1 Reply by zappullae

(16 replies, posted in Feedback and Support - DriverPacks Base)

cdob, I did install it outside the plugiun folder.  I posted a working log file not the original.  The base install of the app failed with the error dialog "there are not yet any slipstream modules available for the selected platform".   Once I got it to run it created a BASE folder in the plugin folder and I used that install to try and unpack.  That's how it ended up in the log as you pointed out.  Its not that I installed it there.

When I ran DriverPack config from the plugin folder it deleted all the driver pack folders and didn't recreate them so I stopped using that.  As it turns out a proper configuration would have worked but until I had that I didn't trust the plugin config route.

The mass storage driver pack is in the Driver Packs folder and it shows up as "up to date" on the pack select screen.  Without manually modifying the ini file there wasn't any text mode option to select.   Believe me, I wanted to select text mode but couldn't.

So you can clearly see that I followed your instructions and tried to make this work as planed.  The mistake I made was to not to browse for the PE  install location.  I missed the "On the location page (see fig1) Select BartPE and "Browse" to your Plugin folder. " step and that caused all kinds of havoc.

I hope this clears things up.

Go to forum: Feedback and Support - DriverPacks Base

2 Reply by zappullae

(16 replies, posted in Feedback and Support - DriverPacks Base)

Got it.  Thanks again for the help.  I have it working now...ed

Go to forum: Feedback and Support - DriverPacks Base

3 Reply by zappullae

(16 replies, posted in Feedback and Support - DriverPacks Base)

OK, good news.  The new MassStorage pack worked.  UBCD had V9.  I no longer need the Dell SATA drivers.  Thanks.

Go to forum: Feedback and Support - DriverPacks Base

4 Reply by zappullae

(16 replies, posted in Feedback and Support - DriverPacks Base)

OK.  It looks like that worked.  I must have missed the instructions to modify the ini file.  So when I add LAN or WLAN packs I should select the entry in [SelectDriverPacks] to no?

Here's my log file:

2011-05-23 07:35:36 : <INIT> DriverPacks BASE 10.06 initialized.
2011-05-23 07:35:36 : <INIT> Host environment: WIN_7 Service Pack 1 X64 on a X64 CPU.
2011-05-23 07:35:36 : <INIT> Created temporary working directory.
2011-05-23 07:35:36 : <INIT> Imported proxy settings from Internet Explorer.
2011-05-23 07:35:36 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-05-23 07:35:36 : <INIT> 	Detected DriverPack Mass Storage 1104!
2011-05-23 07:35:36 : <INIT> 	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2011-05-23 07:35:36 : <INIT> 	Finished scanning.
2011-05-23 07:35:36 : <INIT> Detected settings file "C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2011-05-23 07:35:36 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2011-05-23 07:35:36 : <INIT> Imported settings from settings file.
2011-05-23 07:35:36 : <INIT> [OptionalSettings]\QSC BartPE default (no)    was set.
2011-05-23 07:35:36 : <GUI>  Initialized GUI.
2011-05-23 07:35:36 : <GUI>  Created a list of all available language files.
2011-05-23 07:35:36 : <GUI>  Set the last used language, English, as the GUI language.
2011-05-23 07:35:39 : <GUI>  Refreshed UpdateChecker with success.
2011-05-23 07:35:50 : <GUI>  Saved settings!
2011-05-23 07:35:50 : <GUI>  Closed GUI.
2011-05-23 07:35:50 : <SEL>  Selected module: mod_slip_wnt5_x86-32_bartpe.
2011-05-23 07:35:56 : <PREP> Existing LAN won't be changed.
2011-05-23 07:36:18 : <PREP> C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\MassStorage was deleted.
2011-05-23 07:36:18 : <PREP> C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\MassStorage\MassStorage.inf header info written.
2011-05-23 07:36:21 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2011-05-23 07:36:21 : <SLIP> C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2011-05-23 07:36:21 : <SLIP> Processing Mass Storage files now. This may take a minute.
2011-05-23 07:36:41 : <SLIP> Copied DriverPack MassStorage text mode driver files to BartPE Plugin folder.
2011-05-23 07:36:41 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2011-05-23 07:36:43 : <SLIP> Updated the MassStorage.ini [SetValue] sections to support DP MassStorage text mode drivers.
2011-05-23 07:36:55 : <SLIP> Existing WLAN won't be changed.
2011-05-23 07:36:55 : <PLUGIN> Saved settings!
2011-05-23 07:36:55 : <PLUGIN> Slipstream finished in 1 minutes and 5 seconds.
2011-05-23 07:37:00 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\Dev\UBCD4Win\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= ""


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage	= "no"
DP_MassStorage_textmode = "yes"
2011-05-23 07:37:00 : <CLNP> Create a DPs_Base.log backup @ C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\LogFiles\DPs_BASE_11-05-23_07-37.log
2011-05-23 07:37:00 : <CLNP> Program terminated.

Go to forum: Feedback and Support - DriverPacks Base

5 Reply by zappullae

(16 replies, posted in Feedback and Support - DriverPacks Base)

Not sure about textmode.  I didn't make any setting changes.

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\Dev\UBCD4Win\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "none"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"

Go to forum: Feedback and Support - DriverPacks Base

6 Reply by zappullae

(16 replies, posted in Feedback and Support - DriverPacks Base)

Yes,I followed the instructions.  BASE is installed, works and see the mass storage pack.  Slip stream deletes the old folder if there and I agree.  In all cases it does not create a new folder.  Here's the log:

Thanks for the help...ed


2011-05-22 08:39:09 : <INIT> DriverPacks BASE 10.06 initialized.
2011-05-22 08:39:09 : <INIT> Host environment: WIN_7 Service Pack 1 X64 on a X64 CPU.
2011-05-22 08:39:09 : <INIT> Created temporary working directory.
2011-05-22 08:39:09 : <INIT> Imported proxy settings from Internet Explorer.
2011-05-22 08:39:09 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2011-05-22 08:39:09 : <INIT> 	Detected DriverPack Mass Storage 1104!
2011-05-22 08:39:09 : <INIT> 	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2011-05-22 08:39:09 : <INIT> 	Finished scanning.
2011-05-22 08:39:09 : <INIT> Detected settings file "C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2011-05-22 08:39:09 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2011-05-22 08:39:09 : <INIT> Imported settings from settings file.
2011-05-22 08:39:09 : <INIT> [OptionalSettings]\QSC BartPE default (no)    was set.
2011-05-22 08:39:09 : <GUI>  Initialized GUI.
2011-05-22 08:39:09 : <GUI>  Created a list of all available language files.
2011-05-22 08:39:09 : <GUI>  Set the last used language, English, as the GUI language.
2011-05-22 08:39:12 : <GUI>  Saved settings!
2011-05-22 08:39:12 : <GUI>  Closed GUI.
2011-05-22 08:39:12 : <SEL>  Selected module: mod_slip_wnt5_x86-32_bartpe.
2011-05-22 08:39:14 : <PREP> Existing LAN won't be changed.
2011-05-22 08:39:16 : <PREP> C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\MassStorage was deleted.
2011-05-22 08:39:20 : <PREP> Existing WLAN won't be changed.
2011-05-22 08:39:20 : <PLUGIN> Slipstream finished in 8 seconds.
2011-05-22 08:39:22 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\Dev\UBCD4Win\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "none"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= ""


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"
2011-05-22 08:39:22 : <CLNP> Create a DPs_Base.log backup @ C:\Dev\UBCD4Win\UBCD4Win\plugin\DriverPacks.net\BASE\LogFiles\DPs_BASE_11-05-22_08-39-22.log
2011-05-22 08:39:22 : <CLNP> Program terminated.

Go to forum: Feedback and Support - DriverPacks Base

7 Reply by zappullae

(16 replies, posted in Feedback and Support - DriverPacks Base)

Thanks for the help.  I have driver packs base installed.  I'm told everything is up to date when I run it.   I downloaded the mass storage pack and tried to slip stream it.  It is recognized in the base app and also show's up to date.  When I slip stream it does not create a mass storage folder in plugin\DriverPacks.Net.  The plugin\driverpacks.net only has the BASE folder in it.  Any ideas?


Also, is there a way I can get all the latest driver packs in one download?

Go to forum: Feedback and Support - DriverPacks Base

8 Topic by zappullae

(16 replies, posted in Feedback and Support - DriverPacks Base)

Hi, I've built a UBCD4Win CD and have found that a driver update is needed to support Intel SATA controllers.  I've had to download and add a specific driver for both my desktop and laptop machines.  Is it possible to have this included in the next release of driverpacks,net? 


Intel Rapid Storage 5 Series 6 Port SATA AHCI Controller.

Win XP Driver Version 9.6.0.1014

Applicable to Dell Vostro Notebook - 3400, 3300, 3500, 3700 (and desktops)

Dell driver: R271949

Go to forum: Feedback and Support - DriverPacks Base