1 Reply by jonedeuf

(30 replies, posted in DriverPack Mass Storage)

when i see your post with the screen capture, it looks like my old problem with Jmicron 360 used with a single device on my motherboard.
You could try this:

putting this into your txtsetup.sif

PCI\VEN_197B&DEV_2363&SUBSYS_81E41043="jahci"

it seems JMicron 36x chipset needs jahci driver when used with a single device

Go to forum: DriverPack Mass Storage

2 Reply by jonedeuf

(23 replies, posted in DriverPack Mass Storage)

ok the last test version works fine, no BSOD. Thank you very much

Go to forum: DriverPack Mass Storage

3 Reply by jonedeuf

(23 replies, posted in DriverPack Mass Storage)

Ok, after testing this line in txtsetup.sif:

PCI\VEN_197B&DEV_2360&SUBSYS_03601849="jahci"

all works fine, no BSOD.
Bitman, maybe you can test it ?

muiz3, is it possible to have a test version with this line instead of :
PCI\VEN_197B&DEV_2360&SUBSYS_03601849&REV_02="jahci"

Thanks

Go to forum: DriverPack Mass Storage

4 Reply by jonedeuf

(23 replies, posted in DriverPack Mass Storage)

Hello, i think you should try to manually write that in txtsetup.sif:

PCI\VEN_197B&DEV_2360="jahci"
PCI\VEN_197B&DEV_2360&SUBSYS_03601849&REV_00="jahci"
PCI\VEN_197B&DEV_2360&CC_0104="jraid"
PCI\VEN_197B&DEV_2361&CC_0104="jraid"
PCI\VEN_197B&DEV_2363&CC_0104="jraid"
PCI\VEN_197B&DEV_2365&CC_0104="jraid"
PCI\VEN_197B&DEV_2366&CC_0104="jraid"
PCI\VEN_197B&DEV_2360&CC_0106="jraid"
PCI\VEN_197B&DEV_2361&CC_0106="jraid"
PCI\VEN_197B&DEV_2363&CC_0106="jraid"
PCI\VEN_197B&DEV_2365&CC_0106="jraid"
PCI\VEN_197B&DEV_2366&CC_0106="jraid"

Maybe the line for this motherboard could be:

PCI\VEN_197B&DEV_2360&SUBSYS_03601849="jahci"

i will try in the next hours

Go to forum: DriverPack Mass Storage

5 Reply by jonedeuf

(23 replies, posted in DriverPack Mass Storage)

Ok the test version works fine, no BSOD. After reading motherboard's notice, i've seen that the JMicron chipset is used only for Sata2 devices and for only 1 device, so no Raid possible. The Raid configuration is only available for sata1 devices (max 2 devices) and it's the Uli M1567 chipset which is used in this case. The Jmicron chipset is model 360 (No support for 'hot plug' functions), and i suppose that is a special config for this motherboard.
When entering in bios config, i've 2 choices for the Sata2 device: IDE mode and Sata2. When choosing IDE Mode, the notice says that no additional driver is required, but i had this mode enabled when BSOD appears at 1st boot...

Go to forum: DriverPack Mass Storage

6 Reply by jonedeuf

(23 replies, posted in DriverPack Mass Storage)

Thanks for the test version, i'll test it in the next hours.
About my motherboard, it's a Asrock DualSata 2/A/ASR Serial n°63M0X1012523 Part N° 90-MXG0Y0-A0UAYZ Bios version 1.9

Chipset Model    ULi M1695 K8 Northbridge with PCI-Express and hypertransport
South Bridge    ALI M1563 South Bridge with Hypertransport Support

About JMicron Chipset:
Property    Value
Device ID    PCI\VEN_197BDEV_2360SUBSYS_03601849REV_02\42FF59A8800018
Status    0x0180200a Started
Problem    0x00000000 (0)
Service    JRAID
Capabilities    0x00000000
Config Flags    0x00000000
Class    SCSIAdapter
Manufacturer    JMicron Technology Corp.
Hardware IDs    PCI\VEN_197BDEV_2360SUBSYS_03601849REV_02
    PCI\VEN_197BDEV_2360SUBSYS_03601849
    PCI\VEN_197BDEV_2360CC_010601
    PCI\VEN_197BDEV_2360CC_0106
Compatible IDs    PCI\VEN_197BDEV_2360REV_02
    PCI\VEN_197BDEV_2360
    PCI\VEN_197BCC_010601
    PCI\VEN_197BCC_0106
    PCI\VEN_197B
    PCI\CC_010601
    PCI\CC_0106
Class GUID    {4D36E97B-E325-11CE-BFC1-08002BE10318}
Location    Bus PCI 3, périphérique 0, fonction 0
Bus number    0x00000003
Enumerator name    PCI
Description    JMicron JMB36X Controller
Driver    {4D36E97B-E325-11CE-BFC1-08002BE10318}\0001
Physical Object Name    \Device\NTPNP_PCI0023
Bustype GUID    {44203042-2046-4245-2043-382031302042}
Legacy bus type    0x00000005
Install State    0x00000000
Device Address    0x00000000
Device Configuration File    c:\windows\inf\oem19.inf
Used Files    C:\WINDOWS\system32\DRIVERS\jraid.sys
    C:\WINDOWS\system32\DRIVERS\JGOGO.sys
InfPath    oem19.inf
InfSection    JM
ProviderName    JMicron Technology Corp.
DriverDateData    00 40 7D AC 48 FD C6 01
DriverDate    11-1-2006
DriverVersion    1.17.6.4
MatchingDeviceId    pci\ven_197bdev_2360subsys_03601849
DriverDesc    JMicron JMB36X Controller
   
LegacyAdapterDetection    0
Class    SCSIAdapter
    Contrôleurs SCSI et RAID
Installer32    SysSetup.Dll,ScsiClassInstaller
Icon    -10
LegacyInfOption    SCSI
UpperFilters    JGOGO

About Drivers:

Name    Description    Version    Type    Status    Start    Path    Description
JAHCI    JAHCI    5.0.1636.1    KERNEL_DRIVER    Active    BOOT_START    C:\WINDOWS\system32\drivers\JAHCI.sys    JMicron Storage Host Adapter / JMicron PCIE AHCI Controller
JGOGO    JMicron Hot-Plug Driver    5.0.3790.1    KERNEL_DRIVER    Active    BOOT_START    C:\WINDOWS\system32\drivers\JGOGO.sys    SCSI Port upper filter driver
JRAID    JRAID    1.17.6.3    KERNEL_DRIVER    Active    BOOT_START    C:\WINDOWS\system32\drivers\jraid.sys    JMicron JMB36X RAID Driver

Hope it could help
++

Go to forum: DriverPack Mass Storage

7 Reply by jonedeuf

(23 replies, posted in DriverPack Mass Storage)

When i install DriverPack (Base 7.0.1.5 + Massstorage 7.0.1.1), [HardwareIdsDatabase] in txtsetup.sif is :

PCI\VEN_197B&DEV_2360="jahci"
PCI\VEN_197B&DEV_2360&CC_0104="jraid"
PCI\VEN_197B&DEV_2361&CC_0104="jraid"
PCI\VEN_197B&DEV_2363&CC_0104="jraid"
PCI\VEN_197B&DEV_2365&CC_0104="jraid"
PCI\VEN_197B&DEV_2366&CC_0104="jraid"
PCI\VEN_197B&DEV_2360&CC_0106="jraid"
PCI\VEN_197B&DEV_2361&CC_0106="jraid"
PCI\VEN_197B&DEV_2363&CC_0106="jraid"
PCI\VEN_197B&DEV_2365&CC_0106="jraid"
PCI\VEN_197B&DEV_2366&CC_0106="jraid"

during 1st boot , i get BSOD (0x00007B).

If i add the line: (which is the hardware ID for JMicron on my Asrock DualSata2) it's booting fine

PCI\VEN_197B&DEV_2360="jahci"
PCI\VEN_197B&DEV_2360&SUBSYS_03601849&REV_02="jahci"
PCI\VEN_197B&DEV_2360&CC_0104="jraid"
PCI\VEN_197B&DEV_2361&CC_0104="jraid"
PCI\VEN_197B&DEV_2363&CC_0104="jraid"
PCI\VEN_197B&DEV_2365&CC_0104="jraid"
PCI\VEN_197B&DEV_2366&CC_0104="jraid"
PCI\VEN_197B&DEV_2360&CC_0106="jraid"
PCI\VEN_197B&DEV_2361&CC_0106="jraid"
PCI\VEN_197B&DEV_2363&CC_0106="jraid"
PCI\VEN_197B&DEV_2365&CC_0106="jraid"
PCI\VEN_197B&DEV_2366&CC_0106="jraid"

My config is : one Sata2 HD (Maxtor 6Y 200Go) and 2 dvd burners on ide ports

Go to forum: DriverPack Mass Storage

8 Topic by jonedeuf

(23 replies, posted in DriverPack Mass Storage)

As the title says, i've got BSOD on 1st reboot with that configuration.
I have to add this line to avoid BSOD:

PCI\VEN_197B&DEV_2360&SUBSYS_03601849&REV_02="jahci"

regards

Go to forum: DriverPack Mass Storage

9 Topic by jonedeuf

(1 replies, posted in DriverPack Mass Storage)

Hi, after installing last drivers pack, i get BSOD on first reboot
To avoid that, i rewrote txtsetup.sif :

Before:
PCI\VEN_197B&DEV_2360="jraid"
PCI\VEN_197B&DEV_2361="jraid"
PCI\VEN_197B&DEV_2363="jraid"
PCI\VEN_197B&DEV_2365="jraid"
PCI\VEN_197B&DEV_2366="jraid"

After:
PCI\VEN_197B&DEV_2360="jahci"
PCI\VEN_197B&DEV_2361="jraid"
PCI\VEN_197B&DEV_2363="jraid"
PCI\VEN_197B&DEV_2365="jraid"
PCI\VEN_197B&DEV_2366="jraid"

Hope this could help (sorry for my bad english)

Go to forum: DriverPack Mass Storage