251

(24 replies, posted in DriverPack Graphics)

Well I tried one more thing and I failed at that also lol... I tried to make my own 3rd party pack with the drivers that I backedup from a previously corrected install but no luck.. in fact it's even worse since it's now VGA... I got the following error in the setup log:


Error:
c:\d\3\j\d630\vid\NvCplSetupInt.exe was not copied to D:\NvCplSetupInt.exe because of the following error:
The system cannot find message text for message number 0xe0000233 in the message file for syssetup.dll.

252

(107 replies, posted in 3rd Party DriverPacks)

I just tried to create a 3rd party pack with the ALPS Touchpad driver for the D630 and it didn't work either... I obvioulsy don't know how to make a pack correctly lol... but I can't figure why none of the packs install this

253

(24 replies, posted in DriverPack Graphics)

I checked the setupapi.log and the same dll failed: nvcuvenc.dll but nothing else seems different...

the corrections we made are:

HKLM,"Software\Microsoft\Windows\CurrentVersion\Run",NvCplDaemon,%REG_SZ%,"RUNDLL32.EXE %11%\NvCpl.dll,NvStartup"
HKLM,"Software\Microsoft\Windows\CurrentVersion\Run",NVHotkey,,"rundll32.exe %11%\nvHotkey.dll,Start"

254

(107 replies, posted in 3rd Party DriverPacks)

Dell D400 & D630 ALPS Touchpad Problem

I have now run the latest driverpack along with the DP_HID_wnt5_x86-32_90204 and on both laptops the mouse pad defaults to MS device instead of an ALPS.  I have been installing the driver post install but since I am experimenting now with other issues I thought I would bring it to the forum for feedback.

D400

ACPI\PNP0F13\4&61F3B4B&0                                    : Alps Touch Pad

DRIVER:
http://support.dell.com/support/downloa … eid=149404


D630

ACPI\PNP0F13\4&2F94427B&0                                   : Dell Touchpad

DRIVER:
http://support.dell.com/support/downloa … eid=223709

Any help would be appreciated

255

(24 replies, posted in DriverPack Graphics)

Awesome find on your part... I will make the corrections now and then try it and get right back...

EDIT:

The install isn't finished yet but unfortunately it failed again... but I got some sleep so I can provide more accurate info :-)

the message first pops up during the GUI - installing devices - with 34 minutes left to complete. I hit OK and am watching the rest of the install. It definitely happens before the network install. I will doublke check that I made the corrections properly and report back when it's done.

Let me know if their is anything you want me to check....

PS- below is the info of the Dell D400 which installed fine:

=========== 
PCI Devices 
=========== 
PCI\VEN_104C&DEV_802B&SUBSYS_01391028&REV_00\4&39A85202&0&0AF0: Texas Instruments OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_104C&DEV_8204&SUBSYS_01391028&REV_00\4&39A85202&0&0BF0: TI UltraMedia Firmware Loader Device
PCI\VEN_104C&DEV_AC47&SUBSYS_01391028&REV_01\4&39A85202&0&08F0: Texas Instruments PCI7510 CardBus Controller
PCI\VEN_104C&DEV_AC4A&SUBSYS_01391028&REV_01\4&39A85202&0&09F0: Texas Instruments CardBus Controller with SmartCard
PCI\VEN_14E4&DEV_165D&SUBSYS_865D1028&REV_01\4&39A85202&0&00F0: Broadcom 570x Gigabit Integrated Controller
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_81\3&61AAA01&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_24C2&SUBSYS_45418086&REV_01\3&61AAA01&0&E8 : Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
PCI\VEN_8086&DEV_24C4&SUBSYS_45418086&REV_01\3&61AAA01&0&E9 : Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
PCI\VEN_8086&DEV_24C5&SUBSYS_01391028&REV_01\3&61AAA01&0&FD : SigmaTel C-Major Audio
PCI\VEN_8086&DEV_24C6&SUBSYS_542214F1&REV_01\3&61AAA01&0&FE : Conexant D480 MDC V.92 Modem
PCI\VEN_8086&DEV_24C7&SUBSYS_45418086&REV_01\3&61AAA01&0&EA : Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
PCI\VEN_8086&DEV_24CA&SUBSYS_45418086&REV_01\3&61AAA01&0&F9 : Intel(R) 82801DBM Ultra ATA Storage Controller - 24CA
PCI\VEN_8086&DEV_24CC&SUBSYS_00000000&REV_01\3&61AAA01&0&F8 : Intel(R) 82801DBM LPC Interface Controller - 24CC 
PCI\VEN_8086&DEV_24CD&SUBSYS_01391028&REV_01\3&61AAA01&0&EF : Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
PCI\VEN_8086&DEV_3580&SUBSYS_00000000&REV_02\3&61AAA01&0&00 : Intel(R) 82852/82855 GM/GME/PM/GMV to Processor I/O Controller - 3580
PCI\VEN_8086&DEV_3582&SUBSYS_01391028&REV_02\3&61AAA01&0&10 : Intel(R) 82852/82855 GM/GME Graphics Controller
PCI\VEN_8086&DEV_3582&SUBSYS_01391028&REV_02\3&61AAA01&0&11 : Intel(R) 82852/82855 GM/GME Graphics Controller
PCI\VEN_8086&DEV_3584&SUBSYS_01391028&REV_02\3&61AAA01&0&01 : Intel(R) 82852/82855 GM/GME/PM/GMV to Processor I/O Controller - 3584
PCI\VEN_8086&DEV_3585&SUBSYS_01391028&REV_02\3&61AAA01&0&03 : Intel(R) 82852/82855 GM/GME/PM/GMV to Processor I/O Controller - 3585
PCI\VEN_8086&DEV_4220&SUBSYS_27218086&REV_05\4&39A85202&0&18F0: Intel(R) PRO/Wireless 2200BG Network Connection
20 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&1B96DD0A&0                                   : USB Root Hub
USB\ROOT_HUB\4&23036E4B&0                                   : USB Root Hub
USB\ROOT_HUB\4&A2AFF59&0                                    : USB Root Hub
USB\ROOT_HUB20\4&1726381F&0                                 : USB Root Hub
4 matching device(s) found.
 
============= 
Input Devices 
============= 
No matching devices found.
 
============ 
ACPI Devices 
============ 
ACPI\ACPI0003\2&DABA3FF&0                                   : Microsoft AC Adapter
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_13\_0                : Intel(R) Pentium(R) M processor 1.80GHz
ACPI\PNP0000\4&61F3B4B&0                                    : Programmable interrupt controller
ACPI\PNP0100\4&61F3B4B&0                                    : System timer
ACPI\PNP0200\4&61F3B4B&0                                    : Direct memory access controller
ACPI\PNP0303\4&61F3B4B&0                                    : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0401\4&61F3B4B&0                                    : ECP Printer Port (LPT1)
ACPI\PNP0501\4&61F3B4B&0                                    : Communications Port (COM1)
ACPI\PNP0800\4&61F3B4B&0                                    : System speaker
ACPI\PNP0A03\2&DABA3FF&0                                    : PCI bus
ACPI\PNP0B00\4&61F3B4B&0                                    : System CMOS/real time clock
ACPI\PNP0C01\1                                              : System board
ACPI\PNP0C01\2                                              : System board
ACPI\PNP0C01\3                                              : System board
ACPI\PNP0C01\4                                              : System board
ACPI\PNP0C01\7                                              : System board
ACPI\PNP0C04\4&61F3B4B&0                                    : Numeric data processor
ACPI\PNP0C0A\1                                              : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNP0C0D\2&DABA3FF&0                                    : ACPI Lid
ACPI\PNP0C0E\2&DABA3FF&0                                    : ACPI Sleep Button
ACPI\PNP0F13\4&61F3B4B&0                                    : Alps Touch Pad
ACPI\THERMALZONE\THM_                                       : ACPI Thermal Zone
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : Advanced Configuration and Power Interface (ACPI) PC
25 matching device(s) found.
 
============ 
 HDA Audio 
============ 
No matching devices found.
 
============ 
RAID Devices 
============ 
PCI\VEN_8086&DEV_24CA&SUBSYS_45418086&REV_01\3&61AAA01&0&F9
    Name: Intel(R) 82801DBM Ultra ATA Storage Controller - 24CA
    Hardware ID's:
        PCI\VEN_8086&DEV_24CA&SUBSYS_45418086&REV_01
        PCI\VEN_8086&DEV_24CA&SUBSYS_45418086
        PCI\VEN_8086&DEV_24CA&CC_01018A
        PCI\VEN_8086&DEV_24CA&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_24CA&REV_01
        PCI\VEN_8086&DEV_24CA
        PCI\VEN_8086&CC_01018A
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018A
        PCI\CC_0101
1 matching device(s) found.

256

(24 replies, posted in DriverPack Graphics)

In all fairness I may be mistaken with the timing of the error because this beat me up pretty good and I was tired... it also took an extremely long time during each install test and I am doing it on a new drive in my working laptop so the time issue and just watching the install is a pain for me...

my XPSP3 is a slipstream that seems to work perfect on all my VM testing before I do the DriverPack and even wih the driver pack it installed perfect on a D400 so I'm not sure what to look for. Should I try to make a custom pack with just the video driver and see what happens?

This is my RunOnceEX: (the Dell items only get added if I include a custom dell folder and the same for all the other "if exist" items)

FOR %%i IN (D E F G H I J K L M N O P Q R S T U V W X Y Z) DO IF EXIST %%i:\CD.txt SET CDROM=%%i:

SET KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx

REG ADD %KEY% /V TITLE /D "Installing" /f

REG ADD %KEY%\010 /VE /D "Copy_CD" /f
REG ADD %KEY%\010 /V 1 /D "%systemdrive%\install\verifyVHD.cmd" /f
REG ADD %KEY%\020 /V 2 /D "%systemdrive%\install\Copy_CD.cmd" /f

REG ADD %KEY%\200 /VE /D "Reg_Tweaks" /f
REG ADD %KEY%\200 /V 1 /D "%systemdrive%\install\tweaks.cmd" /f

REG ADD %KEY%\210 /VE /D "Lan_Icons" /f
REG ADD %KEY%\210 /V 1 /D "%systemdrive%\install\show_lan_icon.cmd" /f

REG ADD %KEY%\215 /VE /D "DOT_NET" /f
REG ADD %KEY%\215 /V 1 /D "%CDROM%\DOTNET\dotnet.cmd" /f

REG ADD %KEY%\220 /VE /D "SpyBotSD" /f
REG ADD %KEY%\220 /V 1 /D "%systemdrive%\install\spybot\SDupdate.cmd" /f
REG ADD %KEY%\220 /V 2 /D "%systemdrive%\install\spybot\SDimmunize.cmd" /f
REG ADD %KEY%\220 /V 3 /D "%systemdrive%\install\spybot\netlogon.bat" /f
REG ADD %KEY%\220 /V 4 /D "%systemdrive%\install\spybot\spybottasks.bat" /f

REG ADD %KEY%\225 /VE /D "QCheck" /f
REG ADD %KEY%\225 /V 1 /D "%systemdrive%\install\qcheck3\qcheck.cmd" /f

REG ADD %KEY%\230 /VE /D "BelArc" /f
REG ADD %KEY%\230 /V 1 /D "%systemdrive%\install\belarc\belarc.cmd" /f
REG ADD %KEY%\230 /V 2 /D "%systemdrive%\install\belarc\advisor.cmd" /f
REG ADD %KEY%\230 /V 3 /D "%systemdrive%\install\belarc\enter.vbs" /f
REG ADD %KEY%\230 /V 4 /D "ping -n 90 127.0.0.1>nul" /f
REG ADD %KEY%\230 /V 5 /D "%systemdrive%\install\belarc\taskkill.cmd" /f


IF EXIST %CDROM%\DELL\dell.txt REG ADD %KEY%\300 /VE /D "DELL" /f
IF EXIST %CDROM%\DELL\dell_copy.cmd REG ADD %KEY%\300 /V 1 /D "%CDROM%\DELL\dell_copy.cmd" /f
IF EXIST %CDROM%\DELL\NSS\Dell_NSS.cmd REG ADD %KEY%\300 /V 2 /D "%systemdrive%\DELL\install\NSS\Dell_NSS.cmd" /f
IF EXIST %CDROM%\DELL\Quickset\Dell_Quickset.cmd REG ADD %KEY%\300 /V 3 /D "%systemdrive%\DELL\install\Quickset\Dell_Quickset.cmd" /f
IF EXIST %CDROM%\DELL\ALPS\Dell_ALPS.cmd REG ADD %KEY%\300 /V 4 /D "%systemdrive%\DELL\install\ALPS\Dell_ALPS.cmd" /f
IF EXIST %CDROM%\DELL\Knowles\Dell_Knowles.cmd REG ADD %KEY%\300 /V 5 /D "%CDROM%\DELL\Knowles\Dell_Knowles.cmd" /f
IF EXIST %CDROM%\DELL\WAVE\Dell_WAVE.cmd REG ADD %KEY%\300 /V 6 /D "%systemdrive%\DELL\install\WAVE\Dell_WAVE.cmd" /f

IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\600 /VE /D "Office_2003" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\600 /V 1 /D "%CDROM%\Software\O2K3SP3\O2K3SP3.cmd" /f

IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\610 /VE /D "Office_OGA" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\610 /V 1 /D "%CDROM%\Software\O2K3SP3\OGA\OGA.exe" /f

IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\620 /VE /D "Office_2003_PSTBackup" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\620 /V 1 /D "%CDROM%\Software\Outlook\PSTBackup\PSTBackup.cmd" /f

IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\630 /VE /D "OutlookTools" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\630 /V 1 /D "%CDROM%\Software\Outlook\OutlookTools\outlooktoolssetup.cmd" /f

IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\640 /VE /D "Outlook_Duplicates_Remover" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\640 /V 1 /D "%CDROM%\Software\Outlook\ODIR\odir.cmd" /f

IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\650 /VE /D "Outlook_Attachements_Remover" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\650 /V 1 /D "%CDROM%\Software\Outlook\OAR\oar.cmd" /f

IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\660 /VE /D "Office_File_Format_Converters" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\660 /V 1 /D "%CDROM%\Software\O2K3SP3\FFC\ffcsetup.cmd" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\660 /V 2 /D "%CDROM%\Software\O2K3SP3\FFC\ffcSP2.cmd" /f
IF EXIST %CDROM%\Software\O2K3SP3\O2K3SP3.cmd REG ADD %KEY%\660 /V 3 /D "%CDROM%\Software\O2K3SP3\FFC\ffchotfix.cmd" /f

IF EXIST %CDROM%\Hotfix\hotfix.cmd REG ADD %KEY%\800 /VE /D "Hotfixes" /f
IF EXIST %CDROM%\Hotfix\hotfix.cmd REG ADD %KEY%\800 /V 1 /D "%CDROM%\hotfix\hotfix.cmd" /f

IF EXIST %CDROM%\Software\ASVSE\SetupVSE.Exe REG ADD %KEY%\900 /VE /D "McAfee" /f
IF EXIST %CDROM%\Software\ASVSE\SetupVSE.Exe REG ADD %KEY%\900 /V 1 /D "%CDROM%\Software\ASVSE\SetupVSE.Exe" /f

IF EXIST %CDROM%\Software\SAV\sav.cmd REG ADD %KEY%\910 /VE /D "Symantec AV" /f
IF EXIST %CDROM%\Software\SAV\sav.cmd REG ADD %KEY%\910 /V 1 /D "%CDROM%\Software\SAV\savreg.cmd" /f
IF EXIST %CDROM%\Software\SAV\sav.cmd REG ADD %KEY%\910 /V 2 /D "%CDROM%\Software\SAV\sav.cmd" /f
IF EXIST %CDROM%\Software\SAV\sav.cmd REG ADD %KEY%\910 /V 3 /D "%CDROM%\Software\SAV\sav_update.cmd" /f

REG ADD %KEY%\980 /VE /D "logonui_fix" /f
REG ADD %KEY%\980 /V 1 /D "%systemdrive%\install\logonui.cmd" /f

REG ADD %KEY%\981 /VE /D "WMP" /f
REG ADD %KEY%\981 /V 1 /D "%systemdrive%\install\WMP\copy_wmpinf.cmd" /f

REG ADD %KEY%\985 /VE /D "PageFile" /f
REG ADD %KEY%\985 /V 1 /D "%systemdrive%\install\PageFile\move_pagefile.cmd" /f
REG ADD %KEY%\985 /V 2 /D "%systemdrive%\pagefile.vbs" /f

REG ADD %KEY%\990 /VE /D "CleanUp" /f
REG ADD %KEY%\990 /V 1 /D "%systemdrive%\install\cleanup.cmd" /f

EXIT

257

(24 replies, posted in DriverPack Graphics)

I just downloaded 185.85 from nVidia and after re-installing the error is gone and the nvhotkey.dll is in the system32 folder...

258

(24 replies, posted in DriverPack Graphics)

I'm new to troubleshooting this so thanks for the tips...

not sure how to check the hash marks yet but I'll figure it out and report back

I believe the error shows up at about runonceex 215 after my .net install... which really confuses me since I thought the drivers were done at 987

I searched the system for nvhotkey.dll and its not present

I searched the setup and found the info below: (I registered nvcuvenc.dll)

mr_smartepants wrote:

That Quadro HWID is directly supported by DriverPack Graphics A 9.06 and the nvdm.inf is untouched from nvidia 185.85. 
Odd.
Have you checked the hashes on the DriverPacks?
At what point in setup do you get the nvhotkey.dll failure?
Have you looked in setupapi.log for the specific error? (search for VEN_10DE&DEV_042B)

[2009/07/13 21:16:17 900.1205 Driver Install]
#-019 Searching for hardware ID(s): pci\ven_10de&dev_042b&subsys_01f91028&rev_a1,pci\ven_10de&dev_042b&subsys_01f91028,pci\ven_10de&dev_042b&cc_030000,pci\ven_10de&dev_042b&cc_0300
#-018 Searching for compatible ID(s): pci\ven_10de&dev_042b&rev_a1,pci\ven_10de&dev_042b,pci\ven_10de&cc_030000,pci\ven_10de&cc_0300,pci\ven_10de,pci\cc_030000,pci\cc_0300
#-198 Command line processed: "C:\WINDOWS\system32\setup.exe"  -newsetup
#I022 Found "PCI\VEN_10DE&DEV_042B" in C:\D\G\N1\nvdm_dps.inf; Device: "NVIDIA Quadro NVS 135M"; Driver: "NVIDIA Quadro NVS 135M"; Provider: "NVIDIA"; Mfg: "NVIDIA"; Section name: "Section001".
#I087 Driver node not trusted, rank changed from 0x00002001 to 0x0000e001.
#I023 Actual install section: [Section001]. Rank: 0x0000e001. Effective driver date: 04/30/2009.
#I022 Found "PCI\VEN_10DE&DEV_042B&SUBSYS_01F91028" in C:\D\G\N1\nvdm.inf; Device: "NVIDIA Quadro NVS 135M"; Driver: "NVIDIA Quadro NVS 135M"; Provider: "NVIDIA"; Mfg: "NVIDIA"; Section name: "Section001".
#I087 Driver node not trusted, rank changed from 0x00000001 to 0x0000c001.
#I023 Actual install section: [Section001]. Rank: 0x0000c001. Effective driver date: 04/30/2009.
#-166 Device install function: DIF_SELECTBESTCOMPATDRV.
#I063 Selected driver installs from section [Section001] in "c:\d\g\n1\nvdm.inf".
#I320 Class GUID of device remains: {4D36E968-E325-11CE-BFC1-08002BE10318}.
#I060 Set selected driver.
#I058 Selected best compatible driver.
#-124 Doing copy-only install of "PCI\VEN_10DE&DEV_042B&SUBSYS_01F91028&REV_A1\4&15F4A1BE&0&0008".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvdm.inf" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-024 Copying file "c:\d\g\n1\NvCplSetupInt.exe" to "C:\WINDOWS\system32\NvCplSetupInt.exe".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\NvCplSetupInt.exe" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nv4_mini.sys" to "C:\WINDOWS\system32\DRIVERS\nv4_mini.sys" via temporary file "C:\WINDOWS\system32\DRIVERS\SET15E.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nv4_mini.sys" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nv4_disp.dll" to "C:\WINDOWS\system32\nv4_disp.dll" via temporary file "C:\WINDOWS\system32\SET15F.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nv4_disp.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nvapi.dll" to "C:\WINDOWS\system32\nvapi.dll" via temporary file "C:\WINDOWS\system32\SET160.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvapi.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nvcuda.dll" to "C:\WINDOWS\system32\nvcuda.dll" via temporary file "C:\WINDOWS\system32\SET161.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvcuda.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nvcuvenc.dll" to "C:\WINDOWS\system32\nvcuvenc.dll" via temporary file "C:\WINDOWS\system32\SET162.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvcuvenc.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nvcuvid.dll" to "C:\WINDOWS\system32\nvcuvid.dll" via temporary file "C:\WINDOWS\system32\SET163.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvcuvid.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nvdata.bin" to "C:\WINDOWS\system32\nvdata.bin" via temporary file "C:\WINDOWS\system32\SET164.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvdata.bin" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nvoglnt.dll" to "C:\WINDOWS\system32\nvoglnt.dll" via temporary file "C:\WINDOWS\system32\SET165.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvoglnt.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nvcod.dll" to "C:\WINDOWS\system32\nvcod.dll" via temporary file "C:\WINDOWS\system32\SET166.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvcod.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-336 Copying file "c:\d\g\n1\nvcod.dll" to "C:\WINDOWS\system32\nvcodins.dll" via temporary file "C:\WINDOWS\system32\SET167.tmp".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvcod.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-166 Device install function: DIF_REGISTER_COINSTALLERS.
#I056 Coinstallers registered.
#-148 Loading coinstaller modules for "NVIDIA Quadro NVS 135M".
#E360 An unsigned or incorrectly signed file "C:\WINDOWS\system32\nvcodins.dll" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-166 Device install function: DIF_INSTALLINTERFACES.
#-011 Installing section [Section001.Interfaces] from "c:\d\g\n1\nvdm.inf".
#I054 Interfaces installed.
#-166 Device install function: DIF_INSTALLDEVICE.
#I123 Doing full install of "PCI\VEN_10DE&DEV_042B&SUBSYS_01F91028&REV_A1\4&15F4A1BE&0&0008".
#E360 An unsigned or incorrectly signed file "c:\d\g\n1\nvdm.inf" for driver "NVIDIA Quadro NVS 135M" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#-290 Processing REGISTERDLLS section [nv_common_registerdll]. Binary: "%11%\nvcuvenc.dll", flags: 0x0001, timeout: 60s.
#E360 An unsigned or incorrectly signed file "C:\WINDOWS\system32\nvcuvenc.dll" for driver "Display adapters" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
#E127 Calling "DllRegisterServer" in OLE Control "C:\WINDOWS\system32\nvcuvenc.dll" failed. Error 0x80040154: Class not registered
#E291 Failed to register OLE server "C:\WINDOWS\system32\nvcuvenc.dll". Error 0x80040154: Class not registered
#I121 Device install of "PCI\VEN_10DE&DEV_042B&SUBSYS_01F91028&REV_A1\4&15F4A1BE&0&0008" finished successfully.




[2009/07/13 21:47:47 1860.293 Driver Install]
#-019 Searching for hardware ID(s): pci\ven_10de&dev_042b&subsys_01f91028&rev_a1,pci\ven_10de&dev_042b&subsys_01f91028,pci\ven_10de&dev_042b&cc_030000,pci\ven_10de&dev_042b&cc_0300
#-018 Searching for compatible ID(s): pci\ven_10de&dev_042b&rev_a1,pci\ven_10de&dev_042b,pci\ven_10de&cc_030000,pci\ven_10de&cc_0300,pci\ven_10de,pci\cc_030000,pci\cc_0300

259

(24 replies, posted in DriverPack Graphics)

Since I seem to have multiple problems with this install I'm not sure exactly where to post but this seems to be the mose relavent:

I am currently working on a Dell D400 and D630... I just used my latest slipstream which was integrated with the latest driver packs including 3rd party. The D400 went perfect ( I use Runoncex @ 987 and always run the ALPS seperately). When I tried the D630 I get a nvhotkey.dll failure along with a fingerprint software error... I am also completely confused about when and how to run the WAVE and TPM items.

I have spent a day on this and it's humbling me big time lol so any help would be appreciated...

Here are the HWID's:

=========== 
PCI Devices 
=========== 
PCI\VEN_10DE&DEV_042B&SUBSYS_01F91028&REV_A1\4&15F4A1BE&0&0008: NVIDIA Quadro NVS 135M
PCI\VEN_1217&DEV_00F7&SUBSYS_01F91028&REV_02\4&28D6DE3B&0&0CF0: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_1217&DEV_7135&SUBSYS_01F91028&REV_21\4&28D6DE3B&0&08F0: O2Micro OZ711EZ1 MemoryCardBus Controller
PCI\VEN_14E4&DEV_1673&SUBSYS_01F91028&REV_02\4&1E93A591&0&00E5: Broadcom NetXtreme 57xx Gigabit Controller
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_F2\3&61AAA01&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_2815&SUBSYS_00000000&REV_02\3&61AAA01&0&F8 : Intel(R) ICH8M LPC Interface Controller - 2815
PCI\VEN_8086&DEV_2828&SUBSYS_01F91028&REV_02\3&61AAA01&0&FA : Intel(R) ICH8M 3 port Serial ATA Storage Controller - 2828
PCI\VEN_8086&DEV_2830&SUBSYS_01F91028&REV_02\3&61AAA01&0&E8 : Intel(R) ICH8 Family USB Universal Host Controller - 2830
PCI\VEN_8086&DEV_2831&SUBSYS_01F91028&REV_02\3&61AAA01&0&E9 : Intel(R) ICH8 Family USB Universal Host Controller - 2831
PCI\VEN_8086&DEV_2832&SUBSYS_01F91028&REV_02\3&61AAA01&0&EA : Intel(R) ICH8 Family USB Universal Host Controller - 2832
PCI\VEN_8086&DEV_2834&SUBSYS_01F91028&REV_02\3&61AAA01&0&D0 : Intel(R) ICH8 Family USB Universal Host Controller - 2834
PCI\VEN_8086&DEV_2835&SUBSYS_01F91028&REV_02\3&61AAA01&0&D1 : Intel(R) ICH8 Family USB Universal Host Controller - 2835
PCI\VEN_8086&DEV_2836&SUBSYS_01F91028&REV_02\3&61AAA01&0&EF : Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
PCI\VEN_8086&DEV_283A&SUBSYS_01F91028&REV_02\3&61AAA01&0&D7 : Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
PCI\VEN_8086&DEV_283E&SUBSYS_01F91028&REV_02\3&61AAA01&0&FB : Intel(R) ICH8 Family SMBus Controller - 283E
PCI\VEN_8086&DEV_283F&SUBSYS_00000000&REV_02\3&61AAA01&0&E0 : Intel(R) ICH8 Family PCI Express Root Port 1 - 283F
PCI\VEN_8086&DEV_2841&SUBSYS_00000000&REV_02\3&61AAA01&0&E1 : Intel(R) ICH8 Family PCI Express Root Port 2 - 2841
PCI\VEN_8086&DEV_2849&SUBSYS_00000000&REV_02\3&61AAA01&0&E5 : Intel(R) ICH8 Family PCI Express Root Port 6 - 2849
PCI\VEN_8086&DEV_284B&SUBSYS_01F91028&REV_02\3&61AAA01&0&D8 : Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_2850&SUBSYS_01F91028&REV_02\3&61AAA01&0&F9 : Intel(R) ICH8M Ultra ATA Storage Controllers - 2850
PCI\VEN_8086&DEV_2A00&SUBSYS_00000000&REV_0C\3&61AAA01&0&00 : Mobile Intel(R) PM965/GM965/GL960/GS965 Express Processor to DRAM Controller - 2A00
PCI\VEN_8086&DEV_2A01&SUBSYS_00000000&REV_0C\3&61AAA01&0&08 : Mobile Intel(R) PM965/GM965/GL960/GS965 Express PCI Express Root Port - 2A01
PCI\VEN_8086&DEV_4229&SUBSYS_11208086&REV_61\4&AB208E&0&00E1: Intel(R) Wireless WiFi Link 4965AGN
23 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&139B5C82&0                                   : USB Root Hub
USB\ROOT_HUB\4&291EE475&0                                   : USB Root Hub
USB\ROOT_HUB\4&31D948AA&0                                   : USB Root Hub
USB\ROOT_HUB\4&36706929&0                                   : USB Root Hub
USB\ROOT_HUB\4&CE55D9D&0                                    : USB Root Hub
USB\ROOT_HUB20\4&18F00B04&0                                 : USB Root Hub
USB\ROOT_HUB20\4&3B65BF0F&0                                 : USB Root Hub
USB\VID_0483&PID_2016\5&4589DBC&0&2                         : TouchChip Fingerprint Coprocessor
USB\VID_0B97&PID_7761\5&4589DBC&0&1                         : Generic USB Hub
USB\VID_0B97&PID_7772\6&C4C946D&0&2                         : O2Micro OZ776 USB CCID Smartcard Reader
10 matching device(s) found.
 
============= 
Input Devices 
============= 
No matching devices found.
 
============ 
ACPI Devices 
============ 
ACPI\ACPI0003\2&DABA3FF&0                                   : Microsoft AC Adapter
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_0                : Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_1                : Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz
ACPI\PNP0000\4&2F94427B&0                                   : Programmable interrupt controller
ACPI\PNP0100\4&2F94427B&0                                   : System timer
ACPI\PNP0103\4&2F94427B&0                                   : High Precision Event Timer
ACPI\PNP0200\4&2F94427B&0                                   : Direct memory access controller
ACPI\PNP0303\4&2F94427B&0                                   : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0501\4&2F94427B&0                                   : Communications Port (COM1)
ACPI\PNP0800\4&2F94427B&0                                   : System speaker
ACPI\PNP0A03\2&DABA3FF&0                                    : PCI bus
ACPI\PNP0B00\4&2F94427B&0                                   : System CMOS/real time clock
ACPI\PNP0C01\1                                              : System board
ACPI\PNP0C01\2                                              : System board
ACPI\PNP0C01\3                                              : System board
ACPI\PNP0C01\4                                              : System board
ACPI\PNP0C01\5                                              : System board
ACPI\PNP0C04\4&2F94427B&0                                   : Numeric data processor
ACPI\PNP0C0A\1                                              : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0A\2                                              : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNP0C0D\2&DABA3FF&0                                    : ACPI Lid
ACPI\PNP0C0E\2&DABA3FF&0                                    : ACPI Sleep Button
ACPI\PNP0C14\0                                              : Microsoft Windows Management Interface for ACPI
ACPI\PNP0F13\4&2F94427B&0                                   : Dell Touchpad
ACPI\THERMALZONE\THM_                                       : ACPI Thermal Zone
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor PC
28 matching device(s) found.
 
============ 
 HDA Audio 
============ 
HDAUDIO\FUNC_01&VEN_8384&DEV_76A0&SUBSYS_102801F9&REV_1002\4&8F2C18F&0&0001: SigmaTel High Definition Audio CODEC
1 matching device(s) found.
 
============ 
RAID Devices 
============ 
PCI\VEN_8086&DEV_2828&SUBSYS_01F91028&REV_02\3&61AAA01&0&FA
    Name: Intel(R) ICH8M 3 port Serial ATA Storage Controller - 2828
    Hardware ID's:
        PCI\VEN_8086&DEV_2828&SUBSYS_01F91028&REV_02
        PCI\VEN_8086&DEV_2828&SUBSYS_01F91028
        PCI\VEN_8086&DEV_2828&CC_01018F
        PCI\VEN_8086&DEV_2828&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_2828&REV_02
        PCI\VEN_8086&DEV_2828
        PCI\VEN_8086&CC_01018F
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018F
        PCI\CC_0101
PCI\VEN_8086&DEV_2850&SUBSYS_01F91028&REV_02\3&61AAA01&0&F9
    Name: Intel(R) ICH8M Ultra ATA Storage Controllers - 2850
    Hardware ID's:
        PCI\VEN_8086&DEV_2850&SUBSYS_01F91028&REV_02
        PCI\VEN_8086&DEV_2850&SUBSYS_01F91028
        PCI\VEN_8086&DEV_2850&CC_01018A
        PCI\VEN_8086&DEV_2850&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_2850&REV_02
        PCI\VEN_8086&DEV_2850
        PCI\VEN_8086&CC_01018A
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018A
        PCI\CC_0101
2 matching device(s) found.

I have tried both versions and I'm not seeing this problem so I am wondering if it was fixed or if their is some reason it works for me and not for zilexa?

261

(19 replies, posted in 3rd Party DriverPacks)

FYI:
I just finished 3 installations on a Dell Vostro 1000 with AMD64x2
I used latest driver packs and all the latest 3rd Party driver packs... everything installed except:

PCI\VEN_1180&DEV_0843&SUBSYS_022A1028&REV_12\4&B216F0A&0&09A4: Ricoh SD/MMC Host Controller

Since I am using both packs I also posted this here:
http://forum.driverpacks.net/viewtopic. … 590#p27590

Thanks

EDIT: The Host adapter DID install:

PCI\VEN_1180&DEV_0822&SUBSYS_022A1028&REV_22\4&B216F0A&0&08A4: Ricoh SD Bus Host Adapter

262

(53 replies, posted in 3rd Party DriverPacks)

FYI:
I just finished 3 installations on a Dell Vostro 1000 with AMD64x2
I used latest driver packs and all the latest 3rd Party driver packs... everything installed except:

PCI\VEN_1180&DEV_0843&SUBSYS_022A1028&REV_12\4&B216F0A&0&09A4: Ricoh SD/MMC Host Controller

Thanks

EDIT: The Host adapter DID install:

PCI\VEN_1180&DEV_0822&SUBSYS_022A1028&REV_22\4&B216F0A&0&08A4: Ricoh SD Bus Host Adapter

I continue to learn more and more as I use the pack and actually I have been using the packs for at least a year but I'm not an avid poster here... more a quiet observer and active researcher... whereas I'm pretty active at RyanVM forum so now I will try to provide more feedback here as I do my latest integrations.

THANKS for everything and trust me I know much better than to think any thing on here is easy smile

EDIT: I didn't refresh my cache so the delayed post I made below was out of sequence and already answered above

EDIT 2: I did a 3rd install and the D: folder was properly deleted so I consider this to be a "one of" and won't over think it wink

Since the D folder didn't remain the 2nd time I will try a 3rd install to see what happens but it obviously should not remain after the finished installation so my real question is regarding the .XLS and .TXT files... I have never seen these before so I am wondering if this is a problem with a driver pack or is this something new that is meant to be left behind.

As far as deleting them after the completed install: since they are in the root C:\ I'm not understanding what you mean by "I delete them after integrating in distributive in \OEM folder"

Guys... I'm a little confused trying to follow this thread post regarding the above noted XLS files so if I am posting in the wrong area feel free to correct me. I just finished two installtions on a Vostro 1000 with a disk that I just integrated all the latest driver packs and the latest 3rd party sets including the monitor pack.

Installation 1 left me the D folder as well as the txt and xls files noted above... I re-ran the finisher and rebooted and the D folder was gone
Installation 2 left me with just the txt and xls files noted above

Are the xls and txt files supposed to be there?  I did search for answers before I posted... sorry if I missed any posts...

266

(36 replies, posted in News)

Happy New Year to ALL and my sincere Thanks to everyone!!!

PS: SamLab... "Christian" Christmas is not necessarily on January 7th... many "Christian's" celebrate on December 25th... either way have a very Merry Christmas as well smile