You are not logged in. Please login or register.
Active topics Unanswered topics
Search options (Page 6 of 6)
DriverPacks.net Forum » Posts by Damnation
Original thread: http://forum.driverpacks.net/viewtopic. … 211#p49211
I was trying to install XP using a USB3 drive, but it would always give a 0x7b BSOD at phase 1.
So I modified the Massstorage Drivers Pack:
http://www.megafileupload.com/en/file/3 … 06-7z.html
Once modified I could install XP off a USB3 drive (with Method 2, and KTD for phase 2)
Any chance these could be added to this pack?
if yes, Etron, Fresco, and VIA, need fixing, phase 1 can't find their files for some reason I can't figure out.
Cinfirmed
0x7b at phase1 with unmodified driverpack, even with method 2
I've has issues with this ve-300 enclosure and the SSDs I've tested with it
Crucual m4 128GB - "bad or N/S HDD" - won't go away, works fine in another enclosure
Intel 330 60GB - works, but only in USB2, firmware freezes in USB3 port (ZM-VE300 frozen on display, drive is undetected)
Can anyone confirm an SSD that works in this?
So try an unmodified massstorage DP with Method 2
in the USB3 ports? or USB2 ports?
I'm pretty sure if I try it in the USB3 port without the USB3 Driver I'll get a 0x7b BSOD
SUCCESS!
I included Chipset Driverspack
I modified the MassStorages Driverspack to include USB3 drivers
I used Method2
I KTDd the Massstorage drivers
I used RunonceEx, cause I like being prompted when it is doing stuff.
Anyway, here is the modified Massstorage pack:
http://www.megafileupload.com/en/file/3 … 06-7z.html
P.S
ETRON, FRESCO, and VIA, aren't working properly, Phase 1 can't find their files, I'm not sure why
ASMEDIA, RENESAS(which I have) and TEXAS, are working however (or Phase 1 won't bother you at least).
But how would method 2 work if phase 1 is going to format the disk anyway?
HWIDs.TXT
===========
PCI Devices
===========
PCI\VEN_197B&DEV_2393&SUBSYS_51021558&REV_90\4&1287F4B9&0&03E1: Base System Device
PCI\VEN_8086&DEV_1C20&SUBSYS_51021558&REV_05\3&11583659&0&D8: High Definition Audio Controller
PCI\VEN_1002&DEV_AA88&SUBSYS_AA881558&REV_00\4&18583ED6&0&0108: High Definition Audio Controller
PCI\VEN_8086&DEV_0101&SUBSYS_51021558&REV_09\3&11583659&0&08: PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_1C22&SUBSYS_51021558&REV_05\3&11583659&0&FB: SM Bus Controller
PCI\VEN_1033&DEV_0194&SUBSYS_51021558&REV_04\4&2B104CD2&0&00E0: Renesas Electronics USB 3.0 Host Controller
PCI\VEN_8086&DEV_0104&SUBSYS_51021558&REV_09\3&11583659&0&00: PCI standard host CPU bridge
PCI\VEN_8086&DEV_1C26&SUBSYS_51021558&REV_05\3&11583659&0&E8: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10EC&DEV_8176&SUBSYS_919610EC&REV_01\4&2F09459&0&00E2: Network Controller
PCI\VEN_8086&DEV_1C03&SUBSYS_51021558&REV_05\3&11583659&0&FA: Standard AHCI 1.0 Serial ATA Controller
PCI\VEN_8086&DEV_1C2D&SUBSYS_51021558&REV_05\3&11583659&0&D0: Standard Enhanced PCI to USB Host Controller
PCI\VEN_197B&DEV_0250&SUBSYS_51021558&REV_05\4&1287F4B9&0&00E1: Ethernet Controller
PCI\VEN_8086&DEV_1C10&SUBSYS_51021558&REV_B5\3&11583659&0&E0: PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_1C3A&SUBSYS_51021558&REV_04\3&11583659&0&B0: PCI Simple Communications Controller
PCI\VEN_197B&DEV_2380&SUBSYS_51021558&REV_30\4&CA6CC07&0&00E3: 1394 OHCI Compliant Host Controller
PCI\VEN_8086&DEV_1C12&SUBSYS_51021558&REV_B5\3&11583659&0&E1: PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_1C49&SUBSYS_51021558&REV_05\3&11583659&0&F8: PCI standard ISA bridge
PCI\VEN_197B&DEV_2391&SUBSYS_51021558&REV_90\4&1287F4B9&0&02E1: SDA Standard Compliant SD Host Controller
PCI\VEN_8086&DEV_1C14&SUBSYS_51021558&REV_B5\3&11583659&0&E2: PCI standard PCI-to-PCI bridge
PCI\VEN_197B&DEV_2392&SUBSYS_51021558&REV_90\4&1287F4B9&0&01E1: Base System Device
PCI\VEN_8086&DEV_1C16&SUBSYS_51021558&REV_B5\3&11583659&0&E3: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_6720&SUBSYS_51041558&REV_00\4&18583ED6&0&0008: Standard VGA Graphics Adapter
22 matching device(s) found.
===========
USB Devices
===========
USB\VID_8087&PID_0024\5&390818D9&0&1 : Generic USB Hub
USBSTOR\DISK&VEN_M4-CT128&PROD_M4SSD1&REV_0309\000000001152032F68F0&0: M4-CT128 M4SSD1 USB Device
USB\ROOT_HUB20\4&3243450A&0 : USB Root Hub
USB\ROOT_HUB20\4&374FC250&0 : USB Root Hub
USB\VID_147E&PID_1001\6&2EC8E281&0&5 : Fingerprint Sensor
USB\VID_174C&PID_5106\000000001152032F68F0 : USB Mass Storage Device
USB\VID_5986&PID_0308\6&2EC8E281&0&6 : USB Composite Device
USB\VID_5986&PID_0308&MI_00\7&1357B643&0&0000 : BisonCam, NB Pro
USB\VID_8087&PID_0024\5&1454A3F9&0&1 : Generic USB Hub
9 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\PNP0F13\4&1AC7E370&0 : PS/2 Compatible Mouse
ACPI\INT340E\2&DABA3FF&2 : Motherboard resources
ACPI\THERMALZONE\THM0 : ACPI Thermal Zone
ACPI\INT3F0D\4&1AC7E370&0 : Motherboard resources
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ACPI\PNP0000\4&1AC7E370&0 : Programmable interrupt controller
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_5: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\PNP0100\4&1AC7E370&0 : System timer
ACPI\PNP0103\0 : High precision event timer
ACPI\ACPI0003\2&DABA3FF&2 : Microsoft AC Adapter
ACPI\PNP0200\4&1AC7E370&0 : Direct memory access controller
ACPI\FIXEDBUTTON\2&DABA3FF&2 : ACPI Fixed Feature Button
ACPI\PNP0303\4&1AC7E370&0 : Standard PS/2 Keyboard
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_6: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_1: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\PNP0A08\0 : PCI bus
ACPI\PNP0B00\4&1AC7E370&0 : System CMOS/real time clock
ACPI\PNP0C01\1 : System board
ACPI\PNP0C02\1 : Motherboard resources
ACPI\PNP0C02\10 : Motherboard resources
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_7: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_2: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\PNP0C02\2 : Motherboard resources
ACPI\PNP0C04\4&1AC7E370&0 : Numeric data processor
ACPI\PNP0C09\4&1AC7E370&0 : Microsoft ACPI-Compliant Embedded Controller
ACPI\PNP0C0A\2&DABA3FF&2 : Microsoft ACPI-Compliant Control Method Battery
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_8: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_3: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\PNP0C0C\2&DABA3FF&2 : ACPI Power Button
ACPI\PNP0C0D\2&DABA3FF&2 : ACPI Lid
ACPI\PNP0C0E\2&DABA3FF&2 : ACPI Sleep Button
ACPI\PNP0C14\0 : Microsoft Windows Management Interface for ACPI
ACPI\INT0800\4&1AC7E370&0 : Intel(R) 82802 Firmware Hub Device
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_4: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ROOT\ACPI_HAL\0000 : ACPI x64-based PC
ACPI\PNP0C14\NVIF : Microsoft Windows Management Interface for ACPI
36 matching device(s) found.
============
HDA Audio
============
HDAUDIO\FUNC_01&VEN_1002&DEV_AA01&SUBSYS_00AA0100&REV_1002\5&3283ABE1&0&0001: High Definition Audio Device
HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_15585102&REV_1003\4&2BFCB015&0&0001: High Definition Audio Device
2 matching device(s) found.
============
RAID Devices
============
PCI\VEN_8086&DEV_1C03&SUBSYS_51021558&REV_05\3&11583659&0&FA
Name: Standard AHCI 1.0 Serial ATA Controller
Hardware ID's:
PCI\VEN_8086&DEV_1C03&SUBSYS_51021558&REV_05
PCI\VEN_8086&DEV_1C03&SUBSYS_51021558
PCI\VEN_8086&DEV_1C03&CC_010601
PCI\VEN_8086&DEV_1C03&CC_0106
Compatible ID's:
PCI\VEN_8086&DEV_1C03&REV_05
PCI\VEN_8086&DEV_1C03
PCI\VEN_8086&CC_010601
PCI\VEN_8086&CC_0106
PCI\VEN_8086
PCI\CC_010601
PCI\CC_0106
1 matching device(s) found.
This is from a fresh windows 7 install.
I was earlier attempting to install XP on a USB2 port,
Phase 1 passed successfully, but Phase 2 immediately BSODd with
MULTIPLE_IRP_COMPLETE_REQUESTS
its probably the USB3 drivers,
DPBASE.LOG
2012-09-14 17:11:37 : <INIT> DriverPacks BASE 10.06 initialized.
2012-09-14 17:11:37 : <INIT> Host environment: WIN_7 Service Pack 1 X64 on a X64 CPU.
2012-09-14 17:11:37 : <INIT> Created temporary working directory.
2012-09-14 17:11:37 : <INIT> Imported proxy settings from Internet Explorer.
2012-09-14 17:11:37 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2012-09-14 17:11:37 : <INIT> Detected DriverPack Chipset 1206!
2012-09-14 17:11:37 : <INIT> Detected DriverPack Mass Storage 1206!
2012-09-14 17:11:37 : <INIT> Detected 3rd Party DriverPack myUSB3DriverPack 12.09.14.v1.0!
2012-09-14 17:11:37 : <INIT> Finished scanning.
2012-09-14 17:11:37 : <INIT> Detected settings file "F:\WINDOWSISO\DPs_BASE_1006\DPs_BASE.ini".
2012-09-14 17:11:37 : <INIT> Windows XP Professional - Retail SP3 detected.
2012-09-14 17:11:37 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2012-09-14 17:11:37 : <INIT> Imported settings from settings file.
2012-09-14 17:11:37 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2012-09-14 17:11:37 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2012-09-14 17:11:37 : <GUI> Initialized GUI.
2012-09-14 17:11:37 : <GUI> Created a list of all available language files.
2012-09-14 17:11:37 : <GUI> Set the last used language, English, as the GUI language.
2012-09-14 17:11:46 : <GUI> Refreshed UpdateChecker with success.
2012-09-14 17:12:28 : <GUI> Saved settings!
2012-09-14 17:12:28 : <GUI> Closed GUI.
2012-09-14 17:12:28 : <SEL> Selected module: mod_slip_wxp_x86-32_disc_m1.
2012-09-14 17:12:29 : <PREP> Removed all attributes from \I386.
2012-09-14 17:12:29 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2012-09-14 17:12:29 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2012-09-14 17:12:29 : <SLIP> F:\WINDOWSISO\DPs_BASE_1006\QSC\wnt5_x86-32_uni_DP_MassStorage_1206_textmode\DriverPack_MassStorage_wnt5_x86-32.ini
2012-09-14 17:12:29 : <SLIP> Processing Mass Storage files now. This may take a minute.
2012-09-14 17:12:30 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2012-09-14 17:12:30 : <SLIP> txtsetup.sif Backed-up Successfully
2012-09-14 17:12:30 : <SLIP> dosnet.inf Backed-up Successfully
2012-09-14 17:12:38 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2012-09-14 17:12:39 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2012-09-14 17:13:34 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2012-09-14 17:13:34 : <SLIP> QuickStream Cache available for DriverPack Chipset!
2012-09-14 17:13:34 : <SLIP> QuickStream Cache available for DriverPack Mass Storage!
2012-09-14 17:13:36 : <SLIP> Extracted 3rd party DriverPack DP_myUSB3DriverPack_wnt5_x86-32_12.09.14.v1.0.7z.
2012-09-14 17:13:36 : <SLIP> Started CAB compressing 3rd party DriverPack DP_myUSB3DriverPack_wnt... .
2012-09-14 17:13:40 : <SLIP> Finished CAB compressing 3rd party DriverPack DP_myUSB3DriverPack_wnt... .
2012-09-14 17:13:43 : <SLIP> Slipstreamed DriverPack Chipset using the QuickStream Cache.
2012-09-14 17:13:46 : <SLIP> Slipstreamed DriverPack Mass Storage using the QuickStream Cache.
2012-09-14 17:13:46 : <SLIP> Slipstreamed DriverPack DP_myUSB3DriverPac... using the QuickStream Cache.
2012-09-14 17:13:47 : <SLIP> Extracted bin\DPsFnshr.7z to F:\WINDOWSISO\en_windows_xp_professional_with_service_pack_3_x86_cd_vl_x14-73974\$OEM$\$1.
2012-09-14 17:13:47 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2012-09-14 17:13:47 : <SLIP> Will not slipstream KB888111 because no Sound DriverPack is being slipstreamed
2012-09-14 17:13:47 : <SLIP> Will not slipstream KB883667 because no Graphics DriverPack is being slipstreamed
2012-09-14 17:13:47 : <SLIP> Updated \I386\winnt.sif to support method 1.
2012-09-14 17:13:47 : <SLIP> Created OemPnpDriversPath entry. The length is 1235, which does not exceed the 4096 characters limit.
2012-09-14 17:13:47 : <SLIP> Added OemPnpDriversPath entry to \I386\winnt.sif.
2012-09-14 17:13:47 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2012-09-14 17:13:49 : <SLIP> Updated F:\WINDOWSISO\en_windows_xp_professional_with_service_pack_3_x86_cd_vl_x14-73974\$OEM$\cmdlines.txt to execute ROE.exe.
2012-09-14 17:13:50 : <SLIP> DP_Install_Tool was copied successfully
2012-09-14 17:13:50 : <SLIP> Slipstream finished in 1 minutes and 21 seconds.
2012-09-14 17:13:54 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "F:\WINDOWSISO\en_windows_xp_professional_with_service_pack_3_x86_cd_vl_x14-73974"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "1"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "RunOnceEx"
; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID = "default"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_MassStorage = "yes"
DPs_3rd_party = "yes"
DP_MassStorage_textmode = "yes"
2012-09-14 17:13:54 : <CLNP> Create a DPs_Base.log backup @ F:\WINDOWSISO\DPs_BASE_1006\LogFiles\DPs_BASE_12-09-14_17-13.log
2012-09-14 17:13:54 : <CLNP> Program terminated.
gotta go to bed, will get the HWIDs tomorrow
OK So I've got it working properly - at least through USB2 ports
what I would like to do now is inject USB3 driver into the Textmode so it won't give a 0X7B BSOD when in a USB3 port.
I've made a TXTSETUP.OEM file for my Renesas USB3 controller:
[Disks]
disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\
[Defaults]
SCSI=nusb3xhc
[SCSI]
nusb3xhc="Renesas USB3 Controller Driver"
nusb3hub="Renesas USB3 HUB Driver"
[Files.SCSI.nusb3xhc]
driver=disk1,nusb3xhc.sys,nusb3xhc
inf=disk1,nusb3xhc.inf
catalog=disk1,nusb3xhc.cat
[Files.SCSI.nusb3hub]
driver=disk1,nusb3hub.sys,nusb3hub
inf=disk1,nusb3hub.inf
catalog=disk1,nusb3hub.cat
[HardwareIds.SCSI.nusb3xhc]
id="PCI\VEN_1033&DEV_0194","nusb3xhc"
[HardwareIds.SCSI.nusb3hub]
id="NUSB3\ROOT_HUB30","nusb3hub"
id="NUSB3\CLASS_09","nusb3hub"
in the 3rd party drivers folder.
DP BASE didn't add any entries for them into txtsetup.sif though.
Can anyone help?
I'm using nlite, and am trying to inject Massstorage drivers for my XP installer,
it seems to inject fine, but when I run the installer, it says it cannot find files, and then gives a 7B blue screen
any help?
Posts found [ 126 to 135 of 135 ]
DriverPacks.net Forum » Posts by Damnation
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.016 seconds, 6 queries executed ]