1 Reply by techisgood148

(25 replies, posted in DriverPack Mass Storage)

mr_smartepants wrote:

Yes, we know.  I fixed this exact same problem in the latest dpms test pack. 
If you could, please test any of the test DriverPacks in this post.

Thank you!
The update in your test packs (AM9) in the other thread solve my problem as well.
Drive is detected during setup (ahcix869,) and driver ahcix86.sys version 3.2.1548.37 shows installed in Device Manager.

PCI\VEN_1002&DEV_4391&SUBSYS_B0021458&REV_00\3&61AAA01&0&88
    Name: AMD SATA AHCI Controller
    Hardware ID's:
        PCI\VEN_1002&DEV_4391&SUBSYS_B0021458&REV_00
        PCI\VEN_1002&DEV_4391&SUBSYS_B0021458
        PCI\VEN_1002&DEV_4391&CC_010601
        PCI\VEN_1002&DEV_4391&CC_0106
    Compatible ID's:
        PCI\VEN_1002&DEV_4391&REV_00
        PCI\VEN_1002&DEV_4391
        PCI\VEN_1002&CC_010601
        PCI\VEN_1002&CC_0106
        PCI\VEN_1002
        PCI\CC_010601
        PCI\CC_0106

Keep up the great work, and thanks again!

Go to forum: DriverPack Mass Storage

2 Reply by techisgood148

(25 replies, posted in DriverPack Mass Storage)

mr_smartepants wrote:

Updated
- AM0\ AMD SATA Controller SB600, SB700, SB800(AHCI Mode)
  Updated to DriverVer=05/05/2009,1.2.0.125 (AHCI)
- AM1\ AMD SATA Controller SB600, SB700, SB800(IDE Mode)
  Updated to DriverVer=07/08/2009,5.2.0.57 (IDE)

The addition of AM0 to the 10.09 Mass Storage pack causes my hard drive to no longer be detected by setup when BIOS is set to AHCI Mode. This is on a Gigabyte MA78GM-US2H motherboard with matching HWID for that driver.  Previous pack 10.06, or commenting out AM0 (or skip if wxp) in 10.09 both work fine.  I checked the Gigabyte driver download page for this motherboard, and the driver (in AM0) is not offered for XP, although it does show up in the list for use with Windows 7, so maybe it does not belong in XP pack?
http://www.gigabyte.com/products/produc … id=3118#dl

Since I was reinstalling anyway, I "updated" to this driver in a working XP installation to see if it would even install, got the "not signed" warning, went ahead away, and upon restart just got the ol' no boot/reboot loop.  I tried replacing files within AM0 with copies of 1.2.0.125 that I found while researching, but all resulted in the "amdxata.sys is corrupt" message, or similar, when attempting setup.

I am using Base 10.06 and this relates to Mass storage pack 10.09 for XP - HWID info below

=========== 
PCI Devices 
=========== 
PCI\VEN_1002&DEV_4383&SUBSYS_A0021458&REV_00\3&61AAA01&0&A2 : Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_1002&DEV_4384&SUBSYS_00000000&REV_00\3&61AAA01&0&A4 : PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_4385&SUBSYS_43851458&REV_3A\3&61AAA01&0&A0 : ATI SMBus
PCI\VEN_1002&DEV_4391&SUBSYS_B0021458&REV_00\3&61AAA01&0&88 : AMD AHCI Compatible RAID Controller
PCI\VEN_1002&DEV_4396&SUBSYS_50041458&REV_00\3&61AAA01&0&92 : Standard Enhanced PCI to USB Host Controller
PCI\VEN_1002&DEV_4396&SUBSYS_50041458&REV_00\3&61AAA01&0&9A : Standard Enhanced PCI to USB Host Controller
PCI\VEN_1002&DEV_4397&SUBSYS_50041458&REV_00\3&61AAA01&0&90 : Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_4397&SUBSYS_50041458&REV_00\3&61AAA01&0&98 : Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_4398&SUBSYS_50041458&REV_00\3&61AAA01&0&91 : Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_4398&SUBSYS_50041458&REV_00\3&61AAA01&0&99 : Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_4399&SUBSYS_50041458&REV_00\3&61AAA01&0&A5 : Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_439C&SUBSYS_50021458&REV_00\3&61AAA01&0&A1 : AMD PCI IDE Controller
PCI\VEN_1002&DEV_439D&SUBSYS_00000000&REV_00\3&61AAA01&0&A3 : PCI standard ISA bridge
PCI\VEN_1002&DEV_960F&SUBSYS_960F1458&REV_00\4&1FCA042A&0&2908: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_1002&DEV_9610&SUBSYS_D0001458&REV_00\4&1FCA042A&0&2808: ATI Radeon HD 3200 Graphics
PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&61AAA01&0&C0 : PCI standard host CPU bridge
PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&61AAA01&0&C1 : PCI standard host CPU bridge
PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&61AAA01&0&C2 : PCI standard host CPU bridge
PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&61AAA01&0&C3 : PCI standard host CPU bridge
PCI\VEN_1022&DEV_9600&SUBSYS_00000000&REV_00\3&61AAA01&0&00 : PCI standard host CPU bridge
PCI\VEN_1022&DEV_9602&SUBSYS_00000000&REV_00\3&61AAA01&0&08 : PCI standard PCI-to-PCI bridge
PCI\VEN_1022&DEV_9609&SUBSYS_00000000&REV_00\3&61AAA01&0&50 : PCI standard PCI-to-PCI bridge
PCI\VEN_104C&DEV_8024&SUBSYS_10001458&REV_00\4&CC5B14E&0&70A4: Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_02\4&36A73F9A&0&0050: Realtek PCIe GBE Family Controller
24 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&2163B286&0                                   : USB Root Hub
USB\ROOT_HUB\4&362114AD&0                                   : USB Root Hub
USB\ROOT_HUB\4&3735426B&0                                   : USB Root Hub
USB\ROOT_HUB\4&78963DC&0                                    : USB Root Hub
USB\ROOT_HUB\4&89D919A&0                                    : USB Root Hub
USB\ROOT_HUB20\4&25568EAF&0                                 : USB Root Hub
USB\ROOT_HUB20\4&29D1E53&0                                  : USB Root Hub
7 matching device(s) found.
 
============= 
Input Devices 
============= 
No matching devices found.
 
============ 
ACPI Devices 
============ 
ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_107\_0              : AMD Athlon(tm) 64 X2 Dual Core Processor 5400+
ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_107\_1              : AMD Athlon(tm) 64 X2 Dual Core Processor 5400+
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\PNP0000\4&345537B0&0                                   : Programmable interrupt controller
ACPI\PNP0100\4&345537B0&0                                   : System timer
ACPI\PNP0103\4&345537B0&0                                   : High Precision Event Timer
ACPI\PNP0200\4&345537B0&0                                   : Direct memory access controller
ACPI\PNP0303\3&61AAA01&0                                    : PS/2 Keyboard (106 Keys Ctrl+Caps)
ACPI\PNP0400\3&61AAA01&0                                    : Printer Port (LPT1)
ACPI\PNP0501\1                                              : Communications Port (COM1)
ACPI\PNP0700\3&61AAA01&0                                    : Standard floppy disk controller
ACPI\PNP0800\4&345537B0&0                                   : System speaker
ACPI\PNP0A03\2&DABA3FF&0                                    : PCI bus
ACPI\PNP0B00\4&345537B0&0                                   : System CMOS/real time clock
ACPI\PNP0C01\2&DABA3FF&0                                    : System board
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI\PNP0C02\3                                              : Motherboard resources
ACPI\PNP0C02\4                                              : Motherboard resources
ACPI\PNP0C04\4&345537B0&0                                   : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNP0C14\0                                              : Microsoft Windows Management Interface for ACPI
ACPI\PNP0F13\3&61AAA01&0                                    : Synaptics PS/2 Port Compatible TouchPad
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor PC
24 matching device(s) found.
 
============ 
 HDA Audio 
============ 
HDAUDIO\FUNC_01&VEN_1002&DEV_791A&SUBSYS_00791A00&REV_1000\5&31BD4F5B&0&0001: ATI HDMI Audio
HDAUDIO\FUNC_01&VEN_10EC&DEV_0885&SUBSYS_1458A002&REV_1001\4&B0B129F&0&0001: Realtek High Definition Audio
2 matching device(s) found.
 
============ 
RAID Devices 
============ 
PCI\VEN_1002&DEV_4391&SUBSYS_B0021458&REV_00\3&61AAA01&0&88
    Name: AMD AHCI Compatible RAID Controller
    Hardware ID's:
        PCI\VEN_1002&DEV_4391&SUBSYS_B0021458&REV_00
        PCI\VEN_1002&DEV_4391&SUBSYS_B0021458
        PCI\VEN_1002&DEV_4391&CC_010601
        PCI\VEN_1002&DEV_4391&CC_0106
    Compatible ID's:
        PCI\VEN_1002&DEV_4391&REV_00
        PCI\VEN_1002&DEV_4391
        PCI\VEN_1002&CC_010601
        PCI\VEN_1002&CC_0106
        PCI\VEN_1002
        PCI\CC_010601
        PCI\CC_0106
PCI\VEN_1002&DEV_439C&SUBSYS_50021458&REV_00\3&61AAA01&0&A1
    Name: AMD PCI IDE Controller
    Hardware ID's:
        PCI\VEN_1002&DEV_439C&SUBSYS_50021458&REV_00
        PCI\VEN_1002&DEV_439C&SUBSYS_50021458
        PCI\VEN_1002&DEV_439C&CC_01018A
        PCI\VEN_1002&DEV_439C&CC_0101
    Compatible ID's:
        PCI\VEN_1002&DEV_439C&REV_00
        PCI\VEN_1002&DEV_439C
        PCI\VEN_1002&CC_01018A
        PCI\VEN_1002&CC_0101
        PCI\VEN_1002
        PCI\CC_01018A
        PCI\CC_0101
SCSI\PROCESSOR&VEN_AMD&PROD_RAID_CONSOLE&REV_1.00\4&2765364E&0&0A0
    Name: AMD RAID Console
    Hardware ID's:
        SCSI\ProcessorAMD_____RAID_Console____1.00
        SCSI\ProcessorAMD_____RAID_Console____
        SCSI\ProcessorAMD_____
        SCSI\AMD_____RAID_Console____1
        AMD_____RAID_Console____1
    Compatible ID's:
        SCSI\Processor
        SCSI\RAW

Go to forum: DriverPack Mass Storage

3 Reply by techisgood148

(27 replies, posted in Feedback and Support - DriverPacks Base)

Oops, didn't consider signing - thank you for the explanation and the link!

Go to forum: Feedback and Support - DriverPacks Base

4 Reply by techisgood148

(27 replies, posted in Feedback and Support - DriverPacks Base)

Hi all,

I registered today to let you know that I also had this problem with my Acer Aspire 5570z
when using Chipset pack "DP_Chipset_wnt5_x86-32_1002.7z"

After a few days of failed installs, I found that removing the extra blank line in the ich78id2.inf file
(in the I1 folder) allowed the installation to complete successfully.

(partial copy and paste:)
Before:
<<
%PCI\VEN_8086&DEV_2828.DeviceDesc%=intelide_Inst, PCI\VEN_8086&DEV_2828   
%PCI\VEN_8086&DEV_2850.DeviceDesc%=intelide_Inst, PCI\VEN_8086&DEV_2850   
 

[INTEL_HDC.NTamd64]
%PCI\VEN_8086&DEV_27C0.DeviceDesc%=intelide_Inst, PCI\VEN_8086&DEV_27C0
%PCI\VEN_8086&DEV_27C4.DeviceDesc%=intelide_Inst, PCI\VEN_8086&DEV_27C4
>>

After:
<<
%PCI\VEN_8086&DEV_2828.DeviceDesc%=intelide_Inst, PCI\VEN_8086&DEV_2828   
%PCI\VEN_8086&DEV_2850.DeviceDesc%=intelide_Inst, PCI\VEN_8086&DEV_2850   

[INTEL_HDC.NTamd64]
%PCI\VEN_8086&DEV_27C0.DeviceDesc%=intelide_Inst, PCI\VEN_8086&DEV_27C0
%PCI\VEN_8086&DEV_27C4.DeviceDesc%=intelide_Inst, PCI\VEN_8086&DEV_27C4
>>

This extra carriage return/blank line appears in the "ich78id2.inf" file,
NOT the similarly named "ich78ide.inf" file.

Thank you DriverPacks, for providing this excellent resource, I can't count how many hours
you've saved me when it comes to re-installations; keep up the great work guys/gals!

Go to forum: Feedback and Support - DriverPacks Base