No problem, OverFlow... we're here to help out test and provide feedback...
26 2008-11-12 19:53:12
Re: [SLV] QL2300.SYS File not found (6 replies, posted in DriverPack Mass Storage)
27 2008-11-12 13:57:13
Topic: [SLV] QL2300.SYS File not found (6 replies, posted in DriverPack Mass Storage)
ql2300.sys file not found during WXP Setup
DP Mass Storage 811B2
28 2008-11-11 11:59:13
Re: [REQ]Wrong Driver detected on ECS-D25 Laptop - is an Update Available? (17 replies, posted in DriverPack Sound)
Sorry for the long delay... Here it is.....
Elitegroup ECS-D25 Laptop
No sound or Wrond Driver Detected
HWIDs
===========
PCI Devices
===========
PCI\VEN_1002&DEV_4371&SUBSYS_00000000&REV_80\3&13C0B0C5&0&A4: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_4372&SUBSYS_205F161F&REV_83\3&13C0B0C5&0&A0: ATI SMBus
PCI\VEN_1002&DEV_4373&SUBSYS_205F161F&REV_80\3&13C0B0C5&0&9A: Standard Enhanced PCI to USB Host Controller
PCI\VEN_1002&DEV_4374&SUBSYS_205F161F&REV_80\3&13C0B0C5&0&98: Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_4375&SUBSYS_205F161F&REV_80\3&13C0B0C5&0&99: Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_4376&SUBSYS_205F161F&REV_80\3&13C0B0C5&0&A1: Standard Dual Channel PCI IDE Controller
PCI\VEN_1002&DEV_4377&SUBSYS_00000000&REV_80\3&13C0B0C5&0&A3: PCI standard ISA bridge
PCI\VEN_1002&DEV_437B&SUBSYS_205F161F&REV_01\3&13C0B0C5&0&A2: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_1002&DEV_5A31&SUBSYS_00000000&REV_01\3&13C0B0C5&0&00: PCI standard host CPU bridge
PCI\VEN_1002&DEV_5A36&SUBSYS_00000000&REV_00\3&13C0B0C5&0&20: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_5A37&SUBSYS_00000000&REV_00\3&13C0B0C5&0&28: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_5A3F&SUBSYS_00000000&REV_00\3&13C0B0C5&0&08: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_5A62&SUBSYS_205F161F&REV_00\4&2C0D4F31&0&2808: ATI RADEON XPRESS 200M Series
PCI\VEN_10EC&DEV_8185&SUBSYS_818510EC&REV_20\4&FCF0450&0&48A4: Realtek RTL8185 54M Wireless LAN Network Adapter
PCI\VEN_11AB&DEV_4352&SUBSYS_2054161F&REV_14\4&1BF192B7&0&0020: Marvell Yukon 88E8038 PCI-E Fast Ethernet Controller
15 matching device(s) found.
===========
USB Devices
===========
USB\ROOT_HUB\4&29B3C6E1&0 : USB Root Hub
USB\ROOT_HUB\4&388454D&0 : USB Root Hub
USB\ROOT_HUB20\4&1D68CDF5&0 : USB Root Hub
USB\VID_0718&PID_0432\0784172B1B4F : USB Mass Storage Device
USBSTOR\DISK&VEN_IMATION&PROD_NANO&REV_PMAP\0784172B1B4F&0 : Imation Nano USB Device
5 matching device(s) found.
=============
Input Devices
=============
No matching devices found.
============
ACPI Devices
============
ACPI\ACPI0003\2&DABA3FF&0 : Microsoft AC Adapter
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_14\_0 : Genuine Intel(R) CPU T1300 @ 1.66GHz
ACPI\PNP0000\4&FAB2443&0 : Programmable interrupt controller
ACPI\PNP0100\4&FAB2443&0 : System timer
ACPI\PNP0200\4&FAB2443&0 : Direct memory access controller
ACPI\PNP0303\4&FAB2443&0 : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0800\4&FAB2443&0 : System speaker
ACPI\PNP0A03\1 : PCI bus
ACPI\PNP0B00\4&FAB2443&0 : System CMOS/real time clock
ACPI\PNP0C01\4&FAB2443&0 : System board
ACPI\PNP0C02\3&13C0B0C5&0 : Motherboard resources
ACPI\PNP0C02\4&FAB2443&0 : Motherboard resources
ACPI\PNP0C04\4&FAB2443&0 : Numeric data processor
ACPI\PNP0C09\3&13C0B0C5&0 : Microsoft ACPI-Compliant Embedded Controller
ACPI\PNP0C0A\1 : Microsoft ACPI-Compliant Control Method Battery
ACPI\PNP0C0C\2&DABA3FF&0 : ACPI Power Button
ACPI\PNP0C0D\2&DABA3FF&0 : ACPI Lid
ACPI\PNP0C0E\2&DABA3FF&0 : ACPI Sleep Button
ACPI\SYN0B01\4&FAB2443&0 : PS/2 Compatible Mouse
ACPI\THERMALZONE\THRM : ACPI Thermal Zone
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000 : ACPI Uniprocessor PC
23 matching device(s) found.
============
HDA Audio
============
HDAUDIO\FUNC_01&VEN_8384&DEV_7690&SUBSYS_161F205F&REV_1022\4&3F5DB0C&0&0001: IDT High Definition Audio CODEC
HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11C10001&REV_1002\4&3F5DB0C&0&0101: Agere Systems HDA Modem
2 matching device(s) found.29 2008-11-06 19:59:00
Topic: [REQ]Wrong Driver detected on ECS-D25 Laptop - is an Update Available? (17 replies, posted in DriverPack Sound)
ECS-D25
HWIDs
PCI\VEN_1002&DEV_4371&SUBSYS_00000000&REV_80\3&13C0B0C5&0&A4: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_4372&SUBSYS_205F161F&REV_83\3&13C0B0C5&0&A0: ATI SMBus
PCI\VEN_1002&DEV_4373&SUBSYS_205F161F&REV_80\3&13C0B0C5&0&9A: Standard Enhanced PCI to USB Host Controller
PCI\VEN_1002&DEV_4374&SUBSYS_205F161F&REV_80\3&13C0B0C5&0&98: Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_4375&SUBSYS_205F161F&REV_80\3&13C0B0C5&0&99: Standard OpenHCD USB Host Controller
PCI\VEN_1002&DEV_4376&SUBSYS_205F161F&REV_80\3&13C0B0C5&0&A1: Standard Dual Channel PCI IDE Controller
PCI\VEN_1002&DEV_4377&SUBSYS_00000000&REV_80\3&13C0B0C5&0&A3: PCI standard ISA bridge
PCI\VEN_1002&DEV_437B&SUBSYS_205F161F&REV_01\3&13C0B0C5&0&A2: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_1002&DEV_5A31&SUBSYS_00000000&REV_01\3&13C0B0C5&0&00: PCI standard host CPU bridge
PCI\VEN_1002&DEV_5A36&SUBSYS_00000000&REV_00\3&13C0B0C5&0&20: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_5A37&SUBSYS_00000000&REV_00\3&13C0B0C5&0&28: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_5A3F&SUBSYS_00000000&REV_00\3&13C0B0C5&0&08: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_5A62&SUBSYS_205F161F&REV_00\4&2C0D4F31&0&2808: ATI RADEON XPRESS 200M Series
PCI\VEN_10EC&DEV_8185&SUBSYS_818510EC&REV_20\4&FCF0450&0&48A4: Realtek RTL8185 54M Wireless LAN Network Adapter
PCI\VEN_11AB&DEV_4352&SUBSYS_2054161F&REV_14\4&1BF192B7&0&0020: Marvell Yukon 88E8038 PCI-E Fast Ethernet ControllerDriverpacks used:
DPs_BASE_810rc3
DP_Chipset_wnt5_x86-32_810D
DP_CPU_wnt5_x86-32_808
DP_PhysX_G_A_wnt5_x86-32_809rc4
DP_Graphics_A_wnt5_x86-32_809rc4
DP_Graphics_B_wnt5_x86-32_810a
DP_Graphics_C_wnt5_x86-32_810a
DP_MassStorage_wnt5_x86-32_810H
DP_LAN_wnt5_x86-32_810B
DP_WLAN_wnt5_x86-32_806A
DP_Sound_A_wnt5_x86-32_809rc2
DP_Sound_B_wnt5_x86-32_809A
Note: I couldn't find a downloadable driver on ECS website, even on their archive list....
it seems that this model in on Chinese ECS website {couldn't read chinese}
30 2008-09-06 20:31:41
Re: Ecs P4M900T-M2 (8 replies, posted in DriverPack Mass Storage)
@Overflow
Without those modification in MassStorage [V3 Section] installation couldn't find any hard disk but I haven't tried without Driverpacks but I'll test it.
Recent test - only "0571" needs to move in V3 Section.
BTW, I'm using RVM method Nanno Fabio's SP3 Update Packs.
I'll Report back tomorrow....
*edit*
I haven't remove any Windows Drivers except removed(nlite'd 1.4.9) all Games including Pinball - nothing else.
31 2008-09-05 17:44:14
Re: Ecs P4M900T-M2 (8 replies, posted in DriverPack Mass Storage)
@SamLab
Base on this thread http://forum.driverpacks.net/viewtopic.php?id=2635 we have the same board, could you test it with the above mentioned modified V3 section.... if it works for you too.
and Thanks in Advance.
32 2008-09-05 17:36:30
Re: Ecs P4M900T-M2 (8 replies, posted in DriverPack Mass Storage)
I temporarily solved by modifying V3 Section:
[V3]
ms_count=2
ms_1_deviceName="VIA SATA/PATA IDE"
ms_1_tag="VIDEX32"
ms_1_sysFile="VIDEX32.sys"
ms_1_hwids="PCI\VEN_1106&DEV_0571&CC_0101,PCI\VEN_1106&DEV_5372&CC_0101,PCI\VEN_1106&DEV_3149&CC_0101"
ms_1_isBusExtender=false
ms_1_exc_skipIfOS="w2k"
ms_2_deviceName="VIA SATA/PATA IDE"
ms_2_tag="VIDEX32"
ms_2_sysFile="VIDEX32.sys"
ms_2_hwids="PCI\VEN_1106&DEV_3149&CC_0101"
ms_2_isBusExtender=false
ms_2_exc_skipIfOS="wxp,w2k3"
33 2008-09-04 21:34:20
Topic: DP Base 8.08 (1 replies, posted in Feedback and Support - DriverPacks Base)
Where can I download Base 8.08?
34 2008-09-04 20:34:37
Re: Ecs P4M900T-M2 (8 replies, posted in DriverPack Mass Storage)
DPs_BASE.ini
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "E:\BUILD\XPBUILD"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "yes"
DP_Graphics_B = "yes"
DP_Graphics_C = "yes"
DP_LAN = "yes"
DP_MassStorage = "yes"
DP_Sound_A = "yes"
DP_Sound_B = "yes"
DP_WLAN = "yes"
DP_MassStorage_textmode = "yes"35 2008-09-04 20:29:27
Re: Ecs P4M900T-M2 (8 replies, posted in DriverPack Mass Storage)
DPs_BASE.log
2008-09-04 15:57:04 : <INIT> DriverPacks BASE 8.06 initialized.
2008-09-04 15:57:04 : <INIT> Host environment: WIN_XP Service Pack 3 on X86 CPU.
2008-09-04 15:57:04 : <INIT> Created temporary working directory.
2008-09-04 15:57:04 : <INIT> Imported proxy settings from Internet Explorer.
2008-09-04 15:57:04 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2008-09-04 15:57:04 : <INIT> Detected DriverPack Chipset 8.08.C!
2008-09-04 15:57:04 : <INIT> Detected DriverPack CPU 8.0527!
2008-09-04 15:57:04 : <INIT> Detected DriverPack Graphics A 8.09.a!
2008-09-04 15:57:04 : <INIT> Detected DriverPack Graphics B 8.07.A!
2008-09-04 15:57:04 : <INIT> Detected DriverPack Graphics C 8.07.a!
2008-09-04 15:57:04 : <INIT> Detected DriverPack LAN 8.08.B!
2008-09-04 15:57:04 : <INIT> Detected DriverPack MassStorage 8.08A1!
2008-09-04 15:57:04 : <INIT> Detected DriverPack Sound A 8.07.a!
2008-09-04 15:57:04 : <INIT> Detected DriverPack Sound B 8.05!
2008-09-04 15:57:04 : <INIT> Detected DriverPack WLAN 8.06.A!
2008-09-04 15:57:04 : <INIT> Could not detect any 3rd party DriverPacks.
2008-09-04 15:57:04 : <INIT> Finished scanning.
2008-09-04 15:57:04 : <INIT> Detected settings file "E:\BUILD\SLIP\DPs_BASE.ini".
2008-09-04 15:57:04 : <INIT> Windows XP Professional - Retail SP3 detected.
2008-09-04 15:57:04 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2008-09-04 15:57:04 : <INIT> Imported settings from settings file.
2008-09-04 15:57:04 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2008-09-04 15:57:04 : <GUI> Initialized GUI.
2008-09-04 15:57:04 : <GUI> Created a list of all available language files.
2008-09-04 15:57:04 : <GUI> Set the last used language, English, as the GUI language.
2008-09-04 15:57:16 : <GUI> Saved settings!
2008-09-04 15:57:16 : <GUI> Closed GUI.
2008-09-04 15:57:17 : <SEL> Selected module: mod_slip_wxp_x86-32_disc_m2.
2008-09-04 15:57:18 : <PREP> Removed all attributes from \I386.
2008-09-04 15:57:18 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2008-09-04 15:57:18 : <SLIP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2008-09-04 15:57:30 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2008-09-04 15:57:30 : <SLIP> E:\BUILD\SLIP\QSC\wnt5_x86-32_uni_DP_MassStorage_808A1_textmode\DriverPack_MassStorage_wnt5_x86-32.ini
2008-09-04 15:57:31 : <SLIP> Processing the files now. This may take a minute.
2008-09-04 15:57:55 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2008-09-04 15:57:55 : <SLIP> txtsetup.sif Backed-up Successfully
2008-09-04 15:57:55 : <SLIP> dosnet.inf Backed-up Successfully
2008-09-04 15:58:02 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2008-09-04 15:58:03 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2008-09-04 15:58:48 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2008-09-04 15:58:48 : <SLIP> Created necessary directory structure for method 2.
2008-09-04 15:58:48 : <SLIP> Copying files necessary for method 2.
2008-09-04 15:58:48 : <SLIP> Extracted additional files necessary for method 2.
2008-09-04 15:58:49 : <SLIP> expanded setup.ex_ to setuporg.exe
2008-09-04 15:58:49 : <SLIP> SETUP.EX_ Backed-up Successfully
2008-09-04 15:58:49 : <SLIP> Compressed setup.exe to SETUP.EX_.
2008-09-04 15:58:49 : <SLIP> Method 2 setup.ex_ installed
2008-09-04 15:58:49 : <SLIP> Created \I386\presetup.cmd file.
2008-09-04 15:58:49 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2008-09-04 15:58:49 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2008-09-04 15:58:49 : <SLIP> Copied DriverPack Chipset to \OEM.
2008-09-04 15:58:49 : <SLIP> Copied DriverPack CPU to \OEM.
2008-09-04 15:58:52 : <SLIP> Copied DriverPack Graphics A to \OEM.
2008-09-04 15:58:56 : <SLIP> Copied DriverPack Graphics B to \OEM.
2008-09-04 15:59:01 : <SLIP> Copied DriverPack Graphics C to \OEM.
2008-09-04 15:59:01 : <SLIP> Copied DriverPack LAN to \OEM.
2008-09-04 15:59:01 : <SLIP> Copied DriverPack MassStorage to \OEM.
2008-09-04 15:59:04 : <SLIP> Copied DriverPack Sound A to \OEM.
2008-09-04 15:59:07 : <SLIP> Copied DriverPack Sound B to \OEM.
2008-09-04 15:59:09 : <SLIP> Copied DriverPack WLAN to \OEM.
2008-09-04 15:59:09 : <SLIP> Copied DriverPacks to \OEM.
2008-09-04 15:59:09 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2008-09-04 15:59:09 : <SLIP> WINNT.SIF Backed-up Successfully
2008-09-04 15:59:09 : <SLIP> Updated \I386\winnt.sif to support method 2.
2008-09-04 15:59:09 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2008-09-04 15:59:09 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2008-09-04 15:59:09 : <SLIP> DP_Install_Tool was copied successfully
2008-09-04 15:59:09 : <SLIP> Slipstream finished in 1 minutes and 53 seconds.
2008-09-04 15:59:17 : <CLNP> Temporary working directory successfully deleted.
2008-09-04 15:59:17 : Program terminated.36 2008-09-04 20:18:57
Topic: Ecs P4M900T-M2 (8 replies, posted in DriverPack Mass Storage)
ECS P4M900T-M2
DP MassStorage 807a/808A
"Setup did not find any hard disk drives installed in your computer"
===========
PCI Devices
===========
PCI\VEN_10B7&DEV_9200&SUBSYS_100010B7&REV_78\3&267A616A&0&48: 3Com EtherLink XL 10/100 PCI For Complete PC Management NIC (3C905C-TX)
PCI\VEN_1106&DEV_0364&SUBSYS_00000000&REV_00\3&267A616A&0&00: VIA Standard Host Bridge
PCI\VEN_1106&DEV_0571&SUBSYS_1B471019&REV_07\3&267A616A&0&79: VIA Bus Master IDE Controller
PCI\VEN_1106&DEV_1364&SUBSYS_00000000&REV_00\3&267A616A&0&01: VIA Standard Host Bridge
PCI\VEN_1106&DEV_2364&SUBSYS_00000000&REV_00\3&267A616A&0&02: VIA Standard Host Bridge
PCI\VEN_1106&DEV_287E&SUBSYS_00000000&REV_00\3&267A616A&0&8F: VIA Ultra VLINK Controller
PCI\VEN_1106&DEV_3038&SUBSYS_1B471019&REV_B0\3&267A616A&0&80: VIA Rev 5 or later USB Universal Host Controller
PCI\VEN_1106&DEV_3038&SUBSYS_1B471019&REV_B0\3&267A616A&0&81: VIA Rev 5 or later USB Universal Host Controller
PCI\VEN_1106&DEV_3038&SUBSYS_1B471019&REV_B0\3&267A616A&0&82: VIA Rev 5 or later USB Universal Host Controller
PCI\VEN_1106&DEV_3038&SUBSYS_1B471019&REV_B0\3&267A616A&0&83: VIA Rev 5 or later USB Universal Host Controller
PCI\VEN_1106&DEV_3065&SUBSYS_01021019&REV_7C\3&267A616A&0&90: VIA Compatable Fast Ethernet Adapter
PCI\VEN_1106&DEV_3104&SUBSYS_1B471019&REV_90\3&267A616A&0&84: VIA USB Enhanced Host Controller
PCI\VEN_1106&DEV_3288&SUBSYS_1B471019&REV_10\3&299B68E7&0&08: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_1106&DEV_3364&SUBSYS_00000000&REV_00\3&267A616A&0&03: VIA Standard Host Bridge
PCI\VEN_1106&DEV_3371&SUBSYS_19750908&REV_01\4&354AEA31&0&0008: VIA Chrome9 HC IGP Family
PCI\VEN_1106&DEV_3372&SUBSYS_00000000&REV_00\3&267A616A&0&88: VIA Standard PCI to ISA Bridge
PCI\VEN_1106&DEV_337B&SUBSYS_00000000&REV_00\3&267A616A&0&98: VIA Standard Host Bridge
PCI\VEN_1106&DEV_4364&SUBSYS_00000000&REV_00\3&267A616A&0&04: VIA Standard Host Bridge
PCI\VEN_1106&DEV_5364&SUBSYS_53641106&REV_00\3&267A616A&0&05: VIA I/O APIC Interrupt Controller
PCI\VEN_1106&DEV_5372&SUBSYS_1B471019&REV_00\3&267A616A&0&78: Standard Dual Channel PCI IDE Controller
PCI\VEN_1106&DEV_6364&SUBSYS_00000000&REV_00\3&267A616A&0&06: VIA Security Device
PCI\VEN_1106&DEV_7364&SUBSYS_00000000&REV_00\3&267A616A&0&07: VIA Standard Host Bridge
PCI\VEN_1106&DEV_A364&SUBSYS_00000000&REV_80\3&267A616A&0&10: VIA PCI to PCI Bridge Controller
PCI\VEN_1106&DEV_B198&SUBSYS_00000000&REV_00\3&267A616A&0&08: VIA CPU to AGP2.0/AGP3.0 Controller
PCI\VEN_1106&DEV_C364&SUBSYS_00000000&REV_80\3&267A616A&0&18: VIA PCI to PCI Bridge Controller
ROOT\DISPLAY\0000 : PCI GDIHOOK5
26 matching device(s) found.M
37 2008-07-25 20:48:54
Re: [REQ] 64bit support - No... Not for NT5 based platforms (101 replies, posted in Feature Requests)
Count me in.... XP x64 drivers
38 2008-06-04 13:13:21
Re: DP Base 806 (5 replies, posted in Feedback and Support - DriverPacks Base)
Tested DP Base 806 and MassStorage 806 [Still downloading Graphics A/B/C, SOUND A/B]
So far on two Asus (via Chipset and Intel), ECS P4M900T-M2, Intel motherboard 845 Chipset and Generic VIA Board with Intel Celeron [PIII Celeron] with 256MB Memory... So far so Good -- No Problem or Error.
Use UA Installation CD with RVM Update Packs + lots of Addon, Booogy WMP 11 sliptreamer and Bâshrat the Sneaky [DP Base 806, DP Lan 806A,
DP MassStorage 806B, DP Chipset 80603, DP Graphics A-710/B-710/C-806A, DP Sound A-711/B-7101] Can't Test
DP WLan cause no Hardware to Test yet.
39 2008-06-04 11:51:54
Re: DP Base 806 (5 replies, posted in Feedback and Support - DriverPacks Base)
ok, understandable... Just thought that there were bugs being found and the new build is a fix.
I always update my UA Install CD whenever there's a new build, incase, there's an installation needed
I can always test. 
Test the new DP Base build but couldn't find any difference. 
40 2008-06-03 20:12:12
Topic: DP Base 806 (5 replies, posted in Feedback and Support - DriverPacks Base)
There's a new DP base nightly.
Just curious what's has change, new feature or being fix in this build.
Couldn't find changelog or thread regarding the nightly build.
41 2008-05-16 13:13:58
Re: Testpack DriverPack_LAN_wnt5_x86-32.ini [ver. 805D] (19 replies, posted in DriverPack LAN)
@Jaak
huh? really didn't notice that one, if you haven't said, I might as well try to peek others pack .
It's time to tinker. Thanks for info 
Out of topic: how do I PM someone in this forum?
42 2008-05-16 13:04:23
Re: Testpack DriverPack_LAN_wnt5_x86-32.ini [ver. 805D] (19 replies, posted in DriverPack LAN)
Oh, I see... a bit used to see lots of entry as in mass storage.
43 2008-05-15 21:42:09
Topic: Testpack DriverPack_LAN_wnt5_x86-32.ini [ver. 805D] (19 replies, posted in DriverPack LAN)
Test Pack DriverPack_LAN_wnt5_x86-32.ini [ver. 805D]
has only this entry:
DriverPack]
platform = "wnt5_x86-32"
name = "LAN"
rootDir = "D\L"
; OPTIONAL
classes = "Net"
driverCount = "137"
decompSize =
compSize =
; 8.05C
[NV3]
; REQUIRED
exc_count = 1
; OPTIONAL
exc_1_tagFiles = 0
exc_1_+hwids = 1
exc_1_+hwid1 = "PCI\VEN_10DE&DEV_00DF&SUBSYS_E0001458&REV_A2"
exc_1_+hwid2 = "PCI\VEN_10DE&DEV_00DF&SUBSYS_02501462&REV_A2"
exc_1_+hwid3 = "PCI\VEN_10DE&DEV_00DF&SUBSYS_A5511297&REV_A2"
exc_1_-hwids = 0
exc_1_+infFiles = 0
exc_1_-infFiles = 0
exc_1_commands = 2
exc_1_command1 = "%SystemDrive%\devcon.exe update %DPSROOT%\D\L\NV3\nvnetbus.inf "PCI\VEN_10DE&DEV_00DF&SUBSYS_*""
exc_1_command2 = "%SystemDrive%\devcon.exe update %DPSROOT%\D\L\NV3\nvenetfd.inf "{1a3e09be-1e45-494b-9174-d7385b45bbf5}\NVNET_DEV00DF""44 2008-02-20 14:40:53
Re: VIA VT8237S Chipset not Detecting [Mass Storage 8.02.1] (35 replies, posted in DriverPack Mass Storage)
@Overflow
Thanks, that's much easier to comprehend. Got it, i'll rememver that.
45 2008-02-20 12:38:50
Re: VIA VT8237S Chipset not Detecting [Mass Storage 8.02.1] (35 replies, posted in DriverPack Mass Storage)
@cdob
I think I didn't get that... could you further simplify it, Thanks.
@Jaak
Great, new nightly build to experiment... I have the whole day now [it's 9:30AM here] to do experiment. THANKS.
***oops***
404 File not found
46 2008-02-19 19:19:26
Re: VIA VT8237S Chipset not Detecting [Mass Storage 8.02.1] (35 replies, posted in DriverPack Mass Storage)
Jaak
The nightly doesn't seem to work. I tried my experiment method and did work on the ECS Board by moving the HWID to [V3] section. Also tried on the Asus and Generic VIA board also work with my experiment method.
But I'll still try the nightly on My Asus and Asrock by late tonight [GMT +8] since i'm still here with my buddy on University... Report back tomorrow.
47 2008-02-19 16:18:00
Re: VIA VT8237S Chipset not Detecting [Mass Storage 8.02.1] (35 replies, posted in DriverPack Mass Storage)
I'll do that and also tried to move the "PCI\VEN_1106&DEV_5372&CC_0101" from [V] to [V3].... Report back in an hour, got a slow 4X DVD burner.
*ALSO*
ms_1_isBusExtender=true -- what's the difference if the value is false?
48 2008-02-19 16:07:28
Topic: VIA VT8237S Chipset not Detecting [Mass Storage 8.02.1] (35 replies, posted in DriverPack Mass Storage)
Mass Storage not detecting SATA HDD on ECS P4M900T-M2
===========
PCI Devices
===========
PCI\VEN_1106&DEV_0364&SUBSYS_00000000&REV_00\3&267A616A&0&00: VIA Standard Host Bridge
PCI\VEN_1106&DEV_0571&SUBSYS_1B471019&REV_07\3&267A616A&0&79: VIA Bus Master IDE Controller - 0571
PCI\VEN_1106&DEV_1364&SUBSYS_00000000&REV_00\3&267A616A&0&01: VIA Standard Host Bridge
PCI\VEN_1106&DEV_2364&SUBSYS_00000000&REV_00\3&267A616A&0&02: VIA Standard Host Bridge
PCI\VEN_1106&DEV_287E&SUBSYS_00000000&REV_00\3&267A616A&0&8F: VIA Ultra VLINK Controller
PCI\VEN_1106&DEV_3038&SUBSYS_1B471019&REV_B0\3&267A616A&0&80: VIA Rev 5 or later USB Universal Host Controller
PCI\VEN_1106&DEV_3038&SUBSYS_1B471019&REV_B0\3&267A616A&0&81: VIA Rev 5 or later USB Universal Host Controller
PCI\VEN_1106&DEV_3038&SUBSYS_1B471019&REV_B0\3&267A616A&0&82: VIA Rev 5 or later USB Universal Host Controller
PCI\VEN_1106&DEV_3038&SUBSYS_1B471019&REV_B0\3&267A616A&0&83: VIA Rev 5 or later USB Universal Host Controller
PCI\VEN_1106&DEV_3065&SUBSYS_01021019&REV_7C\3&267A616A&0&90: VIA Rhine II Fast Ethernet Adapter
PCI\VEN_1106&DEV_3104&SUBSYS_1B471019&REV_90\3&267A616A&0&84: VIA USB Enhanced Host Controller
PCI\VEN_1106&DEV_3288&SUBSYS_1B471019&REV_10\3&299B68E7&0&08: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_1106&DEV_3364&SUBSYS_00000000&REV_00\3&267A616A&0&03: VIA Standard Host Bridge
PCI\VEN_1106&DEV_3371&SUBSYS_19750908&REV_01\4&354AEA31&0&0008: VIA Chrome9 HC IGP Family
PCI\VEN_1106&DEV_3372&SUBSYS_00000000&REV_00\3&267A616A&0&88: VIA Standard PCI to ISA Bridge
PCI\VEN_1106&DEV_337B&SUBSYS_00000000&REV_00\3&267A616A&0&98: VIA Standard Host Bridge
PCI\VEN_1106&DEV_4364&SUBSYS_00000000&REV_00\3&267A616A&0&04: VIA Standard Host Bridge
PCI\VEN_1106&DEV_5364&SUBSYS_53641106&REV_00\3&267A616A&0&05: VIA I/O APIC Interrupt Controller
[color=blue]PCI\VEN_1106&DEV_5372&SUBSYS_1B471019&REV_00\3&267A616A&0&78: VIA Serial ATA Controller - 5372[/color]
PCI\VEN_1106&DEV_6364&SUBSYS_00000000&REV_00\3&267A616A&0&06: VIA Security Device
PCI\VEN_1106&DEV_7364&SUBSYS_00000000&REV_00\3&267A616A&0&07: VIA Standard Host Bridge
PCI\VEN_1106&DEV_A364&SUBSYS_00000000&REV_80\3&267A616A&0&10: VIA PCI to PCI Bridge Controller
PCI\VEN_1106&DEV_B198&SUBSYS_00000000&REV_00\3&267A616A&0&08: VIA CPU to AGP Controller
PCI\VEN_1106&DEV_C364&SUBSYS_00000000&REV_80\3&267A616A&0&18: VIA PCI to PCI Bridge Controll49 2008-02-19 15:30:18
Re: [REQ] MassStorage 7.12 not Detecting SATA Harddisk (51 replies, posted in DriverPack Mass Storage)
Sorry, been away for work.... MassStorage now detects on VIA PT890 Chipset... Now Resolved
But the New Mass Storage doesn`t detect on ECS P4M900T-M2 Motherboard with P4M900 CD NB VT8237S SB Chipset.
Just encounter this Motherboard yesterday while visiting a friend in a University then tested the New Mass Storage 8021.
I'll create a new thread with HWID of this Motherboard.
50 2008-01-20 16:39:58
Re: [REQ] MassStorage 7.12 not Detecting SATA Harddisk (51 replies, posted in DriverPack Mass Storage)
@JakeLD
I'm also having problem with DP 803 during setup "The file LSI_SAS.sys could not be found." But manage to fix it by deleting entries referring to that file. Now testing DP 8015... - what's change?
@Jaak
No problem now regarding text mode setup on VIA PT890 Chipset but having a problem on the Hot Plug feature in Windows. But tried manual install works fine.
Now I'll try the DP 8015 see how it works...
Can't guarantee test on Server 2000/2003 .. I can make a test installation but it won't help much....
BTW: LSI_SAS.sys could not be found [DP_MassStorage_wnt5_x86-32_803], appears in every test installation I made on Intel base chipset motherboard and VIA.