hello every one. I can help but think that some one some were have figer this problem out. All you guys are so smart on here so I thought I would ask if any one figer it out yet. I am also needing the same drivers. I have a gatway m-150xt Laptop that I also went from crapy vista to XP pro. I have tried everything on here that you all have sugested and I get an err code, BUT my HDMI audio dose work for the ATI. my laptop is
Feature Description
Processor Supported: Intel® Merom Core Duo and Merom-Lite CPUs
Package: Socket-P, uFCPGA
FSB: 533/667/800 MHz
Thermal: Digital Thermal Sensor Core logic North Bridge: Intel® PM965
South Bridge: Intel® ICH8M
Memory Base: 0 MB on motherboard
Sockets: 2 SO-DIMM sockets, both user accessible
Type: DDR2 667 MHz SO-DIMMs
Channel: Dual-channel
Maximum: 4 GB
Thermal: EXTTS Implementation
Graphics Controller: ATI M74M
Bus: PCIe x16
Memory options: DMVT 3.0
Display interface: 2-CH LVDS
TV-out: HDMI from GFX IC
Brightness Control: PWM, 8-Levels
Communications FAX/Modem: Agere Delphi AM3 (MDC 1.5 form factor)
Networking: Realtek RTL8101E
Integrated wireless: Mini-card form factor
Storage Hard drive: SATA I/F, Direct connect to motherboard
Optical drive: PATA I/F, Direct connect to motherboard
Key asics Audio: SigmaTel STAC9205
KBC: Winbond W83L951D
HDMI: HDMI block integrated in GFX
BIOS: ATMEL AT26DF081A-SU
ExpressCard: PCIe x 1, USB x 1 from ICH8M
1394a:
Memory reader (7 in 1): RTS5158
AC Adapter receptical: 90 watt
Security Anti-theft: CompuTrace Persistence Module in BIOS
BIOS: POST password, Hard drive password
BIOS specifications ACPI 2.0, WFM 2.0, SMBIOS 2.4, USB floppy disk drive boot support
PXE boot, WoLOM (Wake-on LAN on Motherboard)
Expansion Mini-card: 2 Mini-card sockets
Docking: No Support
Power management. Graphics power management (UMA):
Vari-Bright
Dynamic Lane Switching
Auto Configure for D3D Applications
Active HW for Dynamic Clock / Voltage Modes
Storage: Intel® Matrix Storage Technology Driver
Processor: Support for C0 to C4 states, Support for C1E to C4E
Memory: DDR bus throttling via thermal sensor
Battery charge: Standard 0.7C charge scheme
I/O ports Three - USB 2.0 ports
One - VGA port
One - ExpressCard Type 54
One - IEEE 1394 (4-pin)
7-in-1 Memory card reader
Microphone jack
Headphone jack
RJ-45 port
RJ-11 port
Power input
Internal connectors (cable only) Keyboard: Keyboard matrix connected to KBC via motherboard
Multi-purpose Pick Board: Touchpad Pick Button Board to support L and R Pick Buttons, Optional FPR, Audio Jacks & Status LEDs
Power Button: Input to KBC
]]>
Still have a yellow ! mark on the IDT High Definition Audio CODEC.