DriverPacks.net Forum - [SOLVED] Intel SATA RAID not recognized

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (Wim Leers) — Wed, 09 Aug 2006 09:20:42 +0000

rc7 won't have this REMmed out issue anymore. I'm very glad Intel SATA RAID is confirmed to be working again

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (razormoon) — Wed, 09 Aug 2006 02:54:11 +0000

Well...REMing everything but iastor.sys was quite successful. Intel RAID was finally recognized. I'll go on ahead and do a full reinstall tomorrow. Hopefully there will be no issues with the full install. I'm much closer to identifying the conflict now. I just need to get more DVDs.

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (razormoon) — Wed, 09 Aug 2006 02:26:57 +0000

For my first trick...

[SCSI.LOAD]
~
;3ware9k=3ware9k.sys,4
;3ware78k=3ware78k.sys,4
;3waregsm=3waregsm.sys,4
;aec6210=aec6210.sys,4
;aec6260=aec6260.sys,4
;aec6280=aec6280.sys,4
;aec68x5=aec68x5.sys,4
;aec6880=aec6880.sys,4
;aec6897=aec6897.sys,4
;aec67160=aec67160.sys,4
;aec671x=aec671x.sys,4
;ahpt3xx=ahpt3xx.sys,4
;aac=aac.sys,4
;aar1210=aar1210.sys,4
;dpti2o=dpti2o.sys,4
;adpu160m=adpu160m.sys,4
;adpu320=adpu320.sys,4
;aadpu320=aadpu320.sys,4
;a320raid=a320raid.sys,4
;cda1000=cda1000.sys,4
;aarich=aarich.sys,4
;amdbusdr=amdbusdr.sys,4
;arcm_x86=arcm_x86.sys,4
;m5228=m5228.sys,4
;m5281=m5281.sys,4
;m5287=m5287.sys,4
;m5288=m5288.sys,4
;m5289=m5289.sys,4
;cercsr6=cercsr6.sys,4
;hpt3xx=hpt3xx.sys,4
;rhpt3xx=rhpt3xx.sys,4
;hpt374=hpt374.sys,4
;hptmv=hptmv.sys,4
;hpt366=hpt366.sys,4
;hptmv6=hptmv6.sys,4
;rr2320=rr2320.sys,4
;rr404=rr404.sys,4
;rr2310=rr2310.sys,4
;ipsraidn=ipsraidn.sys,4
;nfrd960=nfrd960.sys,4
iastor=iastor.sys,4
;raidsrc=raidsrc.sys,4
;iteraid=iteraid.sys,4
;jahci=jahci.sys,4
;megaide=megaide.sys,4
;mraid35x=mraid35x.sys,4
;dac2w2k=dac2w2k.sys,4
;dac960nt=dac960nt.sys,4
;symmpi=symmpi.sys,4
;nvatabus=nvatabus.sys,4
;nvraid=nvraid.sys,4
;fasttrak=fasttrak.sys,4
;fasttx2k=fasttx2k.sys,4
;aftx2k=aftx2k.sys,4
;s150sx8=s150sx8.sys,4
;fastsx=fastsx.sys,4
;sptrak=sptrak.sys,4
;ulsata=ulsata.sys,4
;ulsata2=ulsata2.sys,4
;ultra=ultra.sys,4
;ql2100=ql2100.sys,4
;ql2200=ql2200.sys,4
;ql2300=ql2300.sys,4
;ql12160=ql12160.sys,4
;pnp949r=pnp949r.sys,4
;pnp680=pnp680.sys,4
;pnp680r=pnp680r.sys,4
;si3112=si3112.sys,4
;si3112r=si3112r.sys,4
;ati3112r=ati3112r.sys,4
;si3114=si3114.sys,4
;si3114r=si3114r.sys,4
;si3114r5=si3114r5.sys,4
;si3124=si3124.sys,4
;si3124r=si3124r.sys,4
;si3124r5=si3124r5.sys,4
;si3132=si3132.sys,4
;si3132r5=si3132r5.sys,4
;sisraid1=sisraid1.sys,4
;sisraid=sisraid.sys,4
;sisraid2=sisraid2.sys,4
;viamraid=viamraid.sys,4
;viapdsk=viapdsk.sys,4
;vmscsi=vmscsi.sys,4

The reason I'm REMing out everything is to be sure the conflict is, in fact, happening in [SCSI.LOAD] section (as opposed to bus extender). I also want to be sure that aliide nor atiide (bus extender) have anything to do with this. If they do, then I can expect the same error even with all drivers REMed out (with the exception of the iastor driver). If this works, then I can go further and make sure the rest of the driverpacks (other than massstorage) work on my system.

If all goes well, then I'll crank out the uaDVDs and unREM 5 drivers at a time til I error out...that way I can narrow it down to the offender.

toodles

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (Wim Leers) — Tue, 01 Aug 2006 19:02:42 +0000

Did it work, razormoon?

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (razormoon) — Wed, 05 Jul 2006 22:54:33 +0000

I previously had this issue and fixed it by REMing out the JAHCI driver. I believe our intel sata issue can be solved in a likewise manner. Being since I currently don't have the time (or DVDs) to test, let me propose this:

REM out all drivers in the [SCSI.LOAD] section ONE BY ONE.

Insert a semicolon ; in front of each driver, test, remove semicolon and repeat on next line.

Example:

[SCSI.Load]
cpqarray = cpqarray.sys,4
;atapi = atapi.sys,4
aha154x = aha154x.sys,4
sparrow = sparrow.sys,4
symc810  = symc810.sys,4
aic78xx  = aic78xx.sys,4
i2omp = i2omp.sys,4
dac960nt = dac960nt.sys,4
ql10wnt = ql10wnt.sys,4
amsint = amsint.sys,4
asc = asc.sys,4

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (Helmi) — Tue, 04 Jul 2006 09:07:03 +0000

razormoon wrote:

Virtual PC does not have hardware support, hence driverpacks will show no effects.

Exactly.

Besides, since I'm using a edicated PC for testing, I can keep working on my primary machien when testing the disk and it doesn't drain any rescources as a VM would do.

I tell you, these RWs are really, really handy

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (razormoon) — Mon, 03 Jul 2006 18:00:39 +0000

Virtual PC does not have hardware support, hence driverpacks will show no effects.

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (twig123) — Sun, 02 Jul 2006 15:26:37 +0000

Helmi wrote:

Lex82 wrote:
I've threw away a lot of CDs trying to get this to work, and really can't afford to waste any more.. not your (Bâshrat the Sneaky's) fault, just that I've wasted about 20 CDs, and 30 DVDs this month trying a lot of things out.. >.<
I know it sounds rather obvious but did you ever consider using a RW disk for these purposes?
I don't know of a single CD/DVD burner that does not support writing to RW media.
So far, I have only burnt maybe two CD-Rs with a UWXPCD, however I have created countless CD-RWs (on the same disk, btw!), which all work very fine.
I have yet to notice a difference to using an R medium instead of an RW (maybe read times are a little bit faster but not as much as to influence installation times noticeable).

...maybe i'm just a n00b or something... but I use MS Virtual PC to test my installs from an ISO BEFORE burning to a CD/DVD... maybe you should consider the same so save some $$, unless you really DO like those nifty coasters

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (Helmi) — Sun, 02 Jul 2006 13:20:26 +0000

Lex82 wrote:

I've threw away a lot of CDs trying to get this to work, and really can't afford to waste any more.. not your (Bâshrat the Sneaky's) fault, just that I've wasted about 20 CDs, and 30 DVDs this month trying a lot of things out.. >.<

I know it sounds rather obvious but did you ever consider using a RW disk for these purposes?
I don't know of a single CD/DVD burner that does not support writing to RW media.

So far, I have only burnt maybe two CD-Rs with a UWXPCD, however I have created countless CD-RWs (on the same disk, btw!), which all work very fine.
I have yet to notice a difference to using an R medium instead of an RW (maybe read times are a little bit faster but not as much as to influence installation times noticeable).

Re: [SOLVED] Intel SATA RAID not recognized

null@example.com (Lex82) — Sat, 01 Jul 2006 08:27:13 +0000

I am having the same problem...
Everything seems to be fine when I look at the logs, when I run xp setup, I even see the sata drivers getting loaded, then after that, it says setup cannot continue because no HDDs are detected.
I have 2 Maxtor DiamondMax 10 Sata1 drives setup as RAID 0 array on Abit IC7-G (revision 2) onboard Intel SATA RAID controller which is the 82801ER. I've tried both Method 1 and Method 2, both have no errors in logs, but same result when I try to setup XP.
I've threw away a lot of CDs trying to get this to work, and really can't afford to waste any more.. not your (Bâshrat the Sneaky's) fault, just that I've wasted about 20 CDs, and 30 DVDs this month trying a lot of things out.. >.<
If there is a fix for this, or if I'm doing anything wrong, which I'm almost certain I'm not, please shine some light into this issue.
I won't go into the proceedure of my ISO to diagnose if I made any n00b mistake. (Such as getting newest BASE, PACKS, folder name, etc)
But if there shouldn't be anything wrong with the massstorage or the chipset DriverPacks, then please do tell me so I can check my steps again.
By the way, your older DriverPacks worked flawlessly when I made my iso build last month or so.
Regardless of this small problem we're having, your DriverPacks are amazing. I can't even imagine all the time and effort you've put into this project and I'd like to thank you for the awesome program.

[SOLVED] Intel SATA RAID not recognized

null@example.com (razormoon) — Tue, 30 May 2006 22:51:42 +0000

I finally slipstreamed an official unattend DVD using the new GUI DPBASE (as opposed to vmware). I'm streaming all DriverPacks (including textmode), M2, Custom and No KTD). I've compared txtsetup.sifs from both batch and gui dpbase' and iastor entries APPEAR fine. I don't even know where to begin to figure this one out. Please help out here ppl.

HWID:

 
=========== 
PCI devices 
=========== 
 
 
PCI\VEN_10DE&DEV_00F9&SUBSYS_025410DE&REV_A2\4&37AD8B77&0&0008: NVIDIA GeForce 6800 Series GPU
PCI\VEN_1106&DEV_3044&SUBSYS_028D1462&REV_46\4&23C0B1C&0&18F0: VIA OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_14E4&DEV_1677&SUBSYS_028C1462&REV_01\4&10CDB71B&0&00E2: Broadcom NetXtreme Gigabit Ethernet
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_D3\3&11583659&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2580&SUBSYS_00000000&REV_04\3&11583659&0&00: Intel(R) 915G/P/GV/GL/PL/910GE/GL Processor to I/O Controller - 2580
PCI\VEN_8086&DEV_2581&SUBSYS_00000000&REV_04\3&11583659&0&08: Intel(R) 915G/P/GV/GL/PL/910GE/GL PCI Express Root Port - 2581
PCI\VEN_8086&DEV_2640&SUBSYS_00000000&REV_03\3&11583659&0&F8: Intel(R) 82801FB LPC Interface Controller - 2640
PCI\VEN_8086&DEV_2652&SUBSYS_70281462&REV_03\3&11583659&0&FA: Intel(R) 82801FR SATA RAID Controller
PCI\VEN_8086&DEV_2658&SUBSYS_70281462&REV_03\3&11583659&0&E8: Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
PCI\VEN_8086&DEV_2659&SUBSYS_70281462&REV_03\3&11583659&0&E9: Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
PCI\VEN_8086&DEV_265A&SUBSYS_70281462&REV_03\3&11583659&0&EA: Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
PCI\VEN_8086&DEV_265B&SUBSYS_70281462&REV_03\3&11583659&0&EB: Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
PCI\VEN_8086&DEV_265C&SUBSYS_70281462&REV_03\3&11583659&0&EF: Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
PCI\VEN_8086&DEV_2660&SUBSYS_00000000&REV_03\3&11583659&0&E0: Intel(R) 82801FB/FBM PCI Express Root Port - 2660
PCI\VEN_8086&DEV_2664&SUBSYS_00000000&REV_03\3&11583659&0&E2: Intel(R) 82801FB/FBM PCI Express Root Port - 2664
PCI\VEN_8086&DEV_2668&SUBSYS_70281462&REV_03\3&11583659&0&D8: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_266A&SUBSYS_70281462&REV_03\3&11583659&0&FB: Intel(R) 82801FB/FBM SMBus Controller - 266A
PCI\VEN_8086&DEV_266F&SUBSYS_70281462&REV_03\3&11583659&0&F9: Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
18 matching device(s) found.
 
 
=========== 
USB devices 
=========== 
 
USB\ROOT_HUB\4&1CFA0043&0                                   : USB Root Hub
USB\ROOT_HUB\4&1F1AA1E6&0                                   : USB Root Hub
USB\ROOT_HUB\4&31EF7094&0                                   : USB Root Hub
USB\ROOT_HUB\4&78AB7D0&0                                    : USB Root Hub
USB\ROOT_HUB20\4&F31A718&0                                  : USB Root Hub
USB\VID_046D&PID_C216\5&29DB93E5&0&2                        : Logitech Dual Action USB
USB\VID_0471&PID_0815\PH00HDWX                              : eHome Infrared Receiver
USB\VID_2040&PID_2900\5&E0FD799&0&4                         : Hauppauge WinTV PVR2 USB2 Encoder
8 matching device(s) found.

BASELOG

2006-05-30 15:46:02 :  DriverPacks BASE 6.05.2 initialized.
2006-05-30 15:46:02 :  Detected settings file.
2006-05-30 15:46:02 :  Imported settings from settings file.
2006-05-30 15:46:02 :  Detected Windows XP Professional SP2 in C:\XPCD.
2006-05-30 15:46:02 :  Detected DriverPack Chipset 6.05!
2006-05-30 15:46:02 :  Detected DriverPack CPU 6.03!
2006-05-30 15:46:02 :  Detected DriverPack Graphics A 6.03!
2006-05-30 15:46:02 :  Detected DriverPack Graphics B 6.03!
2006-05-30 15:46:02 :  Detected DriverPack Graphics C 6.03!
2006-05-30 15:46:02 :  Detected DriverPack LAN 6.05!
2006-05-30 15:46:02 :  Detected DriverPack MassStorage 6.03.1!
2006-05-30 15:46:02 :  Detected DriverPack Sound A 6.03!
2006-05-30 15:46:02 :  Detected DriverPack Sound B 6.03!
2006-05-30 15:46:02 :  Detected DriverPack WLAN 6.05!
2006-05-30 15:46:02 :  Detected 3rd party DriverPack(s).
2006-05-30 15:46:02 :  DriverPacks scanned sucessfully.
2006-05-30 15:46:02 :   Initialized GUI.
2006-05-30 15:46:51 :   Saved settings!
2006-05-30 15:46:51 :   Closed GUI.
2006-05-30 15:46:51 :   Selected module: mod_wxp_x86-32_disc_m2.
2006-05-30 15:46:53 :  Removed all attributes from \I386.
2006-05-30 15:46:53 :  Deleted old DriverPacks.
2006-05-30 15:46:53 :  Deleted old method 2 related files.
2006-05-30 15:46:53 :  Restored original mass storage text mode driver adpu160m.sys.
2006-05-30 15:46:53 :  Restored original mass storage text mode driver aliide.sys.
2006-05-30 15:46:53 :  Restored original mass storage text mode driver dac2w2k.sys.
2006-05-30 15:46:53 :  Restored original mass storage text mode driver dac960nt.sys.
2006-05-30 15:46:53 :  Restored original mass storage text mode driver dpti2o.sys.
2006-05-30 15:46:53 :  Restored original mass storage text mode driver mraid35x.sys.
2006-05-30 15:46:53 :  Restored original mass storage text mode driver ql12160.sys.
2006-05-30 15:46:53 :  Restored original mass storage text mode driver ultra.sys.
2006-05-30 15:46:53 :  Deleted old DriverPack MassStorage text mode drivers.
2006-05-30 15:46:53 :  Restored \I386\winnt.sif.
2006-05-30 15:46:53 :  Restored \I386\txtsetup.sif.
2006-05-30 15:46:53 :  Restored \I386\dosnet.inf.
2006-05-30 15:46:53 :  Restored original setup: method 2 was used previously.
2006-05-30 15:46:54 :  Cleaned up \$OEM$\cmdlines.txt.
2006-05-30 15:46:54 :  Created temporary working directory.
2006-05-30 15:46:54 :  Extracted necessary files for method 2.
2006-05-30 15:46:54 :  Created necessary directory structure for method 2.
2006-05-30 15:46:54 :  Copied files necessary for method 2.
2006-05-30 15:47:01 :  Copied DriverPacks to \OEM.
2006-05-30 15:47:01 :  English UpdatePack detected: no HDA hotfix will be slipstreamed.
2006-05-30 15:47:01 :  QuickStream Cache available for DriverPack MassStorage text mode drivers!
2006-05-30 15:47:02 :  Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2006-05-30 15:47:13 :  Removed entries from \I386\txtsetup.sif that will be updated.
2006-05-30 15:47:15 :  Removed entries from \I386\dosnet.inf that will be updated.
2006-05-30 15:48:46 :  Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2006-05-30 15:48:47 :  Deleted old presetup.cmd file from \I386.
2006-05-30 15:48:47 :  Created \I386\presetup.cmd file.
2006-05-30 15:48:47 :  Updated \I386\txtsetup.sif to support method 2.
2006-05-30 15:48:48 :  Updated \I386\dosnet.inf to support method 2.
2006-05-30 15:48:48 :  Updated \I386\winnt.sif to support method 2.
2006-05-30 15:48:48 :  Slipstream finished in 2 minutes and 2 seconds.
2006-05-30 15:49:03 :  Temporary working directory successfully deleted.
2006-05-30 15:49:03 : Program terminated.

I tried a CLEAN slipstream with the above issue. This log is from a second slipstream on top of the first.