51 Reply by ef

(49 replies, posted in DriverPack Mass Storage)

JakeLD wrote:

This driver is already included, a simple search would have gave you the answer.

My fault, the driver is there, but unfortunately that controller isn't discovered.

JakeLD wrote:

Also please make sure that your BIOS and firmware controller are updated.

Thanks for the suggestion, this is next step I will try: I reminded that 3 months ago the Promise FastTrak S150 SX4 controller was replaced and now also my old UBCD4WIN 3.04 boot disk is not able anymore to discover the controller and disks... Very odd.

JakeLD wrote:

IBM 6M use  Firmware level 7.10 for the ServeRAID-7k, ServeRAID-6M,
ServeRAID-6i/6i+, and ServeRAID-5i Ultra320 SCSI Controllers
PCI\VEN_1000&DEV_0030 for XP use the driver in L8 folder which is not signed. That might be the problem. I will replace this one with a signed one asap.

Ok, let me know when I could try it.

JakeLD wrote:

Also try with XP Sp3 or 2003 SP2 as source. I don't understand why you are using an old service pack anyway. Don't you have enough problems already ?
I also noticed PCI\VEN_1106&DEV_0571 which is a via controller, that specific controller is supported by XP SP3 and not by SP2. That's why we are using the switch replace in the INI file. So using XP SP3 as source sounds like a good idea.

Done with Xp SP3, nothing changes. I didn't try that before because it seems to me that SP2 is still the suggested SP to use with UBCD4WIN to have a stable boot disk.

JakeLD wrote:

You could also try to integrate that plugin into your PE

Driver.inf

[Version]
Signature="$Windows NT$"

[PEBuilder]
Name="Driver: IBM 6M"
Enable=1

[SetupReg.AddReg]
0x4, "CurrentControlSet\Services\nfrd960\Parameters", "PnpInterface", 0x5
0x4, "CurrentControlSet\Services\FastSx\Parameters", "PnpInterface", 0x5

Done, but testing the build on a VM I have the following BSOD:
CONFIG_INITIALIZATION_FAILED
STOP: 0x00000067 (0x00000001,0x00000008,0xC0000035,0x00000000)

Edoardo

Go to forum: DriverPack Mass Storage

52 Reply by ef

(49 replies, posted in DriverPack Mass Storage)

JakeLD,
this is the link for the Promise FastTrak S150 SX4 Windows drivers:

http://www.promise.com/support/download … &go=GO

If possible, please include them and the previously posted Ibm ServerRaid 6m Windows drivers into a new MassStorage DriverPack.
Thank you.

Edoardo

Go to forum: DriverPack Mass Storage

53 Reply by ef

(49 replies, posted in DriverPack Mass Storage)

I can see in the plugin\DriverPacks.net\MassStorage\w2k3 folder in my build that the LSI_SCSI.SY file is of 45,9 KB - 47.067 byte (although as I wrote I'm building from a XP source, I don't know if it's important), but with previous versions of UBCD4WIN I successfully used different drivers for the IBM ServerRaid 6M scsi controller, not the LSI you mentioned from the L10 folder. They are produced by Ibm, so should be reliable.
If you want, tell me how I can send you those drivers. They work for IBM ServeRAID 4M/4L/4Mx/4Lx/5i/6M/6i/7k Controller (Windows 2000/XP)  and IBM ServeRAID 3L/3H/4H Controller (Windows 2003).
Regarding the Promise FastTrak S150 SX4, in my first post I posted what reported by the HWID's tool. Do you need more info? Let me know. Even for this controller, I have Promise drivers which successfully loaded in old UBCD4WIN builds.
If you want, please tell me how to integrate those driver in my build, so I can try myself and report to you.
Thank you.

Edoardo.

Go to forum: DriverPack Mass Storage

54 Reply by ef

(49 replies, posted in DriverPack Mass Storage)

Hi JakeLD,
unfortunately no joy. Let me know how I could check if I did mistakes in the build (i.e. which drivers I have to check, their filename/version and so on).
Also, any work in progress regarding Promise FastTrak S150 SX4 ?
Thank you.

Edoardo

Go to forum: DriverPack Mass Storage

55 Reply by ef

(49 replies, posted in DriverPack Mass Storage)

Hi JakeLD,
So what can I do to fix this? Will you release a fixed MassStorage driverpack?

Go to forum: DriverPack Mass Storage

56 Reply by ef

(49 replies, posted in DriverPack Mass Storage)

Is there anything else I can do to help fixing this bug?

Go to forum: DriverPack Mass Storage

57 Reply by ef

(29 replies, posted in DriverPack Mass Storage)

Same as above posts: W2k3SP1 as source, UBCD4WIN 3.22, Base 8.05, MassStorage driverPack 9.01. Boot halts for a QL2300.sys corruption.
Using WinXPSP2 as source, I don't have the issue.

Go to forum: DriverPack Mass Storage

58 Topic by ef

(49 replies, posted in DriverPack Mass Storage)

Hi,
I created a UBCD4WIN 3.22 boot cd using XP SP2 as source and DriverPacks Base 8.05 + the DP_MassStorage_wnt5_x86-32_901.7z MassStorage DriverPack file only ("DriverPack MassStorage text mode" selected), but the following 2 RAID controllers in 2 different servers were not recognised (no hard disks were found):

- Promise FastTrak S150 SX4 controller on a Fujitsu-Siemens FibreCAT N20i (D1979) - 4 SATA HDDs in a single RAID-5 array - 1st boot logical disk - 2nd non-boot logical disk

------>From the HWID's tool:

============ 
RAID Devices 
============ 
PCI\VEN_105A&DEV_6622&SUBSYS_6622105A&REV_01\4&5A988DE&0&28F0
    Name: Windows Promise FastTrak S150 SX4 (tm) Controller
    Hardware ID's:
        PCI\VEN_105A&DEV_6622&SUBSYS_6622105A&REV_01
        PCI\VEN_105A&DEV_6622&SUBSYS_6622105A
        PCI\VEN_105A&DEV_6622&CC_010400
        PCI\VEN_105A&DEV_6622&CC_0104
    Compatible ID's:
        PCI\VEN_105A&DEV_6622&REV_01
        PCI\VEN_105A&DEV_6622
        PCI\VEN_105A&CC_010400
        PCI\VEN_105A&CC_0104
        PCI\VEN_105A
        PCI\CC_010400
        PCI\CC_0104
PCI\VEN_8086&DEV_266F&SUBSYS_105C1734&REV_03\3&61AAA01&0&F9
    Name: Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
    Hardware ID's:
        PCI\VEN_8086&DEV_266F&SUBSYS_105C1734&REV_03
        PCI\VEN_8086&DEV_266F&SUBSYS_105C1734
        PCI\VEN_8086&DEV_266F&CC_01018A
        PCI\VEN_8086&DEV_266F&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_266F&REV_03
        PCI\VEN_8086&DEV_266F
        PCI\VEN_8086&CC_01018A
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018A
        PCI\CC_0101
SCSI\DISK&VEN_PROMISE&PROD_4_DISK_RAID5&REV_1.10\5&2DC0664C&0&000
    Name: Promise 4 Disk RAID5 SCSI Disk Device
    Hardware ID's:
        SCSI\DiskPromise_4_Disk_RAID5____1.10
        SCSI\DiskPromise_4_Disk_RAID5____
        SCSI\DiskPromise_
        SCSI\Promise_4_Disk_RAID5____1
        Promise_4_Disk_RAID5____1
        GenDisk
    Compatible ID's:
        SCSI\Disk
        SCSI\RAW
SCSI\PROCESSOR&VEN_PROMISE&PROD_RAID_CONSOLE&REV_1.00\5&2DC0664C&0&070
    Name: Promise RAID Console
    Hardware ID's:
        SCSI\ProcessorPromise_RAID_Console____1.00
        SCSI\ProcessorPromise_RAID_Console____
        SCSI\ProcessorPromise_
        SCSI\Promise_RAID_Console____1
        Promise_RAID_Console____1
    Compatible ID's:
        SCSI\Processor
        SCSI\RAW
4 matching device(s) found.

- IBM ServeRAID 6M controller on an IBM eserver xSeries 445 -[8870CTO] - 2 SCSI HDDs in a single RAID-1 array - 1 boot logical disk

------>From the HWID's tool:

============ 
RAID Devices 
============ 
PCI\VEN_1000&DEV_0030&SUBSYS_02A61014&REV_07\3&13C0B0C5&0&18
    Name: LSI Logic 1020/1030 Ultra320 SCSI Adapter
    Hardware ID's:
        PCI\VEN_1000&DEV_0030&SUBSYS_02A61014&REV_07
        PCI\VEN_1000&DEV_0030&SUBSYS_02A61014
        PCI\VEN_1000&DEV_0030&CC_010000
        PCI\VEN_1000&DEV_0030&CC_0100
    Compatible ID's:
        PCI\VEN_1000&DEV_0030&REV_07
        PCI\VEN_1000&DEV_0030
        PCI\VEN_1000&CC_010000
        PCI\VEN_1000&CC_0100
        PCI\VEN_1000
        PCI\CC_010000
        PCI\CC_0100
PCI\VEN_1000&DEV_0030&SUBSYS_02A61014&REV_07\3&13C0B0C5&0&19
    Name: LSI Logic 1020/1030 Ultra320 SCSI Adapter
    Hardware ID's:
        PCI\VEN_1000&DEV_0030&SUBSYS_02A61014&REV_07
        PCI\VEN_1000&DEV_0030&SUBSYS_02A61014
        PCI\VEN_1000&DEV_0030&CC_010000
        PCI\VEN_1000&DEV_0030&CC_0100
    Compatible ID's:
        PCI\VEN_1000&DEV_0030&REV_07
        PCI\VEN_1000&DEV_0030
        PCI\VEN_1000&CC_010000
        PCI\VEN_1000&CC_0100
        PCI\VEN_1000
        PCI\CC_010000
        PCI\CC_0100
PCI\VEN_1106&DEV_0571&SUBSYS_02A61014&REV_06\3&267A616A&0&29
    Name: Controller IDE VIA Bus Master
    Hardware ID's:
        PCI\VEN_1106&DEV_0571&SUBSYS_02A61014&REV_06
        PCI\VEN_1106&DEV_0571&SUBSYS_02A61014
        PCI\VEN_1106&DEV_0571&CC_01018A
        PCI\VEN_1106&DEV_0571&CC_0101
    Compatible ID's:
        PCI\VEN_1106&DEV_0571&REV_06
        PCI\VEN_1106&DEV_0571
        PCI\VEN_1106&CC_01018A
        PCI\VEN_1106&CC_0101
        PCI\VEN_1106
        PCI\CC_01018A
        PCI\CC_0101
PCI\VEN_9005&DEV_0250&SUBSYS_02791014&REV_02\4&8C37DC5&0&4010
    Name: IBM ServeRAID 6M Controller
    Hardware ID's:
        PCI\VEN_9005&DEV_0250&SUBSYS_02791014&REV_02
        PCI\VEN_9005&DEV_0250&SUBSYS_02791014
        PCI\VEN_9005&DEV_0250&CC_010400
        PCI\VEN_9005&DEV_0250&CC_0104
    Compatible ID's:
        PCI\VEN_9005&DEV_0250&REV_02
        PCI\VEN_9005&DEV_0250
        PCI\VEN_9005&CC_010400
        PCI\VEN_9005&CC_0104
        PCI\VEN_9005
        PCI\CC_010400
        PCI\CC_0104
SCSI\DISK&VEN_IBM&PROD_SERVERAID&REV_6.10\5&F3D1498&0&000
    Name: IBM ServeRAID SCSI Disk Device
    Hardware ID's:
        SCSI\DiskIBM_____ServeRAID_______6.10
        SCSI\DiskIBM_____ServeRAID_______
        SCSI\DiskIBM_____
        SCSI\IBM_____ServeRAID_______6
        IBM_____ServeRAID_______6
        GenDisk
    Compatible ID's:
        SCSI\Disk
        SCSI\RAW
SCSI\DISK&VEN_IBM&PROD_SERVERAID&REV_6.10\5&F3D1498&0&010
    Name: IBM ServeRAID SCSI Disk Device
    Hardware ID's:
        SCSI\DiskIBM_____ServeRAID_______6.10
        SCSI\DiskIBM_____ServeRAID_______
        SCSI\DiskIBM_____
        SCSI\IBM_____ServeRAID_______6
        IBM_____ServeRAID_______6
        GenDisk
    Compatible ID's:
        SCSI\Disk
        SCSI\RAW
6 matching device(s) found.

------>DPs_base.log

2009-02-25 12:34:20 : <INIT> DriverPacks BASE 8.05 initialized in API mode by UBCD4WIN Configuration Utility.
2009-02-25 12:34:20 : <INIT> Host environment: WIN_XP Service Pack 3 on X86 CPU.
2009-02-25 12:34:20 : <INIT> Created temporary working directory.
2009-02-25 12:34:20 : <INIT> Imported proxy settings from Internet Explorer.
2009-02-25 12:34:28 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2009-02-25 12:34:28 : <INIT> 	Detected DriverPack MassStorage 9.01!
2009-02-25 12:34:28 : <INIT> 	Could not detect any 3rd party DriverPacks.
2009-02-25 12:34:28 : <INIT> 	Finished scanning.
2009-02-25 12:34:28 : <INIT> Detected settings file "C:\UBCD4Win_3.22\UBCD4Win\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2009-02-25 12:34:28 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2009-02-25 12:34:28 : <INIT> Imported settings from settings file.
2009-02-25 12:34:28 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2009-02-25 12:34:28 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2009-02-25 12:34:28 : <INIT> [OptionalSettings]\KTD default (false) was set.
2009-02-25 12:34:28 : <INIT> [OptionalSettings]\QSC BartPE default (no)    was set.
2009-02-25 12:34:28 : <SEL>  Selected module: mod_slip_wnt5_x86-32_bartpe.
2009-02-25 12:34:28 : <PREP> Existing BASE won't be changed.
2009-02-25 12:34:29 : <PREP> C:\UBCD4Win_3.22\UBCD4Win\PLUGIN\DriverPacks.net\MassStorage was deleted.
2009-02-25 12:34:29 : <PREP> C:\UBCD4Win_3.22\UBCD4Win\PLUGIN\DriverPacks.net\MassStorage.inf was deleted.
2009-02-25 12:34:29 : <PREP> C:\UBCD4Win_3.22\UBCD4Win\PLUGIN\DriverPacks.net\MassStorage.sif was deleted.
2009-02-25 12:34:29 : <PREP> MassStorage.inf header info written.
2009-02-25 12:34:53 : <PREP> Extracted DriverPack MassStorage to a temporary working directory.
2009-02-25 12:34:53 : <PREP> C:\UBCD4Win_3.22\UBCD4Win\plugin\DriverPacks.net\BASE\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2009-02-25 12:35:21 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2009-02-25 12:35:21 : <SLIP> C:\UBCD4Win_3.22\UBCD4Win\plugin\DriverPacks.net\BASE\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2009-02-25 12:35:23 : <SLIP> Processing the files now. This may take a minute.
2009-02-25 12:36:00 : <SLIP> Copied DriverPack MassStorage text mode driver files to BartPE Plugin folder.
2009-02-25 12:36:00 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2009-02-25 12:36:10 : <SLIP> Updated the MassStorage.ini [SetValue] sections to support DP MassStorage text mode drivers.
2009-02-25 12:36:10 : <SLIP> MassStorage.inf header info written.
2009-02-25 12:36:10 : <SLIP> Saved settings!
2009-02-25 12:36:12 : <SLIP> Slipstream finished in 1 minutes and 44 seconds.
2009-02-25 12:36:25 : <CLNP> Temporary working directory successfully deleted.
2009-02-25 12:36:25 : Program terminated.


------>DPs_BASE.ini


[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\UBCD4Win_3.22\UBCD4Win\PLUGIN"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage	= "no"
DP_MassStorage_textmode = "yes"

Thank you

Edoardo

Go to forum: DriverPack Mass Storage