You are not logged in. Please login or register.
Active topics Unanswered topics
Search options
I'm glad that worked for you. Why do you need the bartpe and UBCD?
I just want to make sure I don't. Don't want to miss out on anything.
Well....
What have I missed? I've tried to get the drivers for the LSI raid on the S3000AH going in bartpe every way I can think of.
I've tried XP and 2003 server source files. Driverpack 8.02.1 and standard bartpe driver adding.
I did put the drivers for a Intel S5000VSA board using the built in raid and it worked the first time on that board so I know I can do it.
I'm just missing something. Any ideas will still be appreciated..
I know this is doable.. 
Thanks,
Kevin
Here is a link to my driver disk.
http://www.fieldtek.net/3000ah.zip
Let me know how it works.
Kevin
I just tried the new pebuilder with XP SP2 as the source with no luck.
Sjayp, I can use F6 and install the driver from a floppy disk. You can't?
Kevin
Just tried a new load of pebuilder built with 2003 server media, the driverpack base with 8.02.01 driverpack masstorage update.
Couldn't see the drives. I would try Jaak's test pack but the download link is no good now.
I guess I'll build it again using XP and test.
I anyone has any ideas please let me know.
Thanks,
Kevin
It does say the following also:
On-Board SATA RAID
- Intel® Matrix Storage Technology supports software SATA RAID 0, 1, 10 and 5.
Microsoft Windows® driver support only
? Intel® Embedded Server RAID Technology and the LSI* Logic SATA controller
support software SATA RAID 0, 1 and 10.
Driver support available for all supported operating systems
I'll try a fresh pebuilder with no other drivers and try it using 2003 source files and XP. I've been using XP I believe. It's been over a year since I created the first one. I would have tried it today but we had two guys out and I didn't have time.
I'll report back..
Thanks,
Kevin
I did some firmware flashing for cdob on the sil 3132 and posted the hwids. Do you all need that info?
I can try the UBCD4win if you think it would be better in the long run. I make a bartpe cd for whatever image I want to put on a computer.
It connects to our image server, logs in, runs whatever command I have in the penetconfig.ini to image. We have used ghost for the last few years but now we're trying to switch to imagex since it's free. The main difference is that I have to use diskpart now when Ghost didn't require that.
When we get a new Intel mobo and the nic won't work I just update the nic drivers and it always works. I've had problems with the server boards starting with the Intel 7230 and now the S3000AH and the S5000VSA. If the UBCD4win will make this stuff work I'll have to try it.
Do you think UBCD4win would work better for me??
Thanks,
Kevin
I could do that. Where do I go to do that?
Also, just tried the new driverpack and have gotten the same result.
I can see the two drives on the Siig as non raid. They show up as 75Gb and the LSI raid ones are 74Gb when I use the F6 floppy. Wonder what the heck I'm doing wrong? After booting I'm running diskpart list disk.. Maybe I need to start with a virgin pebuilder load.. You think???
Kevin
Wow!
That was fast.
Couldn't get better service if I was paying...
I'll try it in a little while. I have to drive to work to test it.
Thanks!!
Kevin
I'm using bartpe only. I do have other mass storage drivers installed. Not LSI but several others.
The plugin is enabled. Actually the base says disabled but the driverpack says enabled.
I'll remove the other drivers and try again.
Thanks for your help!
Kevin
Is this what you need? I don't know which one is the LSI.
I ran this a week ago on another computer and I believe it said Intel LSI raid. Maybe a bios version or something.
Thanks,
PCI\VEN_1095&DEV_3132&SUBSYS_71321095&REV_01\4&2D8B019B&0&00E4
Name: RAID Controller
Hardware ID's:
PCI\VEN_1095&DEV_3132&SUBSYS_71321095&REV_01
PCI\VEN_1095&DEV_3132&SUBSYS_71321095
PCI\VEN_1095&DEV_3132&CC_010400
PCI\VEN_1095&DEV_3132&CC_0104
Compatible ID's:
PCI\VEN_1095&DEV_3132&REV_01
PCI\VEN_1095&DEV_3132
PCI\VEN_1095&CC_010400
PCI\VEN_1095&CC_0104
PCI\VEN_1095
PCI\CC_010400
PCI\CC_0104
PCI\VEN_8086&DEV_27C3&SUBSYS_348F8086&REV_01\3&61AAA01&0&FA
Name: RAID Controller
Hardware ID's:
PCI\VEN_8086&DEV_27C3&SUBSYS_348F8086&REV_01
PCI\VEN_8086&DEV_27C3&SUBSYS_348F8086
PCI\VEN_8086&DEV_27C3&CC_010400
PCI\VEN_8086&DEV_27C3&CC_0104
Compatible ID's:
PCI\VEN_8086&DEV_27C3&REV_01
PCI\VEN_8086&DEV_27C3
PCI\VEN_8086&CC_010400
PCI\VEN_8086&CC_0104
PCI\VEN_8086
PCI\CC_010400
PCI\CC_0104
I have LSI raid enabled. Also have an addin Siig with silicon image 3132 controller.
Bartpe works ok with the Siig and nic. I'm trying to figure out how to get a mass storage driver for the Intel LSI.
I've tried the normal bartpe driver install with the Intel driver but I still can't see the drives on the LSI.
After reading other posts I downloaded and tried the new driverpack 8.02.1 with no success. Also, when I use the driverpack plugin I can't see my Siig Raid drives. I'm not worried about the Siig right now.. I'd just like to get the LSI raid working...
Thanks,
Catdog8
Hello....
I'm also looking for the LSI driver for the Intel S3000AH. Can you repost a goog link or is it in a download section somewhere?
I've been messing with this board for a while and haven't been able to get a driver to work.
Thanks!
Kevin
The Siig works ok. It's the Intel embedded LSI that won't work unless I use the driverpack. I'm using base 7052 and the addon [platform="wnt5_x86-32" name="MassStorage" ; version 801 (Jan 19)].
Wonder why when I use the driverpack my NIC and existing Siig driver won't work. When I get a chance I'll try a new pebuilder install with only the driverpack, siig and nic drivers and see what happens.
Thanks,
Kevin
I'm using the Intel S3000AH with LSI raid enabled. Also have an addin Siig.
My Bartpe works ok with the Siig and nic. I'm trying to figure out how to get a mass storage driver for the Intel LSI. I've tried the normal bartpe driver adding that I've been using but it still won't see the drives.. I installed the Bâshrat the Sneaky driverpack plugin and installed it. It lets me see the Intel LSI raid drives but my nic and Siig drivers seem to stop working.. I think I need to figure out how to have these exist happily together or figure out how to extract the driver for my Intel LSI raid and put it in bartpe as a regular driver..
Any ideas on how to proceed would be GREAT!!!
Thanks,
Kevin
Posts found [ 14 ]
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.014 seconds, 5 queries executed ]