_ Backed-up Successfully
2009-05-22 18:38:43 : <SLIP> Compressed setup.exe to SETUP.EX_.
2009-05-22 18:38:43 : <SLIP> Method 2 setup.ex_ installed
2009-05-22 18:38:44 : <SLIP> Created \I386\presetup.cmd file.
2009-05-22 18:38:44 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2009-05-22 18:38:44 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2009-05-22 18:38:44 : <SLIP> Copied DriverPack Chipset to \OEM.
2009-05-22 18:38:44 : <SLIP> Copied DriverPack CPU to \OEM.
2009-05-22 18:38:46 : <SLIP> Copied DriverPack Graphics A to \OEM.
2009-05-22 18:38:50 : <SLIP> Copied DriverPack Graphics B to \OEM.
2009-05-22 18:38:54 : <SLIP> Copied DriverPack Graphics C to \OEM.
2009-05-22 18:38:54 : <SLIP> Copied DriverPack LAN to \OEM.
2009-05-22 18:38:54 : <SLIP> Copied DriverPack MassStorage to \OEM.
2009-05-22 18:38:58 : <SLIP> Copied DriverPack Sound A to \OEM.
2009-05-22 18:39:01 : <SLIP> Copied DriverPack Sound B to \OEM.
2009-05-22 18:39:02 : <SLIP> Copied DriverPack WLAN to \OEM.
2009-05-22 18:39:02 : <SLIP> Copied DriverPacks to \OEM.
2009-05-22 18:39:02 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2009-05-22 18:39:03 : <SLIP> Updated \I386\winnt.sif to support method 2.
2009-05-22 18:39:03 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2009-05-22 18:39:03 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2009-05-22 18:39:03 : <SLIP> DP_Install_Tool was copied successfully
2009-05-22 18:39:03 : <SLIP> Slipstream finished in 3 minutes and 46 seconds.
2009-05-22 18:46:10 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "C:\Documents and Settings\Vincent.FUSIONINFO\Bureau\Windows XP Sp3 Iso Original\WXPVOL_FR"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"
2009-05-22 18:46:10 : <CLNP> Create a DPs_Base.log backup @ O:\Data\Apps\DriverPacks 2009-05-11\LogFiles\DPs_BASE_09-05-22_18-46.log
2009-05-22 18:46:10 : <CLNP> Program terminated.

And here is the dps_base.ini; 

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "C:\Documents and Settings\Vincent.FUSIONINFO\Bureau\Windows XP Sp3 Iso Original\WXPVOL_FR"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"

If anything else is needed, i will be happy to post any details. Thanks a lot for your reply Overflow; so should i try the 805 driverpack now with a new slipstream from a clean source ?

Go to forum: DriverPack Mass Storage

17 Topic by cheebster

(26 replies, posted in DriverPack Mass Storage)

Hi. I'm having a problem getting an intel P5Q-SE (intel ich10) to install using the latest driverpacks, including 905r2 for Mass Storage. All i can get is a 0x0000007B error, bsod. Unaccessible boot device i think it is..

Is ich10 supposed to be supported ? I've tried from a clean source, then nlite with only the Bootable Iso, Unattended and options selected.

I've only got 4 options in bios for the sata controller;

1 - Enhanced - IDE
2 - Enhanced - EHCI
3 - Compatible - IDE
4 - Compatible - EHCI

The 4 of them give a BSOD. I've got only a WD drive connected to it in Sata, dvd-rom is PATA. No other devices there other than a video card.

Am i doing something wrong, is ICH10 supposed to be supported ? If anyone has any clue for me, getting out of hair. Thanks !!!!

Go to forum: DriverPack Mass Storage