DriverPacks.net Forum - Triple PhysX start w/choose-language-dialog

Re: Triple PhysX start w/choose-language-dialog

2009-02-08T17:08:54Z

mr_smartepants wrote:

LOL, you're confused. But it's OK.
That PhysX installer was built by dumpydooby (in RogueSpear's style). The DriverPacks Finisher doesn't care if the installers are switchless or require 15 switches, we just load those into the .ini.
To be honest, I haven't played that much with dumpydooby's PhysX installer. I wish I could make my own, but I just can't find the time to learn that awesome method. I hope I will soon.
If you want to try that installer, just replace my PhysX installer with dumpydooby's and change an entry in the DriverPack Graphics A .ini N1 section from this:
exc_2_command1  = "%DPSROOT%\D\G\N1\PhysX.exe /qb"
to this:
exc_2_command1  = "%DPSROOT%\D\G\N1\PhysX.exe -ai"
Easy!

wow very easy. I'll test it now.
Also I was confused who created the physx installer. Sorry dumpydooby.

Re: Triple PhysX start w/choose-language-dialog

2009-02-08T16:58:00Z

LOL, you're confused. But it's OK.
That PhysX installer was built by dumpydooby (in RogueSpear's style). The DriverPacks Finisher doesn't care if the installers are switchless or require 15 switches, we just load those into the .ini.

To be honest, I haven't played that much with dumpydooby's PhysX installer. I wish I could make my own, but I just can't find the time to learn that awesome method. I hope I will soon.

If you want to try that installer, just replace my PhysX installer with dumpydooby's and change an entry in the DriverPack Graphics A .ini N1 section from this:

exc_2_command1  = "%DPSROOT%\D\G\N1\PhysX.exe /qb"

to this:

exc_2_command1  = "%DPSROOT%\D\G\N1\PhysX.exe -ai"

Easy!

Re: Triple PhysX start w/choose-language-dialog

2009-02-08T14:18:51Z

dumpydooby wrote:

bfc_xxx wrote:
mr_smartepants wrote:
PhysX by default is English. If you install in a non-english OS, you'll get prompted for language.
Sorry, not my installer. I'll poke around in there and see if I can see anything though.
Is it possible to use roguespear's installer to solve the language selection problem with physx?
What do you mean by this? I posted a PhysX installer a couple weeks ago and noted that it follows "RogueSpear's multimode installer" standard. Is that what you're talking about? Or did he actually make one of his own as well?
edit-
Here is the one I posted: http://xp.xpdnc.org/PhysX.exe
That should follow the same [ -ai / -ai1 ] syntax that RogueSpear has in his installers. I don't have an nVidia card to test this, but if you have any issues, let me know and I'll see what I can do it.

The problem is that roguespear's installer needs the -ai or -ai1 switch and is not complete switchless to create a driverpack.
If I'm not wrong we need a complete switchless installer to build a driverpack like that.
I was thinking that we could use roguespear's multimode installer and SFXmaker to create a complete switchless installer and then build a driverpack.
Is that possible mr_smartepants??

Re: Triple PhysX start w/choose-language-dialog

2009-01-27T19:18:08Z

I'm really going to have to get off my ass and learn how to build those multimode installers! They're awesome!

Re: Triple PhysX start w/choose-language-dialog

2009-01-27T18:27:49Z

bfc_xxx wrote:

mr_smartepants wrote:
PhysX by default is English. If you install in a non-english OS, you'll get prompted for language.
Sorry, not my installer. I'll poke around in there and see if I can see anything though.
Is it possible to use roguespear's installer to solve the language selection problem with physx?

What do you mean by this? I posted a PhysX installer a couple weeks ago and noted that it follows "RogueSpear's multimode installer" standard. Is that what you're talking about? Or did he actually make one of his own as well?

edit-
Here is the one I posted: http://xp.xpdnc.org/PhysX.exe

That should follow the same [ -ai / -ai1 ] syntax that RogueSpear has in his installers. I don't have an nVidia card to test this, but if you have any issues, let me know and I'll see what I can do it.

Re: Triple PhysX start w/choose-language-dialog

2009-01-24T13:45:47Z

mr_smartepants wrote:

I don't know. RogueSpear knows a h*ll of a lot more about switchless installers than I ever will!

If we use the roguespear's installer with -ai or -ai1 switch then the physx is installed correctly without asking language and the file size is quite smaller.
The problem is I don't know how to repack the installer or create a sfx archive that calls the ai or ai1 switch when runs the physx.exe

Re: Triple PhysX start w/choose-language-dialog

2009-01-23T20:53:14Z

I don't know. RogueSpear knows a h*ll of a lot more about switchless installers than I ever will!

Re: Triple PhysX start w/choose-language-dialog

2009-01-23T11:44:14Z

mr_smartepants wrote:

PhysX by default is English. If you install in a non-english OS, you'll get prompted for language.
Sorry, not my installer. I'll poke around in there and see if I can see anything though.

Is it possible to use roguespear's installer to solve the language selection problem with physx?

Re: Triple PhysX start w/choose-language-dialog

2009-01-19T21:52:04Z

I indeed removed N5, packed in N1 latest NV drivers (181.20) and in PhysX - latest v.9. It works seamlessly now (nomatter once or twice PhysX started).

Re: Triple PhysX start w/choose-language-dialog

2009-01-19T20:01:09Z

Well, this problem is solved in the latest nightly! N5\ is removed, thereby resolving the false trigger.
It wasn't a bug. But your HWID was listed in both N1 & N5, that's why.
I'll look into the available PhysX switches.

Oh, and PhysX should never be installing during presetup (between txtsetup and GUIsetup). I have seen a PhysX progressbar during T-34 of GUIsetup, but it doesn't install at that time.

Re: Triple PhysX start w/choose-language-dialog

2009-01-19T18:14:43Z

OverFlow wrote:

maybe you have three different versions of physx in your 3rd party DriverPack folder?
what is unpacker?

Nope, just single. As I can see in logs, finisher starts physx for N1 and N5!
2009-01-19 03:03:51 : [0] => N5
2009-01-19 03:03:51 : [1] => %DPSROOT%\D\G\N1\PhysX.exe|||%SystemRoot%\system32\drivers\nv4_mini.sys
2009-01-19 03:03:51 : [2] => 0
2009-01-19 03:03:51 : [3] => 0
2009-01-19 03:03:51 : [4] => %DPSROOT%\D\G\N5\nv4_disp.inf
2009-01-19 03:03:51 : [5] => 0
2009-01-19 03:03:51 : [6] => %DPSROOT%\D\G\N1\PhysX.exe /qb

I suspect it mabe bug.

I named "unpacker" the first phase, BEFORE finisher. It started PhysX too.

And... Old PhysX (v.8.xxx) erroneous ignores /qb option. New, version 9, admit it. Anyway, I can't admit triple start.

Re: Triple PhysX start w/choose-language-dialog

2009-01-19T15:56:47Z

maybe you have three different versions of physx in your 3rd party DriverPack folder?

what is unpacker?

Re: Triple PhysX start w/choose-language-dialog

2009-01-19T11:12:12Z

Can you post your DPsFnshr.log so I can see what's triggering the multiple installs?
PhysX by default is English. If you install in a non-english OS, you'll get prompted for language.
Sorry, not my installer. I'll poke around in there and see if I can see anything though.

Welcome to DriverPacks.net!
Please take the time to read this post before you respond.

Triple PhysX start w/choose-language-dialog

2009-01-19T09:57:29Z

I have some annoyance., once with unpacker and twice with finisher.
1. Why THREE TIMES?
2. Why MUST I choose language? Mabe 'coz of my codepage (not english)?

Versions are XP latest (at present).