<![CDATA[DriverPacks.net Forum - [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?id=573 Mon, 22 Jan 2007 20:07:24 +0000 PunBB <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=7604#p7604 EDIT

Then this topic can now be closed. If somebody else still experiences this issue, start a new topic.

]]> Mon, 22 Jan 2007 20:07:24 +0000 http://forum.driverpacks.net/viewtopic.php?pid=7604#p7604 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=7136#p7136 Hi Bâshrat, thx for quick reply smile

My time on this is limited to a couple of hours in the evenings, but I'm at it again now. I suspect the reason to be my incautiousness regarding the order of which the different programs is executed by RunOnceEx. Currently I'm compiling a new DVD and I'll be back in an hour or so with feedback..

Update:
And my suspicions was right; I'm now running the finisher before any other software and it works like a charm big_smile

As of the problems described earlier in this thread, niche99 should respond to verify that his problem still exists..

From my custom BASE.ini ("009" is before any of my entries):

[RunOnceExSettings]
startID		= "custom"
customStartID	= "009"
]]> Tue, 09 Jan 2007 18:13:51 +0000 http://forum.driverpacks.net/viewtopic.php?pid=7136#p7136 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=7108#p7108 @Pedro80: thank you very much for the detailed report! After scanning through all previous posts, the general rule seems to be that you're all using RunOnceEx as the Finisher method. Now this itself shouldn't be the cause of this problem. I think the problem would lie in some of the other programs you're running. Are you running ANY program that COULD possibly perform a clean-up before the Finisher gets executed? Such as WPI or XPlode for example, or a self-written batch file?

If that's NOT the cause, then it must be the system variable that cannot be imported or something. Would you like to do another test run with a custom DriverPacks Finisher that logs the values of the system variables (%SystemDrive% in particular of course)?

EDIT: is now implemented by default in the next update of the DriverPacks Finisher!

]]> Mon, 08 Jan 2007 21:36:25 +0000 http://forum.driverpacks.net/viewtopic.php?pid=7108#p7108 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=7107#p7107 Hi guys, when I saw this topic I had to register.
Greets to Bâshrat for this most awesome slipstreamer!

I see this topic has been neglected for some time, I'm getting the same error as the others in this thread and was hoping to bounce it up..

I'm using:
- VMware 5.5
- XP pro SP2
- RVM integrator
- DriverPacks BASE 7.01.1
- All but Graphics pack C
- M2
- ROE finisher method

I have verified that the "%systemdrive%\D"-structure is in place before the Finisher runs.

*) note: I'm aware of the Mass storage bug in 7.01.1 causing the mass storage drivers to not be slipstreamed textmode (the observant can see this from my DPs_BASE.log). As of now I don't care about this, I just want to get a hang of how to use this slipstreamer (hopefylly the bug is corrected by the time I have things in order tongue )


DPs_BASE.log

2007-01-08 22:13:28 : <GUI>  Closed GUI.
2007-01-08 22:13:28 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2007-01-08 22:13:30 : <PREP> Removed all attributes from \I386.
2007-01-08 22:13:30 : <PREP> Created a backup of \I386\winnt.sif.
2007-01-08 22:13:30 : <PREP> Created a backup of \I386\txtsetup.sif.
2007-01-08 22:13:30 : <PREP> Created a backup of \I386\dosnet.inf.
2007-01-08 22:13:41 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2007-01-08 22:13:41 : <PREP> Created temporary working directory.
2007-01-08 22:13:41 : <SLIP> Created necessary directory structure for method 2.
2007-01-08 22:13:41 : <SLIP> Copied files necessary for method 2.
2007-01-08 22:13:41 : <SLIP> Extracted files necessary for method 2.
2007-01-08 22:13:41 : <SLIP> Created \I386\presetup.cmd file.
2007-01-08 22:13:42 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2007-01-08 22:13:42 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2007-01-08 22:14:11 : <SLIP> Copied DriverPacks to \OEM.
2007-01-08 22:14:12 : <SLIP> Extracted and deleted \I386\svcpack.in_.
2007-01-08 22:14:12 : <SLIP> Updated \I386\svcpack.inf file to support KB888111 and KB921401.
2007-01-08 22:14:13 : <SLIP> Updated \I386\txtsetup.sif file to support KB888111.
2007-01-08 22:14:14 : <SLIP> Updated \I386\dosnet.inf file to support KB888111.
2007-01-08 22:14:15 : <SLIP> Updated \I386\dosnet.inf file to support KB921401.
2007-01-08 22:14:16 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2007-01-08 22:14:16 : <SLIP> Updated \I386\winnt.sif to support method 2.
2007-01-08 22:14:16 : <SLIP> Updated DPsFnshr.ini to enable KTD.
2007-01-08 22:14:17 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2007-01-08 22:14:17 : <SLIP> Slipstream finished in 49 seconds.
2007-01-08 22:14:54 : <CLNP> Temporary working directory successfully deleted.
2007-01-08 22:14:54 : Program terminated.

DPsFnshr.ini (as you see I'm trying to use KTD patterns)

[Settings]
; DO NOT SET THIS MANUALLY, LET THE DriverPacks BASE DO IT FOR YOU! (may NOT contain any spaced, if it does, all exceptions must be adapted to be compatible!)
DPsRoot	= "%SystemDrive%"
; DO NOT SET THIS MANUALLY, LET THE DriverPacks BASE DO IT FOR YOU!
KTD = "patterns:1394\;DOT4PRT\;FlashMedia\;HID\;LPTENUM\;Monitor\;PCMCIA\;SERENUM\;USB\;USBPRINT\"
; system variables supported: %SystemDrive%, %SystemRoot% and %WinDir%, one
; location cannot be used as KTDlocation: the root directory specified in
; [Settings]\DPsRoot
KTDlocation	= "%SystemRoot%\DriverPacks"
; enables/disables debug mode (enabled by default)
debug = "true"

<SKIPPNG THE REST TO SAVE FORUM SIZE>

DPsFnshr.log

2007-01-08 18:25:53 : <INIT> DriverPacks Finisher 7.01.1 initialized.
2007-01-08 18:25:53 : <INIT> Splash screen initialized.
2007-01-08 18:25:53 : <INIT> Detected platform wnt5_x86-32.
2007-01-08 18:25:53 : <INIT> Start logging of the HWIDs for relevant devices present in this system.
2007-01-08 18:25:53 : <INIT> 1. ACPI devices
<SKIPPED TO SAVE FORUM SIZE, STANDARD VMware HWID's>
2007-01-08 18:25:53 : <INIT> 2. PCI devices
<SKIPPED TO SAVE FORUM SIZE, STANDARD VMware HWID's>
2007-01-08 18:25:54 : <INIT> 3. HDAUDIO devices
<SKIPPED TO SAVE FORUM SIZE, STANDARD VMware HWID's>
2007-01-08 18:25:54 : <INIT> 4. USB devices
<SKIPPED TO SAVE FORUM SIZE, STANDARD VMware HWID's>
2007-01-08 18:25:54 : <INIT> Logging of HWIDs complete.
2007-01-08 18:25:54 : <CRIT>    The DriverPacks root directory in the settings file doesn't contain a valid DriverPacks directory structure!
2007-01-08 18:25:59 : <CLNP> Deleted "C:\DPsFnshr.ini"!
2007-01-08 18:25:59 : <CLNP> Deleted "C:\devcon.exe"!
2007-01-08 18:25:59 : <CLNP> Deleted "C:\makePNF.exe"!
2007-01-08 18:25:59 : <CLNP> Deleted "C:\pmtimer.exe"!
2007-01-08 18:25:59 : <CLNP> Deleted "C:\ATICCP.ins"!
2007-01-08 18:25:59 : <CLNP> Deleted "C:\DSPdsblr.exe"!
2007-01-08 18:25:59 : <CLNP> Added new value to the RunOnce key in the registry: the DriverPacks Finisher itself will get deleted after the next reboot.
2007-01-08 18:25:59 : Program terminated.
]]> Mon, 08 Jan 2007 21:22:59 +0000 http://forum.driverpacks.net/viewtopic.php?pid=7107#p7107 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5530#p5530 i wonder if DPsRoot should be "%SystemDrive%\d"

]]> Mon, 23 Oct 2006 07:30:45 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5530#p5530 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5430#p5430 I have the same problem.

DPsFnshr.log

2006-10-06 21:20:56 : <INIT> DriverPacks Finisher 6.10 initialized.
2006-10-06 21:20:56 : <INIT> Splash screen initialized.
2006-10-06 21:20:56 : <INIT> Detected platform wnt5_x86-32.
2006-10-06 21:20:56 : <INIT> Start logging of the HWIDs for relevant devices present in this system.
2006-10-06 21:20:56 : <INIT> 1. ACPI devices

ACPI\ACPI0003\1                                             : ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_35\_0               : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI\PNP0001\4&5289E18&0                                    : ACPI\PNP0100\4&5289E18&0                                    : ACPI\PNP0200\4&5289E18&0                                    : ACPI\PNP0303\4&5289E18&0                                    : ACPI\PNP0400\5&324D5432&0                                   : ACPI\PNP0501\1                                              : ACPI\PNP0501\2                                              : ACPI\PNP0700\5&324D5432&0                                   : ACPI\PNP0800\4&5289E18&0                                    : ACPI\PNP0A03\2&DABA3FF&0                                    : ACPI\PNP0A05\4&5289E18&0                                    : ACPI\PNP0B00\4&5289E18&0                                    : CMOS ACPI\PNP0C02\1F                                             : ACPI\PNP0F13\4&5289E18&0                                    : VMware Pointing Device
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-ROOT\ACPI_HAL\0000                                          : 19 matching device(s) found.

2006-10-06 21:20:57 : <INIT> 2. PCI devices

PCI\VEN_104B&DEV_1040&SUBSYS_1040104B&REV_01\3&61AAA01&0&80 : VMware SCSI Controller
PCI\VEN_1274&DEV_1371&SUBSYS_13711274&REV_02\3&61AAA01&0&88 : PCI\VEN_15AD&DEV_0405&SUBSYS_040515AD&REV_00\3&61AAA01&0&78 : VMware SVGA II
PCI\VEN_8086&DEV_7110&SUBSYS_00000000&REV_08\3&61AAA01&0&38 : Intel 82371AB/EB PCI - ISA PCI\VEN_8086&DEV_7111&SUBSYS_197615AD&REV_01\3&61AAA01&0&39 : Intel(R) 82371AB/EB PCI Bus Master IDE PCI\VEN_8086&DEV_7112&SUBSYS_197615AD&REV_00\3&61AAA01&0&3A : Intel(r) 82371AB/EB PCI - USB PCI\VEN_8086&DEV_7190&SUBSYS_00000000&REV_01\3&61AAA01&0&00 : Intel 82443BX Pentium® II CPU - PCI PCI\VEN_8086&DEV_7191&SUBSYS_00000000&REV_01\3&61AAA01&0&08 : Intel 82443BX Pentium® II CPU - AGP 8 matching device(s) found.

2006-10-06 21:20:57 : <INIT> 3. HDAUDIO devices

No matching devices found.

2006-10-06 21:20:57 : <INIT> 4. USB devices

USB\ROOT_HUB\4&3788CC09&0                                   : 1 matching device(s) found.

2006-10-06 21:20:57 : <INIT> Logging of HWIDs complete.
2006-10-06 21:20:57 : <CRIT> The DriverPacks root directory in the settings file doesn't contain a valid DriverPacks directory structure!
2006-10-06 21:21:02 : <CLNP> Deleted "C:\DPsFnshr.ini"!
2006-10-06 21:21:02 : <CLNP> Deleted "C:\devcon.exe"!
2006-10-06 21:21:02 : <CLNP> Deleted "C:\makePNF.exe"!
2006-10-06 21:21:02 : <CLNP> Deleted "C:\pmtimer.exe"!
2006-10-06 21:21:02 : <CLNP> Deleted "C:\ATICCC.ins"!
2006-10-06 21:21:02 : <CLNP> Deleted "C:\DSPdsblr.exe"!
2006-10-06 21:21:02 : <CLNP> Added new value to the RunOnce key in the registry: the DriverPacks Finisher itself will get deleted after the next reboot.
2006-10-06 21:21:02 : Program terminated.

DPsFnshr.ini

[Settings]
; DO NOT SET THIS MANUALLY, LET THE DriverPacks BASE DO IT FOR YOU! (may NOT contain any spaced, if it does, all exceptions must be adapted to be compatible!)
DPsRoot	= "%SystemDrive%"
; DO NOT SET THIS MANUALLY, LET THE DriverPacks BASE DO IT FOR YOU!
KTD	= "paths:D"
; system variables supported: %SystemDrive%, %SystemRoot% and %WinDir%, one
; location cannot be used as KTDlocation: the root directory specified in
; [Settings]\DPsRoot
KTDlocation	= "%SystemRoot%\DriverPacks"


; =============================================================================
;
; REMARKS
;
; =============================================================================
; -----------------------------------------------------------------------------
; About adding your own exceptions
; -----------------------------------------------------------------------------
;
; - The following system variables are supported:
;  * %SystemDrive%
;  * %SystemRoot%
;  * %WinDir%
;  * %ProgramFiles%
;  * %DPSROOT% (equals the value of [Settings]\DPsRoot)
;  * %DPSTMP% (when you must extract files for example)
;
; - Available executables:
;  * addUsepmtimer.exe
;  * devcon.exe
;
; - The unique ID in the sectionnames (i.e.: [<OS platform>__<unique ID>__
;   <driver dir, including the master 'D' dir>]) must NOT be sequential, it
;   must just be unique. Only numbers (0-9) can be used. The reason for the
;   existence of this string is that sometimes there are multiple exceptions
;   for the same driver, which would result in identical section names, which
;   is not allowed.
;
; - A requirement of the type 'tagFiles' is considered forfilled if ALL of the
;   listed conditions are met.
;
; - A requirement of the types '+hwids', '-hwids', '+infFiles' and '-infFiles'
;   is considered forfilled if ANY of the listed conditions is met.
;
; - The commands will ONLY be executed if ALL the active requirements are
;
; - The commands will be executed in the order they are entered.
;
;
; -----------------------------------------------------------------------------
; About the implementation of KTD
; -----------------------------------------------------------------------------
;
; - To optimize the DevicePath entry in the registry (to allow more drivers to
;   be added), a new system variable will be created, which will accessible
;   through the variable %KTD%. The result is that each path that is added
;   (that refers to a driver), will be much shorter - and therefore this allows
;   more drivers to be added.
;
; =============================================================================

[wnt5_x86-32__0000__D]
tagFiles	= 0
+hwids		= 1
+hwid1		= "ACPI\MGMT180"
-hwids		= 0
+infFiles	= 0
-infFiles	= 0
commands	= 1
command1	= "%SystemDrive%\devcon.exe remove ACPI\MGMT180"


[wnt5_x86-32__0001__D-CP]
tagFiles	= 0
+hwids		= 1
+hwid1		= "ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_35"
-hwids		= 0
+infFiles	= 0
-infFiles	= 0
commands	= 1
command1	= "%SystemDrive%\pmtimer.exe"


[wnt5_x86-32__0002__D-G-A-1]
tagFiles	= 2
tagFile1	= "%SystemDrive%\ATICCC.ins"
tagFile2	= "%DPSROOT%\D\G\A\1\ATICCC.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\1\*.inf"
-infFiles	= 0
commands	= 6
command1	= "%DPSROOT%\D\G\A\1\ATICCC.exe -y -o%DPSTMP%"
command2	= "msiexec /i %DPSTMP%\ISScript9.Msi /qn /norestart"
command3	= "?processWaitClose:ISScript9.Msi"
command4	= "msiexec /i %DPSTMP%\ATICCC.msi /qn /norestart"
command5	= "?processWaitClose:ATICCC.msi"
command6	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0003__D-G-A-1]
tagFiles	= 2
tagFile1	= "%SystemDrive%\ATICCP.ins"
tagFile2	= "%DPSROOT%\D\G\A\1\ATICCP.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\1\*.inf"
-infFiles	= 0
commands	= 3
command1	= "%DPSROOT%\D\G\A\1\ATICCP.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\Setup.exe /K"
command3	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0004__D-G-A-2]
tagFiles	= 1
tagFile1	= "%DPSROOT%\D\G\A\2\CPanel.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\2\*.inf"
-infFiles	= 0
commands	= 3
command1	= "%DPSROOT%\D\G\A\2\CPanel.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\setup.exe /K"
command3	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0005__D-G-A-5]
tagFiles	= 2
tagFile1	= "%SystemDrive%\ATICCP.ins"
tagFile2	= "%DPSROOT%\D\G\A\1\ATICCP.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\5\*.inf"
-infFiles	= 0
commands	= 3
command1	= "%DPSROOT%\D\G\A\1\ATICCP.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\Setup.exe /K"
command3	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0006__D-G-A-5]
tagFiles	= 2
tagFile1	= "%SystemDrive%\ATICCC.ins"
tagFile2	= "%DPSROOT%\D\G\A\1\ATICCC.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\5\*.inf"
-infFiles	= 0
commands	= 6
command1	= "%DPSROOT%\D\G\A\1\ATICCC.exe -y -o%DPSTMP%"
command2	= "msiexec /i %DPSTMP%\ISScript9.Msi /qn /norestart"
command3	= "?processWaitClose:ISScript9.Msi"
command4	= "msiexec /i %DPSTMP%\ATICCC.msi /qn /norestart"
command5	= "?processWaitClose:ATICCC.msi"
command6	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0007__D-G-3-1]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\3dfxV2ps.dll"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\3\1\*.inf"
-infFiles	= 0
commands	= 1
command1	= "%DPSROOT%\D\G\3\1\V2_OC_control_panel.exe"


[wnt5_x86-32__0008__D-L-NV-123]
tagFiles	= 0
+hwids		= 1
+hwid1		= "PCI\VEN_10DE&DEV_00DF&SUBSYS_E0001458&REV_A2"
+hwid2		= "PCI\VEN_10DE&DEV_00DF&SUBSYS_02501462&REV_A2"
+hwid3		= "PCI\VEN_10DE&DEV_00DF&SUBSYS_A5511297&REV_A2"
-hwids		= 0
+infFiles	= 0
-infFiles	= 0
commands	= 2
command1	= "%SystemDrive%\devcon.exe update %DPSROOT%\D\L\NV\123\nvnetbus.inf "PCI\VEN_10DE&DEV_00DF&SUBSYS_*""
command2 	= "%SystemDrive%\devcon.exe update %DPSROOT%\D\L\NV\123\nvnetfd.inf "{1a3e09be-1e45-494b-9174-d7385b45bbf5}\NVNET_DEV00DF""



[wnt5_x86-32__0009__D-S-CR-1]
tagFiles	= 2
tagFile1	= "%SystemRoot%\system32\drivers\ha20x2k.sys"
tagFile2	= "%DPSROOT%\D\S\CR\1\Ctzapxx.ini"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\CR\1\*.inf"
-infFiles	= 0
commands	= 19
command1	= "expand -r %DPSROOT%\D\S\CR\1\*.* %DPSROOT%\CR\1"
command2	= "expand -r %DPSROOT%\D\S\CR\1\common\*.* %DPSROOT%\D\S\CR\1\common"
command3	= "expand -r %DPSROOT%\D\S\CR\1\common\i386\*.* %DPSROOT%\D\S\CR\1\common\i386"
command4	= "expand -r %DPSROOT%\D\S\CR\1\lang\*.* %DPSROOT%\D\S\CR\1\lang"
command5	= "expand -r %DPSROOT%\D\S\CR\1\lang\i386\*.* %DPSROOT%\D\S\CR\1\lang\i386"
command6	= "expand -r %DPSROOT%\D\S\CR\1\win2k_xp\*.* %DPSROOT%\D\S\CR\1\win2k_xp"
command7	= "expand -r %DPSROOT%\D\S\CR\1\win2k_xp\data\*.* %DPSROOT%\D\S\CR\1\win2k_xp\data"
command8	= "expand -r %DPSROOT%\D\S\CR\1\win2k_xp\i386\*.* %DPSROOT%\D\S\CR\1\win2k_xp\i386"
command9	= "del /q %DPSROOT%\D\S\CR\1\*.??_"
command10	= "del /q %DPSROOT%\D\S\CR\1\common\*.??_"s
command11	= "del /q %DPSROOT%\D\S\CR\1\common\i386\*.??_"
command12	= "del /q %DPSROOT%\D\S\CR\1\lang\*.??_"
command13	= "del /q %DPSROOT%\D\S\CR\1\lang\i386\*.??_"
command14	= "del /q %DPSROOT%\D\S\CR\1\win2k_xp\*.??_"
command15	= "del /q %DPSROOT%\D\S\CR\1\win2k_xp\data\*.??_"
command16	= "del /q %DPSROOT%\D\S\CR\1\win2k_xp\i386\*.??_"
command17	= "copy /y %DPSROOT%\D\S\CR\1\common\i386\CtCtlPan.cpl %SystemRoot%\system32\"
command18	= "copy /y %DPSROOT%\D\S\CR\1\common\i386\CtPanel.exe %SystemRoot%\system32\"
command19	= "start /wait %DPSROOT%\D\S\CR\1\CTZAPXX.exe /S"


[wnt5_x86-32__0010__D-S-CR-2]
tagFiles	= 3
tagFile1	= "%SystemRoot%\system32\drivers\ha10kx2k.sys"
tagFile2	= "%SystemRoot%\system32\drivers\ha20x2k.sys"
tagFile3	= "%DPSROOT%\D\S\CR\2\Ctzapxx.ini"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\CR\2\*.inf"
-infFiles	= 0
commands	= 19
command1	= "expand -r %DPSROOT%\D\S\CR\2\*.* %DPSROOT%\CR\2"
command2	= "expand -r %DPSROOT%\D\S\CR\2\common\*.* %DPSROOT%\D\S\CR\2\common"
command3	= "expand -r %DPSROOT%\D\S\CR\2\common\i386\*.* %DPSROOT%\D\S\CR\2\common\i386"
command4	= "expand -r %DPSROOT%\D\S\CR\2\lang\*.* %DPSROOT%\D\S\CR\2\lang"
command5	= "expand -r %DPSROOT%\D\S\CR\2\lang\i386\*.* %DPSROOT%\D\S\CR\2\lang\i386"
command6	= "expand -r %DPSROOT%\D\S\CR\2\win2k_xp\*.* %DPSROOT%\D\S\CR\2\win2k_xp"
command7	= "expand -r %DPSROOT%\D\S\CR\2\win2k_xp\data\*.* %DPSROOT%\D\S\CR\2\win2k_xp\data"
command8	= "expand -r %DPSROOT%\D\S\CR\2\win2k_xp\i386\*.* %DPSROOT%\D\S\CR\2\win2k_xp\i386"
command9	= "del /q %DPSROOT%\D\S\CR\2\*.??_"
command10	= "del /q %DPSROOT%\D\S\CR\2\common\*.??_"
command11	= "del /q %DPSROOT%\D\S\CR\2\common\i386\*.??_"
command12	= "del /q %DPSROOT%\D\S\CR\2\lang\*.??_"
command13	= "del /q %DPSROOT%\D\S\CR\2\lang\i386\*.??_"
command14	= "del /q %DPSROOT%\D\S\CR\2\win2k_xp\*.??_"
command15	= "del /q %DPSROOT%\D\S\CR\2\win2k_xp\data\*.??_"
command16	= "del /q %DPSROOT%\D\S\CR\2\win2k_xp\i386\*.??_"
command17	= "copy /y %DPSROOT%\D\S\CR\2\common\i386\CtCtlPan.cpl %SystemRoot%\system32\"
command18	= "copy /y %DPSROOT%\D\S\CR\2\common\i386\CtPanel.exe %SystemRoot%\system32\"
command19	= "start /wait %DPSROOT%\D\S\CR\2\CTZAPXX.exe /S"


[wnt5_x86-32__0011__D-S-CR-3]
tagFiles	= 2
tagFile1	= "%SystemRoot%\system32\drivers\P17.sys"
tagFile2	= "%DPSROOT%\D\S\CR\3\Ctzapxx.ini"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\CR\3\*.inf"
-infFiles	= 0
commands	= 14
command1	= "expand -r %DPSROOT%\D\S\CR\3\*.* %DPSROOT%\CR\3"
command2	= "expand -r %DPSROOT%\D\S\CR\3\AddOn\*.* %DPSROOT%\D\S\CR\3\AddOn"
command3	= "expand -r %DPSROOT%\D\S\CR\3\common\*.* %DPSROOT%\D\S\CR\3\common"
command4	= "expand -r %DPSROOT%\D\S\CR\3\Lang\i386\*.* %DPSROOT%\D\S\CR\3\Lang\i386"
command6	= "expand -r %DPSROOT%\D\S\CR\3\Win2K_XP\*.* %DPSROOT%\D\S\CR\3\Win2K_XP"
command7	= "expand -r %DPSROOT%\D\S\CR\3\Win2K_XP\i386\*.* %DPSROOT%\D\S\CR\3\Win2K_XP\i386"
command8	= "del /q %DPSROOT%\D\S\CR\3\*.??_"
command9	= "del /q %DPSROOT%\D\S\CR\3\Addon\*.??_"
command10	= "del /q %DPSROOT%\D\S\CR\3\common\*.??_"
command11	= "del /q %DPSROOT%\D\S\CR\3\Lang\i386\*.??_"
command12	= "del /q %DPSROOT%\D\S\CR\3\Win2K_XP\*.??_"
command13	= "del /q %DPSROOT%\D\S\CR\3\Win2k_XP\i386\*.??_"
command14	= "start /wait %DPSROOT%\D\S\CR\3\CTZapxx.Exe /S"


[wnt5_x86-32__0012__D-S-H-2]
tagFiles	= 0
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\H\2.inf"
-infFiles	= 0
commands	= 4
command1	= "%SystemDrive%\devcon.exe disable =net"
command2	= "%SystemDrive%\devcon.exe updateni %DPSROOT%\D\S\H\2\wdmaherc.inf "PCI\VEN_1013&DEV_6003&SUBSYS_*""
command3	= "%SystemDrive%\devcon.exe updateni %DPSROOT%\D\S\H\2\wdmaherc.inf "HERCULES\*""
command4	= "%SystemDrive%\devcon.exe enable =net"


[wnt5_x86-32__0013__D-S-N]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\nvapu.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\N\*.inf"
-infFiles	= 0
commands	= 3
command1	= "start /wait %DPSROOT%\D\S\N\AudioUtl.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\Setup.exe -s -f1"
command3	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0014__D-S-S-U]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\sthda.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\S\U\3\*.inf"
-infFiles	= 0
commands	= 6
command1	= "copy /y %DPSROOT%\D\S\S\U\stlang.dll %SystemRoot%\system32"
command2	= "copy /y %DPSROOT%\D\S\S\U\stacgui.dll %SystemRoot%\system32"
command3	= "copy /y %DPSROOT%\D\S\S\U\stacgui.cpl %SystemRoot%\system32"
command4	= "md "%ProgramFiles%\Sigmatel\C-Major Audio\STACGUI""
command5	= "copy /y %DPSROOT%\D\S\S\U\sttray.exe "%ProgramFiles%\Sigmatel\C-Major Audio\STACGUI""
command6	= "copy /y %DPSROOT%\D\S\S\U\stlang.dll "%ProgramFiles%\Sigmatel\C-Major Audio\WDM""


[wnt5_x86-32__0015__D-S-SI-1]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\sis7012.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\SI\1\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\SI\1\SI_7012.exe x -y o%SystemRoot%\"


[wnt5_x86-32__0016__D-S-SI-2]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\sis7018.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\SI\2\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\SI\2\SI_7018.exe x -y o%SystemRoot%\"


[wnt5_x86-32__0017__D-S-T-2]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\FM801.sys"
tagFile1	= "%DPSROOT%\D\S\T\2\Setup.ex_"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\T\2\*.inf"
-infFiles	= 0
commands	= 3
command1	= "expand -r %DPSROOT%\D\S\T\2\*.* %DPSROOT%\D\S\T\2"
command2	= "del /q %DPSROOT%\D\S\T\2\*.??_"
command3	= "start /wait %DPSROOT%\D\S\T\2\Setup.exe /S"


[wnt5_x86-32__0018__D-S-T-3]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\cmaudio.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\T\3\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\T\3\T_3.exe"

[wnt5_x86-32__0019__D-S-T-4]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\TT1724ht.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\T\4\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\T\4\T_SSU.exe"


[wnt5_x86-32__0020__D-S-T-5]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\dmxsens.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\T\5\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\T\5\T_DMX.exe"


[wnt5_x86-32__0021__D-S-V-1]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\envysens.sys"
tagFile1	= "%DPSROOT%\D\S\V\1\V_ENVY.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\V\1\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\V\1\V_ENVY.exe -y -o%SystemRoot%\"


[wnt5_x86-32__0022__D-S-V-2]
tagFiles	= 2
tagFile1	= "%SystemRoot%\system32\drivers\vinyl97.sys"
tagFile2	= "%DPSROOT%\D\S\V\2\V_VINYL.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\V\2\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\V\2\V_VINYL.exe -y -o%SystemRoot%\"
]]> Fri, 20 Oct 2006 14:59:07 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5430#p5430 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5423#p5423 Thank you for your prompt response

DPsFnshr.log

2006-10-20 10:53:40 : <INIT> DriverPacks Finisher 6.08.6 initialized.
2006-10-20 10:53:40 : <INIT> Detected platform wnt5_x86-32.
2006-10-20 10:53:40 : <INIT> Start logging of the HWIDs for relevant devices present in this system.
2006-10-20 10:53:40 : <INIT> 1. ACPI devices

ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_1\_0                : Intel(R) Pentium(R) 4 CPU 1.50GHz
ACPI\INT0800\4&3976BCDA&0                                   : Intel(R) 82802 Firmware Hub Device
ACPI\PNP0000\4&3976BCDA&0                                   : Programmable interrupt controller
ACPI\PNP0100\4&3976BCDA&0                                   : System timer
ACPI\PNP0200\4&3976BCDA&0                                   : Direct memory access controller
ACPI\PNP0303\4&3976BCDA&0                                   : PS/2 Keyboard (106 key)
ACPI\PNP0400\4&3976BCDA&0                                   : Printer Port (LPT1)
ACPI\PNP0501\1                                              : Communications Port (COM1)
ACPI\PNP0501\2                                              : Communications Port (COM2)
ACPI\PNP0700\4&3976BCDA&0                                   : Standard floppy disk controller
ACPI\PNP0800\4&3976BCDA&0                                   : System speaker
ACPI\PNP0A03\0                                              : PCI bus
ACPI\PNP0B00\4&3976BCDA&0                                   : System CMOS/real time clock
ACPI\PNP0C01\1                                              : System board
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI\PNP0C02\2                                              : Motherboard resources
ACPI\PNP0C04\4&3976BCDA&0                                   : Numeric data processor
ACPI\PNP0F03\4&3976BCDA&0                                   : PS/2 Compatible Mouse
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Uniprocessor PC
21 matching device(s) found.

2006-10-20 10:53:41 : <INIT> 2. PCI devices

PCI\VEN_8086&DEV_1039&SUBSYS_30138086&REV_81\4&2AF9ED5&0&40F0: Intel(R) PRO/100 VE Network Connection
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_81\3&267A616A&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_24C0&SUBSYS_00000000&REV_01\3&267A616A&0&F8: Intel(R) 82801DB LPC Interface Controller - 24C0 
PCI\VEN_8086&DEV_24C2&SUBSYS_4C598086&REV_01\3&267A616A&0&E8: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
PCI\VEN_8086&DEV_24C3&SUBSYS_4C598086&REV_01\3&267A616A&0&FB: Intel(R) 82801DB/DBM SMBus Controller - 24C3 
PCI\VEN_8086&DEV_24C4&SUBSYS_4C598086&REV_01\3&267A616A&0&E9: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
PCI\VEN_8086&DEV_24C5&SUBSYS_03028086&REV_01\3&267A616A&0&FD: SigmaTel C-Major Audio
PCI\VEN_8086&DEV_24C7&SUBSYS_4C598086&REV_01\3&267A616A&0&EA: Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
PCI\VEN_8086&DEV_24CB&SUBSYS_4C598086&REV_01\3&267A616A&0&F9: Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
PCI\VEN_8086&DEV_24CD&SUBSYS_4C598086&REV_01\3&267A616A&0&EF: Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
PCI\VEN_8086&DEV_2560&SUBSYS_00000000&REV_01\3&267A616A&0&00: Intel(R) 82845G/GL/GE/PE/GV/E Processor to I/O Controller - 2560
PCI\VEN_8086&DEV_2562&SUBSYS_4C598086&REV_01\3&267A616A&0&10: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
12 matching device(s) found.

2006-10-20 10:53:41 : <INIT> 3. HDAUDIO devices

No matching devices found.

2006-10-20 10:53:41 : <INIT> 4. USB devices

USB\ROOT_HUB\4&14585B78&0                                   : USB Root Hub
USB\ROOT_HUB\4&2A2676AC&0                                   : USB Root Hub
USB\ROOT_HUB\4&4C0FB18&0                                    : USB Root Hub
USB\ROOT_HUB20\4&11F46AA0&0                                 : USB Root Hub
4 matching device(s) found.

2006-10-20 10:53:42 : <INIT> Logging of HWIDs complete.
2006-10-20 10:53:42 : <CRIT> The DriverPacks root directory in the settings file doesn't contain a valid DriverPacks directory structure!
2006-10-20 10:53:47 : <CLNP> Deleted 'C:\DPsFnshr.ini'!
2006-10-20 10:53:47 : <CLNP> Deleted 'C:\devcon.exe'!
2006-10-20 10:53:47 : <CLNP> Deleted 'C:\makePNF.exe'!
2006-10-20 10:53:47 : <CLNP> Deleted 'C:\addUsepmtimer.exe'!
2006-10-20 10:53:47 : <CLNP> Deleted 'C:\ATICCP.ins'!
2006-10-20 10:53:47 : <CLNP> Added new value to the RunOnce key in the registry: the DriverPacks Finisher itself will get deleted after the next reboot.
2006-10-20 10:53:47 : Program terminated.

DPsFnshr.ini

[Settings]
; DO NOT SET THIS MANUALLY, LET THE DriverPacks BASE DO IT FOR YOU! (may NOT contain any spaced, if it does, all exceptions must be adapted to be compatible!)
DPsRoot	= "%SystemDrive%"
; DO NOT SET THIS MANUALLY, LET THE DriverPacks BASE DO IT FOR YOU!
KTD	= "paths:D\3"
; system variables supported: %SystemDrive%, %SystemRoot% and %WinDir%, one
; location cannot be used as KTDlocation: the root directory specified in
; [Settings]\DPsRoot
KTDlocation	= "%SystemRoot%\DriverPacks"


; =============================================================================
;
; REMARKS
;
; =============================================================================
; -----------------------------------------------------------------------------
; About adding your own exceptions
; -----------------------------------------------------------------------------
;
; - The following system variables are supported:
;  * %SystemDrive%
;  * %SystemRoot%
;  * %WinDir%
;  * %ProgramFiles%
;  * %DPSROOT% (equals the value of [Settings]\DPsRoot)
;  * %DPSTMP% (when you must extract files for example)
;
; - Available executables:
;  * addUsepmtimer.exe
;  * devcon.exe
;
; - The unique ID in the sectionnames (i.e.: [<OS platform>__<unique ID>__
;   <driver dir, including the master 'D' dir>]) must NOT be sequential, it
;   must just be unique. Only numbers (0-9) can be used. The reason for the
;   existence of this string is that sometimes there are multiple exceptions
;   for the same driver, which would result in identical section names, which
;   is not allowed.
;
; - A requirement of the type 'tagFiles' is considered forfilled if ALL of the
;   listed conditions are met.
;
; - A requirement of the types '+hwids', '-hwids', '+infFiles' and '-infFiles'
;   is considered forfilled if ANY of the listed conditions is met.
;
; - The commands will ONLY be executed if ALL the active requirements are
;
; - The commands will be executed in the order they are entered.
;
;
; -----------------------------------------------------------------------------
; About the implementation of KTD
; -----------------------------------------------------------------------------
;
; - To optimize the DevicePath entry in the registry (to allow more drivers to
;   be added), a new system variable will be created, which will accessible
;   through the variable %KTD%. The result is that each path that is added
;   (that refers to a driver), will be much shorter - and therefore this allows
;   more drivers to be added.
;
; =============================================================================


[wnt5_x86-32__0000__D-CP]
tagFiles	= 0
+hwids		= 1
+hwid1		= "ACPI\AUTHENTICAMD_-_X86_FAMILY_15_MODEL_"
-hwids		= 0
+infFiles	= 0
-infFiles	= 0
commands	= 1
command1	= "%SystemDrive%\addUsepmtimer.exe"


[wnt5_x86-32__0001__D-G-A-1]
tagFiles	= 2
tagFile1	= "%SystemDrive%\ATICCC.ins"
tagFile2	= "%DPSROOT%\D\G\A\1\ATICCC.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\1\*.inf"
-infFiles	= 0
commands	= 4
command1	= "%DPSROOT%\D\G\A\1\ATICCC.exe -y -o%DPSTMP%"
command2	= "msiexec /i %DPSTMP%\ISScript9.Msi /qn /norestart"
command3	= "msiexec /i %DPSTMP%\ATICCC.msi /qn /norestart"
command4	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0002__D-G-A-1]
tagFiles	= 2
tagFile1	= "%SystemDrive%\ATICCP.ins"
tagFile2	= "%DPSROOT%\D\G\A\1\ATICCP.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\1\*.inf"
-infFiles	= 0
commands	= 3
command1	= "%DPSROOT%\D\G\A\1\ATICCP.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\Setup.exe /K"
command3	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0021__D-G-A-2]
tagFiles	= 2
tagFile1	= "%SystemDrive%\ATICCC.ins"
tagFile2	= "%DPSROOT%\D\G\A\1\ATICCC.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\2\*.inf"
-infFiles	= 0
commands	= 4
command1	= "%DPSROOT%\D\G\A\1\ATICCC.exe -y -o%DPSTMP%"
command2	= "msiexec /i %DPSTMP%\ISScript9.Msi /qn /norestart"
command3	= "msiexec /i %DPSTMP%\ATICCC.msi /qn /norestart"
command4	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0022__D-G-A-2]
tagFiles	= 2
tagFile1	= "%SystemDrive%\ATICCP.ins"
tagFile2	= "%DPSROOT%\D\G\A\1\ATICCP.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\2\*.inf"
-infFiles	= 0
commands	= 3
command1	= "%DPSROOT%\D\G\A\1\ATICCP.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\Setup.exe /K"
command3	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0003__D-G-A-3]
tagFiles	= 1
tagFile1	= "%DPSROOT%\D\G\A\3\CPanel.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\A\3\*.inf"
-infFiles	= 0
commands	= 3
command1	= "%DPSROOT%\D\G\A\3\CPanel.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\setup.exe /K"
command3	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0004__D-G-3-1]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\3dfxV2ps.dll"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\3\1\*.inf"
-infFiles	= 0
commands	= 1
command1	= "%DPSROOT%\D\G\3\1\V2_OC_control_panel.exe"


[wnt5_x86-32__0005__D-G-S-1]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\sigrp.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\G\S\1\*.inf"
-infFiles	= 0
commands	= 3
command1	= "%DPSROOT%\D\G\S\1\UVGA3.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\setup.exe -s"
command3	= "rd /s /q %DPSTMP%"
de

[wnt5_x86-32__0006__D-L-NV-123]
tagFiles	= 0
+hwids		= 1
+hwid1		= "PCI\VEN_10DE&DEV_00DF&SUBSYS_E0001458&REV_A2"
-hwids		= 0
+infFiles	= 0
-infFiles	= 0
commands	= 2
command1	= "%SystemDrive%\devcon.exe updateni %DPSROOT%\D\L\NV\123\nvnetbus.inf "PCI\VEN_10DE&DEV_00DF&SUBSYS_E0001458&REV_A2""
command2 	= "%SystemDrive%\devcon.exe updateni %DPSROOT%\D\L\NV\123\nvnetfd.inf "{1a3e09be-1e45-494b-9174-d7385b45bbf5}\NVNET_DEV*""



[wnt5_x86-32__0007__D-S-CR-1]
tagFiles	= 2
tagFile1	= "%SystemRoot%\system32\drivers\ha20x2k.sys"
tagFile2	= "%DPSROOT%\D\S\CR\1\Ctzapxx.ini"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\CR\1\*.inf"
-infFiles	= 0
commands	= 19
command1	= "expand -r %DPSROOT%\D\S\CR\1\*.* %DPSROOT%\CR\1"
command2	= "expand -r %DPSROOT%\D\S\CR\1\common\*.* %DPSROOT%\D\S\CR\1\common"
command3	= "expand -r %DPSROOT%\D\S\CR\1\common\i386\*.* %DPSROOT%\D\S\CR\1\common\i386"
command4	= "expand -r %DPSROOT%\D\S\CR\1\lang\*.* %DPSROOT%\D\S\CR\1\lang"
command5	= "expand -r %DPSROOT%\D\S\CR\1\lang\i386\*.* %DPSROOT%\D\S\CR\1\lang\i386"
command6	= "expand -r %DPSROOT%\D\S\CR\1\win2k_xp\*.* %DPSROOT%\D\S\CR\1\win2k_xp"
command7	= "expand -r %DPSROOT%\D\S\CR\1\win2k_xp\data\*.* %DPSROOT%\D\S\CR\1\win2k_xp\data"
command8	= "expand -r %DPSROOT%\D\S\CR\1\win2k_xp\i386\*.* %DPSROOT%\D\S\CR\1\win2k_xp\i386"
command9	= "del /q %DPSROOT%\D\S\CR\1\*.??_"
command10	= "del /q %DPSROOT%\D\S\CR\1\common\*.??_"
command11	= "del /q %DPSROOT%\D\S\CR\1\common\i386\*.??_"
command12	= "del /q %DPSROOT%\D\S\CR\1\lang\*.??_"
command13	= "del /q %DPSROOT%\D\S\CR\1\lang\i386\*.??_"
command14	= "del /q %DPSROOT%\D\S\CR\1\win2k_xp\*.??_"
command15	= "del /q %DPSROOT%\D\S\CR\1\win2k_xp\data\*.??_"
command16	= "del /q %DPSROOT%\D\S\CR\1\win2k_xp\i386\*.??_"
command17	= "copy /y %DPSROOT%\D\S\CR\1\common\i386\CtCtlPan.cpl %SystemRoot%\system32\"
command18	= "copy /y %DPSROOT%\D\S\CR\1\common\i386\CtPanel.exe %SystemRoot%\system32\"
command19	= "start /wait %DPSROOT%\D\S\CR\1\CTZAPXX.exe /S"


[wnt5_x86-32__0008__D-S-CR-2]
tagFiles	= 3
tagFile1	= "%SystemRoot%\system32\drivers\ha10x2k.sys"
tagFile2	= "%SystemRoot%\system32\drivers\ha20x2k.sys"
tagFile3	= "%DPSROOT%\D\S\CR\2\Ctzapxx.ini"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\CR\2\*.inf"
-infFiles	= 0
commands	= 19
command1	= "expand -r %DPSROOT%\D\S\CR\2\*.* %DPSROOT%\CR\2"
command2	= "expand -r %DPSROOT%\D\S\CR\2\common\*.* %DPSROOT%\D\S\CR\2\common"
command3	= "expand -r %DPSROOT%\D\S\CR\2\common\i386\*.* %DPSROOT%\D\S\CR\2\common\i386"
command4	= "expand -r %DPSROOT%\D\S\CR\2\lang\*.* %DPSROOT%\D\S\CR\2\lang"
command5	= "expand -r %DPSROOT%\D\S\CR\2\lang\i386\*.* %DPSROOT%\D\S\CR\2\lang\i386"
command6	= "expand -r %DPSROOT%\D\S\CR\2\win2k_xp\*.* %DPSROOT%\D\S\CR\2\win2k_xp"
command7	= "expand -r %DPSROOT%\D\S\CR\2\win2k_xp\data\*.* %DPSROOT%\D\S\CR\2\win2k_xp\data"
command8	= "expand -r %DPSROOT%\D\S\CR\2\win2k_xp\i386\*.* %DPSROOT%\D\S\CR\2\win2k_xp\i386"
command9	= "del /q %DPSROOT%\D\S\CR\2\*.??_"
command10	= "del /q %DPSROOT%\D\S\CR\2\common\*.??_"
command11	= "del /q %DPSROOT%\D\S\CR\2\common\i386\*.??_"
command12	= "del /q %DPSROOT%\D\S\CR\2\lang\*.??_"
command13	= "del /q %DPSROOT%\D\S\CR\2\lang\i386\*.??_"
command14	= "del /q %DPSROOT%\D\S\CR\2\win2k_xp\*.??_"
command15	= "del /q %DPSROOT%\D\S\CR\2\win2k_xp\data\*.??_"
command16	= "del /q %DPSROOT%\D\S\CR\2\win2k_xp\i386\*.??_"
command17	= "copy /y %DPSROOT%\D\S\CR\2\common\i386\CtCtlPan.cpl %SystemRoot%\system32\"
command18	= "copy /y %DPSROOT%\D\S\CR\2\common\i386\CtPanel.exe %SystemRoot%\system32\"
command19	= "start /wait %DPSROOT%\D\S\CR\2\CTZAPXX.exe /S"


[wnt5_x86-32__0009__D-S-CR-3]
tagFiles	= 2
tagFile1	= "%SystemRoot%\system32\drivers\P17.sys"
tagFile2	= "%DPSROOT%\D\S\CR\3\Ctzapxx.ini"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\CR\3\*.inf"
-infFiles	= 0
commands	= 19
command1	= "expand -r %DPSROOT%\D\S\CR\3\*.* %DPSROOT%\CR\3"
command2	= "expand -r %DPSROOT%\D\S\CR\3\AddOn\*.* %DPSROOT%\D\S\CR\3\AddOn"
command3	= "expand -r %DPSROOT%\D\S\CR\3\common\*.* %DPSROOT%\D\S\CR\3\common"
command4	= "expand -r %DPSROOT%\D\S\CR\3\Lang\i386\*.* %DPSROOT%\D\S\CR\3\Lang\i386"
command6	= "expand -r %DPSROOT%\D\S\CR\3\Win2K_XP\*.* %DPSROOT%\D\S\CR\3\Win2K_XP"
command7	= "expand -r %DPSROOT%\D\S\CR\3\Win2K_XP\i386\*.* %DPSROOT%\D\S\CR\3\Win2K_XP\i386"
command8	= "del /q %DPSROOT%\D\S\CR\3\*.??_"
command9	= "del /q %DPSROOT%\D\S\CR\3\Addon\*.??_"
command10	= "del /q %DPSROOT%\D\S\CR\3\common\*.??_"
command11	= "del /q %DPSROOT%\D\S\CR\3\Lang\i386\*.??_"
command12	= "del /q %DPSROOT%\D\S\CR\3\Win2K_XP\*.??_"
command13	= "del /q %DPSROOT%\D\S\CR\3\Win2k_XP\i386\*.??_"
command14	= "start /wait %DPSROOT%\D\S\CR\3\CTZapxx.Exe /S"


[wnt5_x86-32__0010__D-S-H-2]
tagFiles	= 0
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\H\2.inf"
-infFiles	= 0
commands	= 4
command1	= "%SystemDrive%\devcon.exe disable =net"
command2	= "%SystemDrive%\devcon.exe updateni %DPSROOT%\D\S\H\2\wdmaherc.inf "PCI\VEN_1013&DEV_6003&SUBSYS_*""
command3	= "%SystemDrive%\devcon.exe updateni %DPSROOT%\D\S\H\2\wdmaherc.inf "HERCULES\*""
command4	= "%SystemDrive%\devcon.exe enable =net"


[wnt5_x86-32__0011__D-S-N]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\nvapu.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\N\*.inf"
-infFiles	= 0
commands	= 3
command1	= "start /wait %DPSROOT%\D\S\N\AudioUtl.exe -y -o%DPSTMP%"
command2	= "start /wait %DPSTMP%\Setup.exe -s -f1"
command3	= "rd /s /q %DPSTMP%"


[wnt5_x86-32__0012__D-S-S-U]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\sthda.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\S\U\3\*.inf"
-infFiles	= 0
commands	= 6
command3	= "copy /y %DPSROOT%\D\S\S\U\stlang.dll %SystemRoot%\system32"
command3	= "copy /y %DPSROOT%\D\S\S\U\stacgui.dll %SystemRoot%\system32"
command3	= "copy /y %DPSROOT%\D\S\S\U\stacgui.cpl %SystemRoot%\system32"
command3	= "md "%ProgramFiles%\Sigmatel\C-Major Audio\STACGUI""
command3	= "copy /y %DPSROOT%\D\S\S\U\sttray.exe "%ProgramFiles%\Sigmatel\C-Major Audio\STACGUI""
command3	= "copy /y %DPSROOT%\D\S\S\U\stlang.dll "%ProgramFiles%\Sigmatel\C-Major Audio\WDM""


[wnt5_x86-32__0013__D-S-SI-1]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\sis7012.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\SI\1\*.inf"
-infFiles	= 0
commands	= 1
command3	= "start /wait %DPSROOT%\D\S\SI\1\SI_7012.exe x -y o%SystemRoot%\"


[wnt5_x86-32__0014__D-S-SI-2]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\sis7018.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\SI\2\*.inf"
-infFiles	= 0
commands	= 1
command3	= "start /wait %DPSROOT%\D\S\SI\2\SI_7018.exe x -y o%SystemRoot%\"


[wnt5_x86-32__0015__D-S-T-2]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\FM801.sys"
tagFile1	= "%DPSROOT%\D\S\T\2\Setup.ex_"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\T\2\*.inf"
-infFiles	= 0
commands	= 3
command1	= "expand -r %DPSROOT%\D\S\T\2\*.* %DPSROOT%\D\S\T\2"
command2	= "del /q %DPSROOT%\D\S\T\2\*.??_"
command3	= "start /wait %DPSROOT%\D\S\T\2\Setup.exe /S"


[wnt5_x86-32__0016__D-S-T-3]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\cmaudio.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\T\3\*.inf"
-infFiles	= 0
commands	= 1
command3	= "start /wait %DPSROOT%\D\S\T\3\T_3.exe"

[wnt5_x86-32__0017__D-S-T-4]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\TT1724ht.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\T\4\*.inf"
-infFiles	= 0
commands	= 1
command3	= "start /wait %DPSROOT%\D\S\T\4\T_SSU.exe"


[wnt5_x86-32__0018__D-S-T-5]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\dmxsens.sys"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\T\5\*.inf"
-infFiles	= 0
commands	= 1
command3	= "start /wait %DPSROOT%\D\S\T\5\T_DMX.exe"


[wnt5_x86-32__0019__D-S-V-1]
tagFiles	= 1
tagFile1	= "%SystemRoot%\system32\drivers\envysens.sys"
tagFile1	= "%DPSROOT%\D\S\V\1\V_ENVY.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\V\1\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\V\1\V_ENVY.exe -y -o%SystemRoot%\"


[wnt5_x86-32__0020__D-S-V-2]
tagFiles	= 2
tagFile1	= "%SystemRoot%\system32\drivers\vinyl97.sys"
tagFile1	= "%DPSROOT%\D\S\V\2\V_VINYL.exe"
+hwids		= 0
-hwids		= 0
+infFiles	= 1
+infFile1	= "%DPSROOT%\D\S\V\2\*.inf"
-infFiles	= 0
commands	= 1
command1	= "start /wait %DPSROOT%\D\S\V\2\V_VINYL.exe -y -o%SystemRoot%\"
]]> Fri, 20 Oct 2006 07:59:23 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5423#p5423 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5420#p5420 Please post your DPsFnshr.log, Apollo.

]]> Fri, 20 Oct 2006 07:10:25 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5420#p5420 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5419#p5419 i have a similar problem. i'm using all official driverpacks and also a couple of custom-built ones. method 2 and runeonceex. the instalation works fine, the dirvers are unpacked to C:\D folder, but when the finisher program runs it sais the directory structure is wrong. i tried to use the KTD feature because i have a lot of printer drivers that i need on my system

]]> Fri, 20 Oct 2006 07:09:19 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5419#p5419 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5277#p5277 It's only used when you choose RunOnceEx as your Finisher method. It adds an entry to the registry to make sure the Finisher is executed by DPsFnshr.exe, the number behind it allows you to manipulate the order in which possible other RunOnceEx commands will be executed.

]]> Fri, 13 Oct 2006 21:59:02 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5277#p5277 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5270#p5270 Hello Bâshrat,

In and older version is see the ROE.exe in cmdlines.txt.
in the latest version I don't see it anymore. Neither is the ROE.exe in my setup folder.

What is the ROE.exe file doing ?

Thanks

]]> Fri, 13 Oct 2006 20:54:21 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5270#p5270 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5027#p5027 Where did the "ROE.exe" entry go?

]]> Sat, 07 Oct 2006 17:44:45 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5027#p5027 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5026#p5026 Hello Bâshrat,

This is my cmdlines.txt

[COMMANDS]
"Useraccounts.cmd"
"RunOnceEx.cmd"

thanks

]]> Sat, 07 Oct 2006 17:34:37 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5026#p5026 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=5025#p5025 Can you please post your cmdlines.txt?

]]> Sat, 07 Oct 2006 17:21:13 +0000 http://forum.driverpacks.net/viewtopic.php?pid=5025#p5025 <![CDATA[Re: [SOLVED] DriverPack Finisher error using ROE]]> http://forum.driverpacks.net/viewtopic.php?pid=4563#p4563 Hi there,

I have the same error like niche99, both in normal Cd as in Multiboot DVD.

I use GUIrunOnce  as finishing mode, and only use the MassStorageDrivers.
The DriverPacks root directory in the settings file doesn't contain a valid DriverPacks directory structure, is this a bad error ? I upgraded to
the new version yesterday.

Is it save tot remove the DPsFnshr.exe from the section.

[GuiRunOnce]
command9="%SystemDrive%\DPsFnshr.exe"

Hope that you can help me

]]> Tue, 26 Sep 2006 08:07:06 +0000 http://forum.driverpacks.net/viewtopic.php?pid=4563#p4563