Turns out the hard drive was knackered - finally managed to install Windows 7 where I got lots of warning messages about the hard disk failing imminently, then it refused to boot up and the hard drive wasn't spinning. Thanks for putting time in anyway guys.
1 2010-08-02 09:15:39
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
2 2010-07-27 21:00:55
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
Any joy fellows?
3 2010-07-26 19:25:50
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
Yes, thats correct.
4 2010-07-26 10:35:34
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
0000007B errors again both times 
5 2010-07-26 09:34:45
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
Hang on, you mean a fresh version of XP right? I'll try that now.
6 2010-07-26 09:20:54
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
I did start with a fresh source, well I rebuilt it in BASE if thats what you mean.
7 2010-07-26 07:43:26
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
No luck. Integrated only the latest MassStorage and chipset DriverPacks, same 0000007B error. Downgraded to MassStorage 9.01, failed at the same point, but came up with 'IaStor.sys not present. Setup Failed'.
8 2010-07-26 04:43:18
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
I only tried the latest graphics driverpack 'A' for XP - I'll try using 'B', its also got some Nvidia drivers.
9 2010-07-26 03:25:53
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
Right, after some struggling I installed a portable version of Vista on the machine (it had XP originally) and ran saveHWIDs.exe - here is the result 
===========
PCI Devices
===========
PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&2411E6FE&0&C0: PCI HOST Bridge
PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&2411E6FE&0&C1: PCI HOST Bridge
PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&2411E6FE&0&C2: PCI HOST Bridge
PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&2411E6FE&0&C3: PCI HOST Bridge
PCI\VEN_10DE&DEV_0247&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&28: Video Controller (VGA Compatible)
PCI\VEN_10DE&DEV_0260&SUBSYS_C0211631&REV_A3\3&2411E6FE&0&50: PCI to ISA Bridge
PCI\VEN_10DE&DEV_0264&SUBSYS_C0211631&REV_A3\3&2411E6FE&0&51: SM Bus Controller
PCI\VEN_10DE&DEV_0265&SUBSYS_C0211631&REV_A1\3&2411E6FE&0&68: IDE Controller
PCI\VEN_10DE&DEV_0269&SUBSYS_C0211631&REV_A3\3&2411E6FE&0&A0: Other PCI Bridge Device
PCI\VEN_10DE&DEV_026C&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&81: PCI Device
PCI\VEN_10DE&DEV_026D&SUBSYS_C0211631&REV_A3\3&2411E6FE&0&58: Universal Serial Bus (USB) Controller
PCI\VEN_10DE&DEV_026E&SUBSYS_C0211631&REV_A3\3&2411E6FE&0&59: Universal Serial Bus (USB) Controller
PCI\VEN_10DE&DEV_026F&SUBSYS_00000000&REV_A2\3&2411E6FE&0&80: PCI to PCI Bridge
PCI\VEN_10DE&DEV_0270&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&48: PCI Memory
PCI\VEN_10DE&DEV_0271&SUBSYS_C0211631&REV_A3\3&2411E6FE&0&53: Coprocessor
PCI\VEN_10DE&DEV_0272&SUBSYS_C0211631&REV_A3\3&2411E6FE&0&52: PCI Memory
PCI\VEN_10DE&DEV_027E&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&07: PCI Memory
PCI\VEN_10DE&DEV_027F&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&06: PCI Memory
PCI\VEN_10DE&DEV_02F3&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&00: PCI Memory
PCI\VEN_10DE&DEV_02F8&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&03: PCI Memory
PCI\VEN_10DE&DEV_02F9&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&04: PCI Memory
PCI\VEN_10DE&DEV_02FA&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&01: PCI Memory
PCI\VEN_10DE&DEV_02FC&SUBSYS_000010DE&REV_A1\3&2411E6FE&0&10: PCI to PCI Bridge
PCI\VEN_10DE&DEV_02FD&SUBSYS_000010DE&REV_A1\3&2411E6FE&0&18: PCI to PCI Bridge
PCI\VEN_10DE&DEV_02FE&SUBSYS_C0211631&REV_A2\3&2411E6FE&0&02: PCI Memory
25 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&1B11CD2B&0
USB\ROOT_HUB20\4&35F8454F&0
USB\VID_04E8&PID_5F06\0000002CE09310500811 : USB Mass Storage Device
USB\VID_0DDA&PID_2005\0000001 : USB Mass Storage Device
USB\VID_148F&PID_2573\5&F6BD2C9&0&6 : 802.11 bg WLAN
USBSTOR\DISK&VEN_GENERIC&PROD_IC1210____MMC/SD&REV_1.9C\0000001&2: Generic IC1210 MMC/SD USB Device
USBSTOR\DISK&VEN_GENERIC&PROD_IC1210________CF&REV_1.9C\0000001&0: Generic IC1210 CF USB Device
USBSTOR\DISK&VEN_GENERIC&PROD_IC1210________MS&REV_1.9C\0000001&1: Generic IC1210 MS USB Device
USBSTOR\DISK&VEN_GENERIC&PROD_IC1210________SM&REV_1.9C\0000001&3: Generic IC1210 SM USB Device
USBSTOR\DISK&VEN_SAMSUNG&PROD_STORY_STATION&REV_\0000002CE09310500811&0: Samsung STORY Station USB Device
10 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\ACPI0003\2&DABA3FF&0
ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_72\_0
ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_72\_1
ACPI\FIXEDBUTTON\2&DABA3FF&0
ACPI\PNP0000\4&14F4BC68&0
ACPI\PNP0100\4&14F4BC68&0
ACPI\PNP0200\4&14F4BC68&0
ACPI\PNP0303\4&14F4BC68&0
ACPI\PNP0800\4&14F4BC68&0
ACPI\PNP0A08\1
ACPI\PNP0B00\4&14F4BC68&0
ACPI\PNP0C01\4&14F4BC68&0
ACPI\PNP0C02\1
ACPI\PNP0C02\2
ACPI\PNP0C02\4
ACPI\PNP0C04\4&14F4BC68&0
ACPI\PNP0C09\3&2411E6FE&0
ACPI\PNP0C0A\2&DABA3FF&0
ACPI\PNP0C0C\2&DABA3FF&0
ACPI\PNP0C0D\2&DABA3FF&0
ACPI\PNP0C0E\2&DABA3FF&0
ACPI\SYN0C02\4&14F4BC68&0
ACPI\THERMALZONE\TZ0_
ACPI_HAL\PNP0C08\0
ROOT\ACPI_HAL\0000
25 matching device(s) found.
============
HDA Audio
============
HDAUDIO\FUNC_01&VEN_10EC&DEV_0260&SUBSYS_16318205&REV_1004\4&11EBBC0C&0&0001
HDAUDIO\FUNC_02&VEN_14F1&DEV_2BFA&SUBSYS_14F10001&REV_0900\4&11EBBC0C&0&0102
2 matching device(s) found.
============
RAID Devices
============
PCI\VEN_10DE&DEV_0265&SUBSYS_C0211631&REV_A1\3&2411E6FE&0&68
Name: IDE Controller
Hardware ID's:
PCI\VEN_10DE&DEV_0265&SUBSYS_C0211631&REV_A1
PCI\VEN_10DE&DEV_0265&SUBSYS_C0211631
PCI\VEN_10DE&DEV_0265&CC_01018A
PCI\VEN_10DE&DEV_0265&CC_0101
Compatible ID's:
PCI\VEN_10DE&DEV_0265&REV_A1
PCI\VEN_10DE&DEV_0265
PCI\VEN_10DE&CC_01018A
PCI\VEN_10DE&CC_0101
PCI\VEN_10DE
PCI\CC_01018A
PCI\CC_0101
1 matching device(s) found.10 2010-07-23 09:59:38
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
Ok, got it, but being an .exe I'm going to have trouble running it without a working Windows OS, which so far I haven't managed to achieve. Do you think I can run it from Puppy Linux on a USB stick?
11 2010-07-22 07:34:26
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
Ah, thanks and sorry again! Can't download the savehwids.exe from your sig or link, however.
12 2010-07-22 07:02:50
Re: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
Ah sorry. Thanks for the reply though. If I'm not mistaken the only info I can produce is my (one and only) log file:
<2010-07-20 22:28:12 : <INIT> DriverPacks BASE 10.06 initialized.
2010-07-20 22:28:12 : <INIT> Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2010-07-20 22:28:12 : <INIT> Created temporary working directory.
2010-07-20 22:28:12 : <INIT> Imported proxy settings from Internet Explorer.
2010-07-20 22:28:12 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-07-20 22:28:12 : <INIT> Detected DriverPack Mass Storage 1006!
2010-07-20 22:28:12 : <INIT> Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-07-20 22:28:12 : <INIT> Finished scanning.
2010-07-20 22:28:12 : <INIT> Could not find settings file"C:\Driverpacks\DPs_BASE.ini".
2010-07-20 22:28:12 : <INIT> [General]\prefLang not specified: default (English) was set.
2010-07-20 22:28:12 : <INIT> [General]\wizdButtons not specified: default (yes) was set.
2010-07-20 22:28:12 : <INIT> [General]\GUI not specified: default (yes) was set.
2010-07-20 22:28:12 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2010-07-20 22:28:12 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2010-07-20 22:28:12 : <INIT> [OptionalSettings]\KTD not specified: default (false) was set.
2010-07-20 22:28:12 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2010-07-20 22:28:12 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2010-07-20 22:28:12 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2010-07-20 22:28:12 : <INIT> QuickStream Cache directory not found!
2010-07-20 22:28:12 : <GUI> Initialized GUI.
2010-07-20 22:28:12 : <GUI> Created a list of all available language files.
2010-07-20 22:28:12 : <GUI> Set the last used language, English, as the GUI language.
2010-07-20 22:29:00 : <GUI> Refreshed UpdateChecker with success.
2010-07-20 22:34:39 : <ERR> Download of DriverPack WLAN 10.05.1 failed!
2010-07-20 22:51:34 : <ERR> Download of DriverPack Sound B 10.06 failed!
2010-07-20 23:14:50 : <ERR> Download of DriverPack Sound A 10.06 failed!
2010-07-20 23:17:04 : <ERR> Download of DriverPack LAN 10.05.1 failed!
2010-07-20 23:18:07 : <GUI> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-07-20 23:18:07 : <GUI> Detected DriverPack Mass Storage 1006!
2010-07-20 23:18:07 : <GUI> Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-07-20 23:18:07 : <GUI> Finished scanning.
2010-07-20 23:18:11 : <GUI> Refreshed UpdateChecker with success.
2010-07-21 00:05:58 : <GUI> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-07-21 00:05:58 : <GUI> Detected DriverPack Chipset 10052!
2010-07-21 00:05:58 : <GUI> Detected DriverPack CPU 1005!
2010-07-21 00:05:58 : <GUI> Detected DriverPack Graphics A 1005!
2010-07-21 00:05:58 : <GUI> Detected DriverPack LAN 10051!
2010-07-21 00:05:58 : <GUI> Detected DriverPack Mass Storage 1006!
2010-07-21 00:05:58 : <GUI> Detected DriverPack Sound A 1006!
2010-07-21 00:05:58 : <GUI> Detected DriverPack WLAN 10051!
2010-07-21 00:05:58 : <GUI> Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-07-21 00:05:58 : <GUI> Finished scanning.
2010-07-21 00:06:03 : <GUI> Refreshed UpdateChecker with success.
2010-07-21 00:08:03 : <GUI> Changed Windows installation files OR export (depending on the installation platform) location to C:\Documents and Settings\Rob\My Documents\Downloads\ASD_Light-XPSP2by_t.e.k.o.
2010-07-21 00:08:04 : <GUI> Windows XP Professional - Retail SP2 detected.
2010-07-21 00:08:04 : <GUI> wnt5_x86-32_disc is the selected installation platform .
2010-07-21 00:17:33 : <GUI> Saved settings!
2010-07-21 00:17:33 : <GUI> Closed GUI.
2010-07-21 00:17:33 : <SEL> Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-07-21 00:17:35 : <PREP> Removed all attributes from \I386.
2010-07-21 00:17:35 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2010-07-21 00:17:35 : <SLIP> Created QSC directory.
2010-07-21 00:17:51 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2010-07-21 00:17:51 : <SLIP> C:\Driverpacks\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2010-07-21 00:17:52 : <SLIP> Processing Mass Storage files now. This may take a minute.
2010-07-21 00:18:17 : <SLIP> Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2010-07-21 00:18:17 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2010-07-21 00:18:17 : <SLIP> txtsetup.sif Backed-up Successfully
2010-07-21 00:18:17 : <SLIP> dosnet.inf Backed-up Successfully
2010-07-21 00:18:24 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2010-07-21 00:18:25 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2010-07-21 00:19:01 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2010-07-21 00:19:01 : <SLIP> Created necessary directory structure for method 2.
2010-07-21 00:19:01 : <SLIP> Copying files necessary for method 2.
2010-07-21 00:19:01 : <SLIP> Extracted additional files necessary for method 2.
2010-07-21 00:19:01 : <SLIP> expanded setup.ex_ to setuporg.exe
2010-07-21 00:19:01 : <SLIP> SETUP.EX_ Backed-up Successfully
2010-07-21 00:19:01 : <SLIP> Compressed setup.exe to SETUP.EX_.
2010-07-21 00:19:02 : <SLIP> Method 2 setup.ex_ installed
2010-07-21 00:19:02 : <SLIP> Created \I386\presetup.cmd file.
2010-07-21 00:19:02 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2010-07-21 00:19:02 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2010-07-21 00:19:02 : <SLIP> Copied DriverPack Chipset to \OEM.
2010-07-21 00:19:02 : <SLIP> Copied DriverPack CPU to \OEM.
2010-07-21 00:19:06 : <SLIP> Copied DriverPack Graphics A to \OEM.
2010-07-21 00:19:06 : <SLIP> Copied DriverPack LAN to \OEM.
2010-07-21 00:19:06 : <SLIP> Copied DriverPack Mass Storage to \OEM.
2010-07-21 00:19:11 : <SLIP> Copied DriverPack Sound A to \OEM.
2010-07-21 00:19:11 : <SLIP> Copied DriverPack WLAN to \OEM.
2010-07-21 00:19:11 : <SLIP> Copied DriverPacks to \OEM.
2010-07-21 00:19:11 : <SLIP> English (RyanVM's) UpdatePack detected: no HDA hotfix will be slipstreamed.
2010-07-21 00:19:12 : <SLIP> WINNT.SIF Backed-up Successfully
2010-07-21 00:19:12 : <SLIP> Updated \I386\winnt.sif to support method 2.
2010-07-21 00:19:12 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2010-07-21 00:19:12 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2010-07-21 00:19:12 : <SLIP> DP_Install_Tool was copied successfully
2010-07-21 00:19:12 : <SLIP> Slipstream finished in 1 minutes and 39 seconds.
2010-07-21 00:20:18 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "C:\Documents and Settings\Rob\My Documents\Downloads\ASD_Light-XPSP2by_t.e.k.o"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "yes"
DP_LAN = "yes"
DP_MassStorage = "yes"
DP_Sound_A = "yes"
DP_WLAN = "yes"
DP_MassStorage_textmode = "yes"
2010-07-21 00:20:18 : <CLNP> Create a DPs_Base.log backup @ C:\Driverpacks\LogFiles\DPs_BASE_10-07-21_00-20.log
2010-07-21 00:20:18 : <CLNP> Program terminated.>13 2010-07-21 23:52:04
Topic: Continual 0000007B error (20 replies, posted in Feedback and Support - DriverPacks Base)
Hi, and thanks for providing such an awesome service, it really simplifies things for newbies like me. However, I still haven't got it to work properly, and can't find any topics where anyone else has had this problem. I am trying to install to a Packard Bell Easynote E3265 with AMD Turion x64 processor, having had an HD error which forced me to format. I've downloaded all driver packs for XP x86 and included them in the installation, following the step-by-step instructions precisely (I think). I've checked 'DriverPack MassStorage text mode', to do away with needing a floppy. But still I get to the point where it says 'opening Windows' then I get BSOD and 0000007B error, which as I understand relates to the hard drive controllers lacking drivers.
I don't know where to turn now, please help.