26 Reply by BAM

(102 replies, posted in DriverPack Mass Storage)

Hi Bashrat, here í am again.

Hopefully can help till it all works out well this time..

This time? yes.. i come back again at my first post were this thread started with.
It's not solved for yet for me.

I put down a clean winXP (UK), slipstreamed SP2, and used all the latest (of today) DP's.
burned the cd and it won't recognise the drives correctly!
Exactly like the first post.

Is it possible that i can give it a try with the drivers that were used in DPmassstorage v5.0.5.2 !?
Let's say like a special edition DPmasstorage with that config so i can test it on my system with those oldies included.

Still suspect something changed with the newer one's from sillicon.
just a thought of me..

EDIT: sorry! didn't read that well, same thoughts from the others :-)

Go to forum: DriverPack Mass Storage

27 Reply by BAM

(1 replies, posted in DriverPack Mass Storage)

I read that it is related to the Nvidia stuff, but my Silicon Image SiI 3112 SATARaid Controller does suffer from exact the same non recognised hdd's..

Go to forum: DriverPack Mass Storage

28 Reply by BAM

(102 replies, posted in DriverPack Mass Storage)

Update;
I saw the post from VoYaGeRTM1977 and downloaded the new drivers.
Then i try'd to compare things/files, but then thought about integrate them with Nlite on top of my latest (not working!) XPcd  with the driverpacks allready included. I mentioned in my first post the not recognised partitions/hdd drives.

Like what the.. let's try!

And that works flawless, it recognised my current config like the old driverpack in textmode.
I skipped out with the F3 and didn't do an actual install, but hoped it could bring some life in my problem here wink

I could try to incorporate them in the latest driverpac / my XPCD to test, but i'm much too long out of it to "just do so".. (shame)

Any help with that, or just an answer to hold on untill a fix comes around would be appreciated!

@razormoon
Perhaps give that a try also, maybe it works for you 2!?

Go to forum: DriverPack Mass Storage

29 Topic by BAM

(102 replies, posted in DriverPack Mass Storage)

Hi Bashrat, long time not heard of me!
Was a bit busy smile
Nice to see that you're still doing a very nice job over here.

Ontopic:

Now i thought to make a new UA XPcd with the latest drivers because my system had a few "bugs".
All the current available driverpacks used.

I'm unable to get my harddrives recognised properly during text mode setup!
Just plain XPsp2 with ONLY driverpacks doesn't even work in any way or settings through the base pack. (method1 / 2)
It only will show two Sata hdd's without any existing partitions or raid configuration on it. (current config like: C:\ , D:\ etc..)

It says that they have an unrecognised filesystem.. When i use my old cd with basepack v5.0.5.2 it will show flawlessly what the current config is.
I suspect that there is something not okay with the latest drivers.

Someone over here who can confirm this? (or prove the opposite ofcourse)
Really need to get it running, try'd all the ways i could think of.
Has been too long ago to jump fully into the files sad

I'm willing to test things if neccesary, thnx in advance.

my HWid:

=========== 
PCI devices 
=========== 
 
 
PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02\4&3B1D9AB8&0&5840: Silicon Image SiI 3112 SATARaid Controller
PCI\VEN_10DE&DEV_0060&SUBSYS_00000000&REV_A4\3&13C0B0C5&0&08: PCI standard ISA bridge
PCI\VEN_10DE&DEV_0064&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&09: NVIDIA nForce PCI System Management
PCI\VEN_10DE&DEV_0065&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&48: NVIDIA nForce2 ATA Controller
PCI\VEN_10DE&DEV_0066&SUBSYS_80A71043&REV_A1\3&13C0B0C5&0&20: NVIDIA nForce Networking Controller
PCI\VEN_10DE&DEV_0067&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&10: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0067&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&11: Standard OpenHCD USB Host Controller
PCI\VEN_10DE&DEV_0068&SUBSYS_0C111043&REV_A4\3&13C0B0C5&0&12: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10DE&DEV_006A&SUBSYS_80951043&REV_A1\3&13C0B0C5&0&30: NVIDIA(R) nForce(TM) Audio Codec Interface
PCI\VEN_10DE&DEV_006B&SUBSYS_0C111043&REV_A2\3&13C0B0C5&0&28: NVIDIA(R) nForce(TM) MCP Audio Processing Unit
PCI\VEN_10DE&DEV_006C&SUBSYS_00000000&REV_A3\3&13C0B0C5&0&40: PCI standard PCI-to-PCI bridge
PCI\VEN_10DE&DEV_01E0&SUBSYS_00000000&REV_C1\3&13C0B0C5&0&00: PCI standard host CPU bridge
PCI\VEN_10DE&DEV_01E8&SUBSYS_00000000&REV_C1\3&13C0B0C5&0&F0: NVIDIA nForce2 AGP Host to PCI Bridge
PCI\VEN_10DE&DEV_01EB&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&01: NVIDIA nForce2 Ultra 400 Memory Controller
PCI\VEN_10DE&DEV_01EC&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&04: NVIDIA nForce2 Memory Controller
PCI\VEN_10DE&DEV_01ED&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&03: NVIDIA nForce2 Memory Controller
PCI\VEN_10DE&DEV_01EE&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&02: NVIDIA nForce2 Memory Controller
PCI\VEN_10DE&DEV_01EF&SUBSYS_80AC1043&REV_C1\3&13C0B0C5&0&05: NVIDIA nForce2 Memory Controller
PCI\VEN_10DE&DEV_0343&SUBSYS_81711043&REV_A1\4&102AC5BC&0&00F0: NVIDIA GeForce FX 5700LE
PCI\VEN_11AB&DEV_4320&SUBSYS_811A1043&REV_13\4&3B1D9AB8&0&2040: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller
PCI\VEN_8086&DEV_1040&SUBSYS_10008086&REV_00\4&3B1D9AB8&0&4840: Intel(R) 536EP Modem
21 matching device(s) found.

Go to forum: DriverPack Mass Storage