Hi no sp4 integrated since there is not in greek language,,HWID is: PCI\VEN_1002&DEV_4391&CC_0106

It`s all the way like this(the characters) even when it stops loading drivers and goes to the main menu that it shows the hard drive/partition.

i confirm that the driverpack DP_MassStorage_wnt5_x86-32_1412115.7z it causing the problem after integrating the older driverpack DP_MassStorage_wnt5_x86-32_1411031.7z the problem does not occur but in the windows setup between at 37-36 minutes left i got a blue screen BSOD saying about the hard disk  stop 0x0000007b anyway this is another thing with the driver
i think the best thing to do is to include only AMD SB7xx & SB8xx textmode driver v3.3.1540.33 for all-any amd masstorage controllers old or new it works with any board i have tried so far,and not so many textmode drivers for many different amd.
like the three musketeers said one for all and all for one!!!

if you cannot do it can you tell me how i can do it myself to delete all the sata amd textmode drivers(except the amd ide ones) from the DP_MassStorage_wnt5_x86-32_1411031.7z pack and leave only the AMD SB7xx & SB8xx textmode driver v3.3.1540.33 with all the amd hardware id`s connected to this driver only.thanks

TechDud wrote:

That sounds very much like failing graphics hardware.
  Check with Misha Cherkes' Video Memory Stress Test, linked in my signature &/or the Windows version, available at his home page.
http://mikelab.kiev.ua/index_en.php?pag … AMS/vmt_en

no graphic falling i mean it wrong probably i had this error before and i fix it but i dont remember how its the font in the main screen of the windows xp setup blue screen they are displaying incorrect the letters like its missing the greek font or something.

this is what i mean go here to see the photo

http://s2.postimg.org/ncpza1wew/281220141088.jpg

Hello i currently have a problem i tried to install xp greek with the latest driverspacks integrated and the characters in the Windows XP setup menu are displaying incorrect like arabic or something
the characters are displaying incorrect from from the "Press any key to boot from CD" until the loading of the drivers and when it finish loading drivers and shows the disk drives still the characters are faulty.
anyone knows whats wrong and how to fix this???
thanks

Hello i think i found a bug!!! installing the complete set of driverpacks in windows 7 sp1 in a laptop that has 2 graphic cards one intel and one nvidia sad3 found the intel but not the nvidia like it`s skipped or something!!!!

intel is hd4000 and nvidia geforce 610m

31

(4 replies, posted in Other)

pos update KB3011843 released in November solved the problem installed from windows,i don`t know if i integrate it with nlite  if will correct the iso also hmm

32

(4 replies, posted in Other)

Thanks for the reply,i have the KB2981580 but not the other one i checked the inf the greek characters are displaying correct there,but still i cannot be sure if there is an error in the update since i dont have a clue how an error look like in the inf,strange issue.and another thing how can i remove the KB2981580 from my windows iso? I search all the inf that nlite changes and i found in Nlite.inf in the iso multiple entries of KB2981580 and also some greek characters incorrect that say egypt in congolese or something language tongue i also found in SVCPACK.inf the following entry "KB2981580.CAT" if i delete this it does not install it? but even if i remove this all the other entries remain in Nlite.inf, i smell another sherlock case here  hmm

i was searching were to post this question and i think i found the place. smile

33

(4 replies, posted in Other)

Hello there I have currently a problem in windows xp sp3 Greek,as you can see in the image the characters in the time zone layout the title of the country after GMT are not displaying correct i`m suspecting an windows update cause this,any ideas?

http://s8.postimg.org/uf8wp2qy9/image.jpg

TechDud wrote:

@OverFlow - Have you still the hardware?

@Symbios24 - Ah, those two aforementioned HWID's could be in a variety of hardware, including Lenovo G405/G505 series, by the way .

Hello No,i only have the amd c60 netbook(Acer aspire one 522) With Hwid "PCI\VEN_1002&DEV_4391&CC_0106" is it enough for test it? any way to test ti with VirtualBox? does it have different hardware-chipset emulation configurations?

TechDud wrote:

Nice work! 

That should have read "rcraid2", yet it matters not what the driver is displayed as, as much as it matters that it doesn't bluescreen again.  Now "ahci886" should be driver name in pre-partitioning textmode.
(Noting some drivers show as "unknown" on Win2k, & i don't yet know why, though it matters not for your XP.)

Do we have confirmation yet if DP_MassStorage_wnt5_x86-32_1411031.7z fixes the problem, or does it bluescreen, and where does it bluescreen if so?

Thank you again, Symbios24!     smile

So the a-series achi controller was correct since it was an a-series chipset but after restart blue series tongue but also the achix86 is compatible too(and working) so the driver V6.1.2.5 was found after windows setup finished was for a-series chipset and also correct.
As far as i remember it was detecting the rcraid or rcraid2 and copy the windows files and after the restart was throwing a blue screen with a checkdisk /f and some other things in chinese  tongue
its difficult to test it since i don`t have the lenovo notebook anymore,is my amd c60 netbook With Hwid "PCI\VEN_1002&DEV_4391&CC_0106" enough to test it,it always detect achix86 v3.3.1540.33  it`s my netbooks default sata controller.

symbios24 wrote:
TechDud wrote:

The 3rd-party MassStorage packs are now depricated as they have been unified in this pack.
2k bug AKA "7 sisters" - satisfied.

DP_MassStorage_wnt5_x86-32_1405176.7z - 10.9 MB   6E6227920907D3DF53579FFC791DE79546BA790D     smile

Hello there is a driver bug with ati.achix86 (DriverVer=06/08/2012, 3.3.1540.33) it founds the controller with a strange name and after the windows has copied files and restart it throws a blue screen.

i found the strange name here it`s rcraid if it matters.

TechDud wrote:
Symbios24 wrote:

"i added with nlite the v3.3.1540.33 in the same windows source, and now it detects the controlled but when the windows setup is finished there is another driver installed in the Scsi-raid controllers section in device manager ämd raid controller 13/9/2013 v6.1.2.5"

So, the driver actually works for that HWID?  That's an easy fix.     smile

Move "PCI\VEN_1022&DEV_7801&CC_0106," from [AM-a-2] in DP_MassStorage_wnt5_x86-32.ini to [AM-8] (two sections above it)  under ms_1_hwids.  If using MS' Notepad, ensure "Word-Wrap" is off before opening the file for editing, so as not to corrupt the file.
Then use 7-zip v9.20 (7-zip settings LZMA,256,32k,512M) and call it DP_MassStorage_wnt5_x86-32_1411031.7z.  Link it here, if you would like.

Please try to confirm the fix works.  I will thank you in the changelog.

Can you make any sense out of the disparate info i have in there concerning partitioning compatibility?
I need all the help i can get to finish this long running branch of this volunteer community project.

Hello with 7zip 7.20 the smallest dictionary size is 64k there isn`t 32k  and the size was more than 20mb if i put it 64k so i put it to 32mb .the word size is 256 and the solid block size is 512mb and the compression level to ultra and the size now its 10mb.i hope its ok.

DP_MassStorage_wnt5_x86-32_1411031.7z

Hello again,glad to help,i still don`t know why it installed driver amd raid controller 13/9/2013 v6.1.2.5 instead of v3.3.1540.33 or a way to fix this,yeah i added it with nlite since i don`t know any other program to add a single masstorage driver only,you think you can find the cause of this so it`installs v3.3.1540.33 as the correct driver?
the  hwid PCI\VEN_1022&DEV_7801&SUBSYS_380217AA&REV_00\3&2411E6FE&0&88 that i found on internet its also from a lenovo g505

thanks

thanks again
the disc with the DP_MassStorage_wnt5_x86-32_1405176.7z detected correct the masstorage driver after i put it with nlite.But the chipset driverpack DP_Chipset_wnt5_x86-32_1405191 after installed a different driver in windows,do you need to repair this to install the correct driver ??

the driver amd raid controller 13/9/2013 v6.1.2.5 must be the newest driver for A4/A6 kabini motherboards and not for sb700/710/sb800 etc. motherboards.but since chipset sb700 and up the 05/28/2012, 3.3.1540.33 driver is working with all the motherboards.strange

http://drivers.softpedia.com/get/MOTHER … 6125.shtml

i tried the erroneous disc in my netbook amd c60 with sb800 chipset and it detected the achi controller as achi886 it should be detected it as achix86 so i think the masstorage driverpack DP_MassStorage_wnt5_x86-32_1405176 has  a little problem with ati achi motherboards detection can you fix that or can you tell me how to fix it??

is it possible the chipset driverpack DP_Chipset_wnt5_x86-32_1405191 to have any bug since it installs another achi driver??

I`m afraid its impossible my friend its not anymore here and the only contact we have its from near,as far as i know from my own netbook acer 522(amd c60) with hardware id PCI\VEN_1102&DEV4391&CC_0106 they look the same the only different thing was the gpu 6290 mine 8210 his. the chipset was using the same driver as mine, it had win7 someone put it but they still performing very slow,dual core not quad core unfortunately.i`m using driverpacks base since 2009 trying to do the perfect windows disc that has everything so after format i dont have to put anything at all drivers or programs for my work(computer technician)
i use linux on my cubieboard to make an access point to have internet all over the house from a connection i get from the neighbor.

this is the exact spec of the chipset/cpu/gpu of my friends

http://www.notebookcheck.net/AMD-E-Seri … 894.0.html

i found from another e1-2100 lenovo notebook in internet the hardware id:

PCI\VEN_1022&DEV_7801&SUBSYS_380217AA&REV_00\3&2411E6FE&0&88

what i mean with the "do you happen to know the side-effects of the latest masstorage pack?" is if this driverpack has any known problems at all with any other masstorage drivers/chipsets?? was the ati achi the only problem? since this is my install image for formatting computers in general for my work and i don`t want to get into the same problem of another erroneous storage controller when formatting. or you hardly suggest to use the official v12.09 masstorage driverpack for my work ?? thanks

TechDud wrote:

see above

do you know this driver that is found from in what chipset it belongs? or is just born from my expiriment? tongue

i can imagine i had sometimes accidents like that before,the computer is working without any problems at all

unfortunately i dont have it anymore it was a friends laptop that i had to format as fast as possible

it was this model:

http://www.notebookcheck.net/Lenovo-G505.102686.0.html

do you happen to know the know side-effects or some of the latest masstorage pack?

TechDud wrote:

see above

i did another thing coz i was in a hurry, i added with nlite the v3.3.1540.33 in the same windows source, and now it detects the controlled but when the windows setup is finished there is another driver installed in the Scsi-raid controllers section in device manager ämd raid controller 13/9/2013 v6.1.2.5"
is this correct? it should be v3.3.1540.33 as far as i know or not?

TechDud wrote:

The 3rd-party MassStorage packs are now depricated as they have been unified in this pack.
2k bug AKA "7 sisters" - satisfied.

DP_MassStorage_wnt5_x86-32_1405176.7z - 10.9 MB   6E6227920907D3DF53579FFC791DE79546BA790D     smile

Hello there is a driver bug with ati.achix86 (DriverVer=06/08/2012, 3.3.1540.33) it founds the controller with a strange name and after the windows has copied files and restart it throws a blue screen.

cheche wrote:

Could you provide the url?

here is the files

http://www.filedropper.com/9321020

TechDud wrote:

... also, if i have this correct:

Quote of mr_smartepants:   "This is why we (continually) recommend people to start with a factory-fresh Microsoft hologramed CD image."

I swear the odds are good that if you integrated that nightly with DPs_BASE (QSC=off see QuickStream Cache + delete existing cache folder in DPs_BASE tree) and a virgin source you wouldn't get a $7B blue screen.

Until you give that a try, your existing image is for the most part, only good for ATAPI installs.

If however; after trying a test integration and test install (copy logs setup*.log, dp*.log), please post your HWID's via the HWID's tool linked in many of the signatures here at the following topic to avoid further dilution of this topic with a unrelated matter.  http://forum.driverpacks.net/viewtopic. … 592#p57592

Please start a new topic from time to time, in a relevant area to remain on-topic.
That makes it easier for readers to find the information they need.(though that may sound ironic to some ... d'oh)

Problems fixed thanks

Hello the chipset driver for the Intel(R) 82801G (ICH7) included in the DP_Chipset_wnt5_x86-32_1405191.7z its the 2009 version and the latest version available is in 2012 can you please update it
thanks

OverFlow wrote:

Exactly... sysoc.inf is not being called, is that an issue with svcpack or ROE???

The internal addons(inf) that their entries stored in the sysoc.inf are not been installed,They are Probably called ROE since they are not svcpack addons,how to call it??

problem is fixed(partial) it was the Kels_CPLBonus_v13.2_addon fault

now i got a blue screen(BSOD) at 2 minutes remaining to finish the windows setup saying:

A problem has been detected and Windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check for viruses on your computer. Remove any newly installed
hard drives or hard drive controllers. Check your hard drive
to make sure it is properly configured and terminated.
Run CHKDSK /F to check for hard drive corruption, and then
restart your computer.

Technical Information:

*** STOP: 0x0000007B (0xBACC3524,0xC0000034,0x00000000,0x00000000)

i manage to find the cause here its the achi masstorage driver i did the setup by setting  in ide(instead of native sata) mode the harddisk and setup finished without a  blue screen .the tested  sata controller is the Intel I/O Controller Hub 7 (ICH7)
Is the driverpack DP_MassStorage_wnt5_x86-32_1405176.7z having any errors or bugs?

but this is not the only problem after windows setup in ide mode finished no drivers are installed for any device at all whats going on here..

mr_smartepants wrote:

Sounds like you broke your svcpack.inf or cmdlines.txt or txtsetup.sif file.

Are the addons installing in the image you tested before you integrated DriverPacks?
You ARE testing each stage before moving on to the next modification...right?
Are they "svcpack" or "ROE" addons?
http://www.msfn.org/board/topic/76913-c … vcpackinf/

the are roe addons their entries are in the SYSOC.INF file
i`m testing the image step by step the addons are tested before.
to broke the svcpack i dont think so coz the addons there are installed
only the addons in the SYSOC.INF are not installed.

its an old version of tuneup 5 years old avg did not had tune up back then, it goes pair to pair with the windows visual style theme,that`s why i need it,anyway i did a clean install first some internal addons  then driverpacks and tried the image it seems that the internal addons are not getting installed anyone knows whats wrong and how to fix it?

OverFlow wrote:
symbios24 wrote:
botus wrote:

well there's one of your problems!


try a simple search...  Description: TUProgSt.exe is not essential for Windows and will often cause problems

i did now have any problems before with this,do you know why its not running as before?

is this the reason that is not working in the log of dpbase? "Will not slipstream patches, Service Pack 3 was detected" ? or what that does it mean??

all of the patches we added to images prior to SP3 (IE a SP2 source) are included with SP3. If you have the most recent version (SP3) no patches are required (since they are included in SP3) and none are added. this is expected behavior. IT IS WORKING PERFECT.

you just answered your own question, changes were made after you added DriverPacks. This almost always results in errors. DriverPacks is the LAST step in creating your image. Or else.

I agree with my team, you need to start clean and you need to not add garbage as part of the install. If you want to add it post install that is up to you. I wouldn't. Adding extraneous garbage to your install is just asking for failure. The main reason people reinstall is to get RID of that kind of useless crap.

the link mr_smartepants included clearly demonstrates that this app is garbage.
AVG... Really? Aaaagh http://forum.driverpacks.net/viewtopic. … 005#p51005

thanks i understand,i agree avg is not really an antivirus at all , i use nod32 for years now the best.