You are not logged in. Please login or register.
Active topics Unanswered topics
Search options (Page 2 of 2)
There are no drivers for DWL-G122 rev.B1 and DWL-G122 rev.C1 in DP_WLAN_wnt5_x86-32_712.7z
You can find them in your C:\Program Files\DLINK folder or there: http://rapidshare.com/files/88995531/DL … _C.7z.html (241 KB) (w/o installer and AirPlus Utility)
In a fact, these drivers are outdated variants of Ralink RT2500/RT73 (\D\W\R2)
Ralink don`t support DLink`s hwids
It would be better to implement this hwids in Ralink inf`s ( tested and used many times)
USB\VID_2001&PID_3C00 - D-Link DWL-G122 rev.B1 - rt2500usb chip
USB\VID_07D1&PID_3C03 - D-Link DWL-G122 rev.C1 - rt73 chip
Added : last Ralink driver for rt73 (10/01/2007, 1.02.03.0000)
http://rapidshare.com/files/89003065/Ra … 73.7z.html (144 KB w/o installer)
Source: http://www.ralink.com.tw/data/drivers/I … 1.0.29.exe
Jaak,
Such computers don`t need in driverpacks at all
But one more CD ( w/o DriverPacks ) must be prepared for that a case
When I install Windows with the last DP_MassStorage I result a BSOD ( GUI ) on old Socket370 mobo`s with VT82C596A & VT82C686A bridges
IDE controllers have the same HWID`s : PCI\VEN_1106&DEV_0571&SUBSYS_00000000&REV_06\2&EBB567F&0&39
Installation breaks on entry
[vide_PATA_Inst_x32.NTx86.Interfaces] from "c:\d\m\v\3\vminiide.inf".
...
Full install "PCI\VEN_1106&DEV_0571&SUBSYS_00000000&REV_06\2&EBB567F&0&39"
in SetupApi.log
On the other hand the same c:\d\m\v\3\ driver installation from Windows device manager is O`K
There is no such a problem with VIA KT133A (PCI\VEN_1106&DEV_0571&SUBSYS_00000000&REV_06\3&61AAA01&0&39)
and VIA KT400A (PCI\VEN_1106&DEV_0571&SUBSYS_00000000&REV_06\3&61AAA01&0&79)
IDE contollers (Socket462)
mr_smartepants
D-Link DWL-G122 rev.B1 - USB\VID_2001&PID_3C00 - rt2500usb chip
D-Link DWL-G122 rev.C1 - USB\VID_07D1&PID_3C03 - rt73 chip
.inf files for DLink modified by netf0rger (there is also some improvements)
http://rapidshare.com/files/29055997/DLink_inf.7z.html
mr_smartepants
I use this drivers with modified .inf for DLink DWL-G122rev.B1 (rt2500usb) and DLink DWL-G122rev.C1(rt73)
in 3dParty DP and don`t have originally supported hardware
Ralink USB(RT257x/RT2671) 01/18/2007
http://www.ralink.com.tw/data/IS_AP_STA … .0.7.6.zip
rt2500usb DriverVer=11/08/2006, 2.01.01.0000 (DP_WLAN_7.04\D\W\R\2 DriverVer =10/17/2005, 2.01.00.0000)
rt73 DriverVer = 12/21/2006, 1.02.00.0000 (DP_WLAN_7.04\D\W\R\2 DriverVer = 06/08/2006, 1.01.01.0000)
Drivers without installer (200kB)
http://rapidshare.com/files/29022361/Ra … AN.7z.html
DPBASE 7012, 612; KTD default settings
The structure of DriverPacks folder has extra levels:
C:\WINDOWS\DriverPacks\D\3\3\...
C:\WINDOWS\DriverPacks\D\M\M\...
and so on
Could not apply KTD on"C:\D\CP", since it does not exist!
DPs_BASE_610
DP_CPU_wnt5_x86-32_6091
There is D\CPU not D\CP
I'd like to install Windows without connecting all my removable devices (USB first of all, but PCMCIA, 1394, COM, LPT, VGA would be usefull too for all people ) and don't like to KTD all drivers. Is this really to make such support in your DriverPacks BASE or can you collect all of them into one new DP for manual selection?
Posts found [ 26 to 34 of 34 ]
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2009 PunBB.
[ Generated in 0.013 seconds, 7 queries executed ]