DriverPacks.net Forum - Massstorage Drivers into XP install

Re: Massstorage Drivers into XP install

null@example.com (mr_smartepants) — Mon, 17 Sep 2012 16:51:29 +0000

OK, I'll see what I can do.

Re: Massstorage Drivers into XP install

null@example.com (Damnation) — Mon, 17 Sep 2012 07:32:24 +0000

Cinfirmed

0x7b at phase1 with unmodified driverpack, even with method 2

Re: Massstorage Drivers into XP install

null@example.com (Damnation) — Sun, 16 Sep 2012 16:35:04 +0000

So try an unmodified massstorage DP with Method 2

in the USB3 ports? or USB2 ports?

I'm pretty sure if I try it in the USB3 port without the USB3 Driver I'll get a 0x7b BSOD

Re: Massstorage Drivers into XP install

null@example.com (mr_smartepants) — Sun, 16 Sep 2012 14:51:16 +0000

Can you confirm if the un-modified dpms works under method-2?

Re: Massstorage Drivers into XP install

null@example.com (Damnation) — Sun, 16 Sep 2012 14:17:25 +0000

SUCCESS!

I included Chipset Driverspack

I modified the MassStorages Driverspack to include USB3 drivers

I used Method2

I KTDd the Massstorage drivers

I used RunonceEx, cause I like being prompted when it is doing stuff.

Anyway, here is the modified Massstorage pack:

http://www.megafileupload.com/en/file/3 … 06-7z.html

P.S

ETRON, FRESCO, and VIA, aren't working properly, Phase 1 can't find their files, I'm not sure why
ASMEDIA, RENESAS(which I have) and TEXAS, are working however (or Phase 1 won't bother you at least).

Re: Massstorage Drivers into XP install

null@example.com (Damnation) — Sat, 15 Sep 2012 16:43:46 +0000

But how would method 2 work if phase 1 is going to format the disk anyway?

Re: Massstorage Drivers into XP install

null@example.com (mr_smartepants) — Sat, 15 Sep 2012 14:12:10 +0000

Damnation wrote:

Phase 1 passed successfully, but Phase 2 immediately BSODd...

If that is true, then adding USB3 drivers to dpms will NOT solve anything.

You should try DriverPacks BASE "method 2" instead.

Re: Massstorage Drivers into XP install

null@example.com (Damnation) — Sat, 15 Sep 2012 07:56:07 +0000

HWIDs.TXT

=========== 
PCI Devices 
=========== 
PCI\VEN_197B&DEV_2393&SUBSYS_51021558&REV_90\4&1287F4B9&0&03E1: Base System Device
PCI\VEN_8086&DEV_1C20&SUBSYS_51021558&REV_05\3&11583659&0&D8: High Definition Audio Controller
PCI\VEN_1002&DEV_AA88&SUBSYS_AA881558&REV_00\4&18583ED6&0&0108: High Definition Audio Controller
PCI\VEN_8086&DEV_0101&SUBSYS_51021558&REV_09\3&11583659&0&08: PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_1C22&SUBSYS_51021558&REV_05\3&11583659&0&FB: SM Bus Controller
PCI\VEN_1033&DEV_0194&SUBSYS_51021558&REV_04\4&2B104CD2&0&00E0: Renesas Electronics USB 3.0 Host Controller
PCI\VEN_8086&DEV_0104&SUBSYS_51021558&REV_09\3&11583659&0&00: PCI standard host CPU bridge
PCI\VEN_8086&DEV_1C26&SUBSYS_51021558&REV_05\3&11583659&0&E8: Standard Enhanced PCI to USB Host Controller
PCI\VEN_10EC&DEV_8176&SUBSYS_919610EC&REV_01\4&2F09459&0&00E2: Network Controller
PCI\VEN_8086&DEV_1C03&SUBSYS_51021558&REV_05\3&11583659&0&FA: Standard AHCI 1.0 Serial ATA Controller
PCI\VEN_8086&DEV_1C2D&SUBSYS_51021558&REV_05\3&11583659&0&D0: Standard Enhanced PCI to USB Host Controller
PCI\VEN_197B&DEV_0250&SUBSYS_51021558&REV_05\4&1287F4B9&0&00E1: Ethernet Controller
PCI\VEN_8086&DEV_1C10&SUBSYS_51021558&REV_B5\3&11583659&0&E0: PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_1C3A&SUBSYS_51021558&REV_04\3&11583659&0&B0: PCI Simple Communications Controller
PCI\VEN_197B&DEV_2380&SUBSYS_51021558&REV_30\4&CA6CC07&0&00E3: 1394 OHCI Compliant Host Controller
PCI\VEN_8086&DEV_1C12&SUBSYS_51021558&REV_B5\3&11583659&0&E1: PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_1C49&SUBSYS_51021558&REV_05\3&11583659&0&F8: PCI standard ISA bridge
PCI\VEN_197B&DEV_2391&SUBSYS_51021558&REV_90\4&1287F4B9&0&02E1: SDA Standard Compliant SD Host Controller
PCI\VEN_8086&DEV_1C14&SUBSYS_51021558&REV_B5\3&11583659&0&E2: PCI standard PCI-to-PCI bridge
PCI\VEN_197B&DEV_2392&SUBSYS_51021558&REV_90\4&1287F4B9&0&01E1: Base System Device
PCI\VEN_8086&DEV_1C16&SUBSYS_51021558&REV_B5\3&11583659&0&E3: PCI standard PCI-to-PCI bridge
PCI\VEN_1002&DEV_6720&SUBSYS_51041558&REV_00\4&18583ED6&0&0008: Standard VGA Graphics Adapter
22 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\VID_8087&PID_0024\5&390818D9&0&1                        : Generic USB Hub
USBSTOR\DISK&VEN_M4-CT128&PROD_M4SSD1&REV_0309\000000001152032F68F0&0: M4-CT128 M4SSD1 USB Device
USB\ROOT_HUB20\4&3243450A&0                                 : USB Root Hub
USB\ROOT_HUB20\4&374FC250&0                                 : USB Root Hub
USB\VID_147E&PID_1001\6&2EC8E281&0&5                        : Fingerprint Sensor   
USB\VID_174C&PID_5106\000000001152032F68F0                  : USB Mass Storage Device
USB\VID_5986&PID_0308\6&2EC8E281&0&6                        : USB Composite Device
USB\VID_5986&PID_0308&MI_00\7&1357B643&0&0000               : BisonCam, NB Pro
USB\VID_8087&PID_0024\5&1454A3F9&0&1                        : Generic USB Hub
9 matching device(s) found.
 
============= 
Input Devices 
============= 
No matching devices found.
 
============ 
ACPI Devices 
============ 
ACPI\PNP0F13\4&1AC7E370&0                                   : PS/2 Compatible Mouse
ACPI\INT340E\2&DABA3FF&2                                    : Motherboard resources
ACPI\THERMALZONE\THM0                                       : ACPI Thermal Zone
ACPI\INT3F0D\4&1AC7E370&0                                   : Motherboard resources
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ACPI\PNP0000\4&1AC7E370&0                                   : Programmable interrupt controller
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_5: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\PNP0100\4&1AC7E370&0                                   : System timer
ACPI\PNP0103\0                                              : High precision event timer
ACPI\ACPI0003\2&DABA3FF&2                                   : Microsoft AC Adapter
ACPI\PNP0200\4&1AC7E370&0                                   : Direct memory access controller
ACPI\FIXEDBUTTON\2&DABA3FF&2                                : ACPI Fixed Feature Button
ACPI\PNP0303\4&1AC7E370&0                                   : Standard PS/2 Keyboard
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_6: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_1: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\PNP0A08\0                                              : PCI bus
ACPI\PNP0B00\4&1AC7E370&0                                   : System CMOS/real time clock
ACPI\PNP0C01\1                                              : System board
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI\PNP0C02\10                                             : Motherboard resources
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_7: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_2: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\PNP0C02\2                                              : Motherboard resources
ACPI\PNP0C04\4&1AC7E370&0                                   : Numeric data processor
ACPI\PNP0C09\4&1AC7E370&0                                   : Microsoft ACPI-Compliant Embedded Controller
ACPI\PNP0C0A\2&DABA3FF&2                                    : Microsoft ACPI-Compliant Control Method Battery
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_8: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_3: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ACPI\PNP0C0C\2&DABA3FF&2                                    : ACPI Power Button
ACPI\PNP0C0D\2&DABA3FF&2                                    : ACPI Lid
ACPI\PNP0C0E\2&DABA3FF&2                                    : ACPI Sleep Button
ACPI\PNP0C14\0                                              : Microsoft Windows Management Interface for ACPI
ACPI\INT0800\4&1AC7E370&0                                   : Intel(R) 82802 Firmware Hub Device
ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_______INTEL(R)_CORE(TM)_I7-2760QM_CPU_@_2.40GHZ\_4: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz
ROOT\ACPI_HAL\0000                                          : ACPI x64-based PC
ACPI\PNP0C14\NVIF                                           : Microsoft Windows Management Interface for ACPI
36 matching device(s) found.
 
============ 
 HDA Audio 
============ 
HDAUDIO\FUNC_01&VEN_1002&DEV_AA01&SUBSYS_00AA0100&REV_1002\5&3283ABE1&0&0001: High Definition Audio Device
HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_15585102&REV_1003\4&2BFCB015&0&0001: High Definition Audio Device
2 matching device(s) found.
 
============ 
RAID Devices 
============ 
PCI\VEN_8086&DEV_1C03&SUBSYS_51021558&REV_05\3&11583659&0&FA
    Name: Standard AHCI 1.0 Serial ATA Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_1C03&SUBSYS_51021558&REV_05
        PCI\VEN_8086&DEV_1C03&SUBSYS_51021558
        PCI\VEN_8086&DEV_1C03&CC_010601
        PCI\VEN_8086&DEV_1C03&CC_0106
    Compatible ID's:
        PCI\VEN_8086&DEV_1C03&REV_05
        PCI\VEN_8086&DEV_1C03
        PCI\VEN_8086&CC_010601
        PCI\VEN_8086&CC_0106
        PCI\VEN_8086
        PCI\CC_010601
        PCI\CC_0106
1 matching device(s) found.

This is from a fresh windows 7 install.

I was earlier attempting to install XP on a USB2 port,
Phase 1 passed successfully, but Phase 2 immediately BSODd with

MULTIPLE_IRP_COMPLETE_REQUESTS

its probably the USB3 drivers,

Re: Massstorage Drivers into XP install

null@example.com (Damnation) — Fri, 14 Sep 2012 18:35:58 +0000

DPBASE.LOG

2012-09-14 17:11:37 :  DriverPacks BASE 10.06 initialized.
2012-09-14 17:11:37 :  Host environment: WIN_7 Service Pack 1 X64 on a X64 CPU.
2012-09-14 17:11:37 :  Created temporary working directory.
2012-09-14 17:11:37 :  Imported proxy settings from Internet Explorer.
2012-09-14 17:11:37 :  Start scanning for DriverPacks for the wnt5_x86-32 platform.
2012-09-14 17:11:37 :  	Detected DriverPack Chipset 1206!
2012-09-14 17:11:37 :  	Detected DriverPack Mass Storage 1206!
2012-09-14 17:11:37 :  	Detected 3rd Party DriverPack myUSB3DriverPack 12.09.14.v1.0!
2012-09-14 17:11:37 :  	Finished scanning.
2012-09-14 17:11:37 :  Detected settings file "F:\WINDOWSISO\DPs_BASE_1006\DPs_BASE.ini".
2012-09-14 17:11:37 :  Windows XP Professional -  Retail SP3 detected.
2012-09-14 17:11:37 :  wnt5_x86-32_disc is the selected installation platform .
2012-09-14 17:11:37 :  Imported settings from settings file.
2012-09-14 17:11:37 :  [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2012-09-14 17:11:37 :  [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2012-09-14 17:11:37 :   Initialized GUI.
2012-09-14 17:11:37 :   Created a list of all available language files.
2012-09-14 17:11:37 :   Set the last used language, English, as the GUI language.
2012-09-14 17:11:46 :   Refreshed UpdateChecker with success.
2012-09-14 17:12:28 :   Saved settings!
2012-09-14 17:12:28 :   Closed GUI.
2012-09-14 17:12:28 :   Selected module: mod_slip_wxp_x86-32_disc_m1.
2012-09-14 17:12:29 :  Removed all attributes from \I386.
2012-09-14 17:12:29 :  No previous DriverPacks installation found, Prep stage will be skipped
2012-09-14 17:12:29 :  QuickStream Cache available for DriverPack MassStorage text mode drivers!
2012-09-14 17:12:29 :  F:\WINDOWSISO\DPs_BASE_1006\QSC\wnt5_x86-32_uni_DP_MassStorage_1206_textmode\DriverPack_MassStorage_wnt5_x86-32.ini
2012-09-14 17:12:29 :  Processing Mass Storage files now. This may take a minute.
2012-09-14 17:12:30 :  Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2012-09-14 17:12:30 :  txtsetup.sif Backed-up Successfully
2012-09-14 17:12:30 :  dosnet.inf Backed-up Successfully
2012-09-14 17:12:38 :  Removed entries from \I386\txtsetup.sif that will be updated.
2012-09-14 17:12:39 :  Removed entries from \I386\dosnet.inf that will be updated.
2012-09-14 17:13:34 :  Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2012-09-14 17:13:34 :  QuickStream Cache available for DriverPack Chipset!
2012-09-14 17:13:34 :  QuickStream Cache available for DriverPack Mass Storage!
2012-09-14 17:13:36 :  Extracted 3rd party DriverPack DP_myUSB3DriverPack_wnt5_x86-32_12.09.14.v1.0.7z.
2012-09-14 17:13:36 :  Started CAB compressing 3rd party DriverPack DP_myUSB3DriverPack_wnt... .
2012-09-14 17:13:40 :  Finished CAB compressing 3rd party DriverPack DP_myUSB3DriverPack_wnt... .
2012-09-14 17:13:43 :  Slipstreamed DriverPack Chipset using the QuickStream Cache.
2012-09-14 17:13:46 :  Slipstreamed DriverPack Mass Storage using the QuickStream Cache.
2012-09-14 17:13:46 :  Slipstreamed DriverPack DP_myUSB3DriverPac...  using the QuickStream Cache.
2012-09-14 17:13:47 :  Extracted bin\DPsFnshr.7z to F:\WINDOWSISO\en_windows_xp_professional_with_service_pack_3_x86_cd_vl_x14-73974\$OEM$\$1.
2012-09-14 17:13:47 :  Will not slipstream patches, Service Pack 3 was detected.
2012-09-14 17:13:47 :  Will not slipstream KB888111 because no Sound DriverPack is being slipstreamed
2012-09-14 17:13:47 :  Will not slipstream KB883667 because no Graphics DriverPack is being slipstreamed
2012-09-14 17:13:47 :  Updated \I386\winnt.sif to support method 1.
2012-09-14 17:13:47 :  Created OemPnpDriversPath entry. The length is 1235, which does not exceed the 4096 characters limit.
2012-09-14 17:13:47 :  Added OemPnpDriversPath entry to \I386\winnt.sif.
2012-09-14 17:13:47 :  Updated DPsFnshr.ini to disable KTD.
2012-09-14 17:13:49 :  Updated F:\WINDOWSISO\en_windows_xp_professional_with_service_pack_3_x86_cd_vl_x14-73974\$OEM$\cmdlines.txt to execute ROE.exe.
2012-09-14 17:13:50 :  DP_Install_Tool was copied successfully
2012-09-14 17:13:50 :  Slipstream finished in 1 minutes and 21 seconds.
2012-09-14 17:13:54 :  Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "F:\WINDOWSISO\en_windows_xp_professional_with_service_pack_3_x86_cd_vl_x14-73974"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "1"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "RunOnceEx"


; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID		= "default"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; , to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_MassStorage	= "yes"
DPs_3rd_party	= "yes"
DP_MassStorage_textmode = "yes"
2012-09-14 17:13:54 :  Create a DPs_Base.log backup @ F:\WINDOWSISO\DPs_BASE_1006\LogFiles\DPs_BASE_12-09-14_17-13.log
2012-09-14 17:13:54 :  Program terminated.

gotta go to bed, will get the HWIDs tomorrow

Re: Massstorage Drivers into XP install

null@example.com (mr_smartepants) — Fri, 14 Sep 2012 18:03:15 +0000

That's normal. txtsetup.oem files are ignored by DriverPacks BASE.
Adding USB3 drivers to dpms was already requested. I'll try and put together a test pack but I don't think it will work.
Still waiting for your DPs_BASE.log and HWIDs list...

Re: Massstorage Drivers into XP install

null@example.com (Damnation) — Fri, 14 Sep 2012 09:21:33 +0000

OK So I've got it working properly - at least through USB2 ports

what I would like to do now is inject USB3 driver into the Textmode so it won't give a 0X7B BSOD when in a USB3 port.

I've made a TXTSETUP.OEM file for my Renesas USB3 controller:

[Disks]
disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\

[Defaults]
SCSI=nusb3xhc

[SCSI]
nusb3xhc="Renesas USB3 Controller Driver"
nusb3hub="Renesas USB3 HUB Driver"

[Files.SCSI.nusb3xhc]
driver=disk1,nusb3xhc.sys,nusb3xhc
inf=disk1,nusb3xhc.inf
catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3hub]
driver=disk1,nusb3hub.sys,nusb3hub
inf=disk1,nusb3hub.inf
catalog=disk1,nusb3hub.cat

[HardwareIds.SCSI.nusb3xhc]
id="PCI\VEN_1033&DEV_0194","nusb3xhc"

[HardwareIds.SCSI.nusb3hub]
id="NUSB3\ROOT_HUB30","nusb3hub"
id="NUSB3\CLASS_09","nusb3hub"

in the 3rd party drivers folder.

DP BASE didn't add any entries for them into txtsetup.sif though.

Can anyone help?

Re: Massstorage Drivers into XP install

null@example.com (mr_smartepants) — Thu, 13 Sep 2012 19:20:11 +0000

We don't support nlite. We only support DriverPacks and DriverPacks BASE.
Please start again with a fresh clean untouched XP source and use DriverPacks BASE to inject DriverPacks.
If it still gives you the same error, then report back with DPs_BASE.log and HWID list using the tool in my signature.
If it works fine using DriverPacks BASE but you only get errors when you're using nlite to inject drivers and you have problems, then you need to ask for support from the nlite community.

Short answer: Don't use nlite.

Massstorage Drivers into XP install

null@example.com (Damnation) — Thu, 13 Sep 2012 07:08:12 +0000

I'm using nlite, and am trying to inject Massstorage drivers for my XP installer,

it seems to inject fine, but when I run the installer, it says it cannot find files, and then gives a 7B blue screen

any help?