1 Reply by ElSputo

(11 replies, posted in BartPE - UBCD4Win - WinPE)

This is the hwID dump with the bios setting @ auto raid/ata ... dumped using the savehwids.exe tool while in Windows 7 64bit

RAID Devices
============
PCI\VEN_8086&DEV_3B20&SUBSYS_02DA1028&REV_05\3&172E68DD&0&FA
    Name: Standard Dual Channel PCI IDE Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_3B20&SUBSYS_02DA1028&REV_05
        PCI\VEN_8086&DEV_3B20&SUBSYS_02DA1028
        PCI\VEN_8086&DEV_3B20&CC_01018F
        PCI\VEN_8086&DEV_3B20&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_3B20&REV_05
        PCI\VEN_8086&DEV_3B20
        PCI\VEN_8086&CC_01018F
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018F
        PCI\CC_0101
PCI\VEN_8086&DEV_3B26&SUBSYS_02DA1028&REV_05\3&172E68DD&0&FD
    Name: Standard Dual Channel PCI IDE Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_3B26&SUBSYS_02DA1028&REV_05
        PCI\VEN_8086&DEV_3B26&SUBSYS_02DA1028
        PCI\VEN_8086&DEV_3B26&CC_010185
        PCI\VEN_8086&DEV_3B26&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_3B26&REV_05
        PCI\VEN_8086&DEV_3B26
        PCI\VEN_8086&CC_010185
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_010185
        PCI\CC_0101
PCI\VEN_8086&DEV_3B66&SUBSYS_02DA1028&REV_06\3&172E68DD&0&B2
    Name: Standard Dual Channel PCI IDE Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_3B66&SUBSYS_02DA1028&REV_06
        PCI\VEN_8086&DEV_3B66&SUBSYS_02DA1028
        PCI\VEN_8086&DEV_3B66&CC_010185
        PCI\VEN_8086&DEV_3B66&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_3B66&REV_06
        PCI\VEN_8086&DEV_3B66
        PCI\VEN_8086&CC_010185
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_010185
        PCI\CC_0101

Go to forum: BartPE - UBCD4Win - WinPE

2 Reply by ElSputo

(11 replies, posted in BartPE - UBCD4Win - WinPE)

I'm having the same issue (blue screen after) with a Dell Optiplex 980 which also uses Intel's RST... Q57 chipset I believe.  I'm trying the disable mass storage and will report back results.

I'm using Bart PE 3110a and driverpacks base 10.06, massstorage 10.06, lan 10.05.1 and wlan 10.05.1


update:
The bios has 4 options for storage setup:

Auto raid/AHCI
Auto raid/ATA
Raid on
Legacy

I tried on all 4 settings with the mass stor plugin disabled and the intel rst f6 drivers in a folder under pebuilder3110a\drivers\SCSIAdapter\
Same bluescreen, gets through the initial loading screen, then windows logo for a little bit, then blue.

Go to forum: BartPE - UBCD4Win - WinPE