Re: txtsetup.sif "cercsr6="Dell CERC SATA 1.5/6ch"D 26xx SAS (WXP)""

2010-11-25T01:18:23Z

you can't use mass 10.x.x with BASE 8.12.x or any other older versions of DriverPacks BASE.

Major changes with DriverPacks BASE and mass Storage took place in version 10.
You can't use 10x DriverPacks BASE with old mass.
You can't use 10x Mass Storage with old DriverPacks BASE.

It looks like there might be a stray " mark in the Mass INI file. We'll take a look.

Edit...

Hmmm... There is a huge hole in your txtsetup.sif file - all the entries after [D] and up to [H]... many lines are missing. Did you verify the MD5 of your Mass 10.10? Did you make changes after DriverPacks BASE was run? Did you have a bad burn on your disc?

txtsetup.sif "cercsr6="Dell CERC SATA 1.5/6ch"D 26xx SAS (WXP)""

2010-11-24T08:53:06Z

DPs_BASE_1006
DP_MassStorage_wnt5_x86-32_1010.7z

DPs_BASE.log
"
2010-11-24 16:34:19 : DriverPacks BASE 10.06 initialized.
2010-11-24 16:34:19 : Host environment: WIN_XP Service Pack 3 X86 on a X86 CPU.
2010-11-24 16:34:19 : Created temporary working directory.
2010-11-24 16:34:19 : Imported proxy settings from Internet Explorer.
2010-11-24 16:34:19 : Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-11-24 16:34:19 : Detected DriverPack LAN 10111!
2010-11-24 16:34:19 : Detected DriverPack Mass Storage 1010!
2010-11-24 16:34:19 : Detected DriverPack WLAN 1009!
2010-11-24 16:34:19 : Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-11-24 16:34:19 : Finished scanning.
2010-11-24 16:34:19 : Could not find settings file"C:\Documents and Settings\Administrator\??\DPs_BASE_1006\DPs_BASE.ini".
2010-11-24 16:34:19 : [General]\prefLang not specified: default (English) was set.
2010-11-24 16:34:19 : [General]\wizdButtons not specified: default (yes) was set.
2010-11-24 16:34:19 : [General]\GUI not specified: default (yes) was set.
2010-11-24 16:34:19 : [Settings]\DPsMethod not specified: default (2) was set.
2010-11-24 16:34:19 : [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2010-11-24 16:34:19 : [OptionalSettings]\KTD not specified: default (false) was set.
2010-11-24 16:34:19 : [OptionalSettings]\QSC not specified: default (yes) was set.
2010-11-24 16:34:19 : [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2010-11-24 16:34:19 : [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2010-11-24 16:34:19 : QuickStream Cache directory not found!
2010-11-24 16:34:19 : Initialized GUI.
2010-11-24 16:34:19 : Created a list of all available language files.
2010-11-24 16:34:19 : Set the last used language, English, as the GUI language.
2010-11-24 16:34:30 : Refreshed UpdateChecker with success.
2010-11-24 16:34:37 : Changed Windows installation files OR export (depending on the installation platform) location to C:\sata-winxp.
2010-11-24 16:34:37 : Windows XP Professional - Retail SP3 detected.
2010-11-24 16:34:37 : wnt5_x86-32_disc is the selected installation platform .
2010-11-24 16:34:37 : 3 Language file lng\Chinese (Taiwan).lng invalid: [wnt5_x86-32_disc__GUI]\settings_dps_04 entry does not exist! The English text will be shown instead! Please contact the translator for this language (Chinese (Taiwan)), Kene Lin, in the forum to fix this! have no notion of
2010-11-24 16:34:49 : Saved settings!
2010-11-24 16:34:49 : Closed GUI.
2010-11-24 16:34:49 : Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-11-24 16:35:05 : Removed all attributes from \I386.
2010-11-24 16:35:05 : No previous DriverPacks installation found, Prep stage will be skipped
2010-11-24 16:35:05 : Created QSC directory.
2010-11-24 16:35:17 : Extracted DriverPack MassStorage to a temporary working directory.
2010-11-24 16:35:17 : C:\Documents and Settings\Administrator\??\DPs_BASE_1006\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2010-11-24 16:35:19 : Processing Mass Storage files now. This may take a minute.
2010-11-24 16:36:09 : Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2010-11-24 16:36:11 : Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2010-11-24 16:36:11 : txtsetup.sif Backed-up Successfully
2010-11-24 16:36:11 : dosnet.inf Backed-up Successfully
2010-11-24 16:36:33 : Removed entries from \I386\txtsetup.sif that will be updated.
2010-11-24 16:36:39 : Removed entries from \I386\dosnet.inf that will be updated.
2010-11-24 16:39:17 : Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2010-11-24 16:39:17 : Created necessary directory structure for method 2.
2010-11-24 16:39:17 : Copying files necessary for method 2.
2010-11-24 16:39:17 : Extracted additional files necessary for method 2.
2010-11-24 16:39:18 : expanded setup.ex_ to setuporg.exe
2010-11-24 16:39:18 : SETUP.EX_ Backed-up Successfully
2010-11-24 16:39:18 : Compressed setup.exe to SETUP.EX_.
2010-11-24 16:39:18 : Method 2 setup.ex_ installed
2010-11-24 16:39:18 : Created \I386\presetup.cmd file.
2010-11-24 16:39:18 : Updated \I386\txtsetup.sif to support method 2.
2010-11-24 16:39:19 : Updated \I386\dosnet.inf to support method 2.
2010-11-24 16:39:19 : Copied DriverPack Mass Storage to \OEM.
2010-11-24 16:39:19 : Copied DriverPacks to \OEM.
2010-11-24 16:39:19 : Will not slipstream patches, Service Pack 3 was detected.
2010-11-24 16:39:19 : Will not slipstream KB888111 because no Sound DriverPack is being slipstreamed
2010-11-24 16:39:19 : Will not slipstream KB883667 because no Graphics DriverPack is being slipstreamed
2010-11-24 16:39:19 : WINNT.SIF Backed-up Successfully
2010-11-24 16:39:19 : Updated \I386\winnt.sif to support method 2.
2010-11-24 16:39:19 : Updated DPsFnshr.ini to disable KTD.
2010-11-24 16:39:20 : Updated \I386\winnt.sif's GUIRunOnce section.
2010-11-24 16:39:20 : DP_Install_Tool was copied successfully
2010-11-24 16:39:20 : Slipstream finished in 4 minutes and 31 seconds.
2010-11-24 16:40:23 : Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "Chinese (Taiwan)"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"

[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "C:\sata-winxp"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "GUIRunOnce"

; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "false"
; , to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "yes"

; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_LAN = "no"
DP_MassStorage = "yes"
DP_WLAN = "no"
DP_MassStorage_textmode = "yes"
2010-11-24 16:40:23 : Create a DPs_Base.log backup @ C:\Documents and Settings\Administrator\??\DPs_BASE_1006\LogFiles\DPs_BASE_10-11-24_16-40.log
2010-11-24 16:40:23 : Program terminated.
"

txtsetup.sif error
"
sym_u3 = "LSI Logic C1010 PCI SCSI Host Adapter"
symmpi ="LSI Logic SAS 3000/Dell SAS 5X/6I v11 (WXP)"
hpn = "Hewlett Packard NetRAID-4M RAID Controller"
3waregsm="3ware Escalade 6000 Storage 00 SATA RAID"
aec6210="ACARD AEA133 IDE/SATA"
aec68x5="ACARD AEC/6898 4-Channel IDE ULTRA 133/SATAtra/W SCSI"
aar81xx="Adaptec AARSA/AAR-1225SA SATA HOSTRAID"
aacsas="Adaptec/ICP/D"
m5281="ALi/ULi M5281/M5283 SATA/RAID"
m5287="P ProLiant SCSI"
cercsr6="Dell CERC SATA 1.5/6ch"D 26xx SAS (WXP)"
hptmv6="Highpoint RocketRAID 22x DAC960PG/PJ/PR/PT/PTL1/PRL Series Disk Array Coxxmm="Marvell 64xx/63xx SAS Shared Librar 91xx Side376xp="Promise SATA378 IDE (WXP)"
fasttrak="II 150 SX8"
fastsx="Promise FastTrak S150 SX4/SX4000"
sptrak="Promise SuperTrak SX6000 IDE RAID"
ulsata="Promise SATA150 TX Series IDE (XP)"
ulsata2="Promise SATAII150/SATA300 TX"
ultra="Promise Ultra133 TX2, Ultra100 TX2, Ultra66, Ultra33 IDE"
fttxr52P="Promise TX2200 FastTrak 519/579/719/779 SoftRaid5"
prfsx4xp="Promise FastTrak S150 SX4 Lite/620 (WXP)"
FTTXR5_O="Promise FastTrak TX4310"
"
DPs_BASE_8124
DP_MassStorage_wnt5_x86-32_1010.7z
txtsetup.sif error
"
PCI\VEN_10B9&DEV_5288&SUBSYS_528810B9="m5288"
PCI\VEN_10B9&DEV_5289="m5289"
PCI\VEN_10B9&DEV_5289&SUBSYS_528910B9="m5289"
PCI\VEN_1000&DEV_0001="symc8xx"
PCI\VEN_1000&DEV_0003="symc8xx"
PCI\VEN_1000&DEV_000a="symc8xx"
PCI\VEN_1000&DEV_000b="symc8xx"
PCI\VEN_1000&DEV_000c="symc8xx"
PCI\VEN_1000&DEV_000f="symc8xx"
PCI\VEN_1000&DEV_0012="symc8xx"
="sym_hi")"
PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11="cpqcissm"
PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11="cpqcissm"
PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11="cpqcissm"
PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11="cpqcissm"
PCI\VEN_0E11&DEV_0046&SUBSYS_40910E11="cpqcissm"
PCI\VEN_0E11&DEV_0046&SUBSYS_409A0E11="cpqcissm"
PCI\VEN_0E11&DEV_0046&SUBSYS_409B0E11="cpqcissm"
PCI\VEN_0E11&DEV_0046&SUBSYS_409C0E11="cpqcissm"
PCI\VEN_0E11&DEV_0046&SUBSYS_409D0E11="cpqcissm"
PCI\VEN_1000&DEV_0010&SUBSYS_40400E11="cpqarry2"
"
DPs_BASE.log
“
2010-11-24 16:57:40 : DriverPacks BASE 8.12.4 initialized.
2010-11-24 16:57:40 : Host environment: WIN_XP Service Pack 3 on X86 CPU.
2010-11-24 16:57:40 : Created temporary working directory.
2010-11-24 16:57:40 : Imported proxy settings from Internet Explorer.
2010-11-24 16:57:40 : Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-11-24 16:57:40 : Detected DriverPack MassStorage 1010!
2010-11-24 16:57:40 : Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-11-24 16:57:40 : Finished scanning.
2010-11-24 16:57:40 : Could not find settings file"D:\My Documents\My ISO Files\????\software\CD\DPs_BASE_8124\DPs_BASE.ini".
2010-11-24 16:57:40 : [General]\prefLang not specified: default (English) was set.
2010-11-24 16:57:40 : [General]\wizdButtons not specified: default (yes) was set.
2010-11-24 16:57:40 : [General]\GUI not specified: default (yes) was set.
2010-11-24 16:57:40 : [Settings]\DPsMethod not specified: default (2) was set.
2010-11-24 16:57:40 : [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2010-11-24 16:57:40 : [OptionalSettings]\KTD not specified: default (none) was set.
2010-11-24 16:57:40 : [OptionalSettings]\QSC not specified: default (yes) was set.
2010-11-24 16:57:40 : [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2010-11-24 16:57:40 : [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2010-11-24 16:57:40 : QuickStream Cache directory not found!
2010-11-24 16:57:40 : Initialized GUI.
2010-11-24 16:57:40 : Created a list of all available language files.
2010-11-24 16:57:40 : Set the last used language, English, as the GUI language.
2010-11-24 16:57:50 : Changed Windows installation files OR export (depending on the installation platform) location to C:\sata-winxp.
2010-11-24 16:57:51 : Windows XP Professional - Retail SP3 detected.
2010-11-24 16:57:51 : wnt5_x86-32_disc is the selected installation platform .
2010-11-24 16:58:08 : Refreshed UpdateChecker with success.
2010-11-24 16:58:14 : Saved settings!
2010-11-24 16:58:14 : Closed GUI.
2010-11-24 16:58:14 : Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-11-24 16:58:30 : Removed all attributes from \I386.
2010-11-24 16:58:30 : No previous DriverPacks installation found, Prep stage will be skipped
2010-11-24 16:58:30 : Created QSC directory.
2010-11-24 16:58:44 : Extracted DriverPack MassStorage to a temporary working directory.
2010-11-24 16:58:44 : D:\My Documents\My ISO Files\????\software\CD\DPs_BASE_8124\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2010-11-24 16:58:46 : Processing the files now. This may take a minute.
2010-11-24 16:59:38 : Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2010-11-24 16:59:40 : Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2010-11-24 16:59:40 : txtsetup.sif Backed-up Successfully
2010-11-24 16:59:40 : dosnet.inf Backed-up Successfully
2010-11-24 16:59:59 : Removed entries from \I386\txtsetup.sif that will be updated.
2010-11-24 17:00:01 : Removed entries from \I386\dosnet.inf that will be updated.
2010-11-24 17:02:46 : Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2010-11-24 17:02:46 : Created necessary directory structure for method 2.
2010-11-24 17:02:46 : Copying files necessary for method 2.
2010-11-24 17:02:46 : Extracted additional files necessary for method 2.
2010-11-24 17:02:48 : expanded setup.ex_ to setuporg.exe
2010-11-24 17:02:48 : SETUP.EX_ Backed-up Successfully
2010-11-24 17:02:48 : Compressed setup.exe to SETUP.EX_.
2010-11-24 17:02:48 : Method 2 setup.ex_ installed
2010-11-24 17:02:48 : Created \I386\presetup.cmd file.
2010-11-24 17:02:48 : Updated \I386\txtsetup.sif to support method 2.
2010-11-24 17:02:49 : Updated \I386\dosnet.inf to support method 2.
2010-11-24 17:02:49 : Copied DriverPack MassStorage to \OEM.
2010-11-24 17:02:49 : Copied DriverPacks to \OEM.
2010-11-24 17:02:49 : Will not slipstream patches, Service Pack 3 was detected.
2010-11-24 17:02:49 : Will not slipstream KB888111 because no Sound DriverPack is being slipstreamed
2010-11-24 17:02:49 : Will not slipstream KB883667 because no Graphics DriverPack is being slipstreamed
2010-11-24 17:02:49 : WINNT.SIF Backed-up Successfully
2010-11-24 17:02:50 : Updated \I386\winnt.sif to support method 2.
2010-11-24 17:02:50 : Updated DPsFnshr.ini to disable KTD.
2010-11-24 17:02:50 : Updated \I386\winnt.sif's GUIRunOnce section.
2010-11-24 17:02:52 : DP_Install_Tool was copied successfully
2010-11-24 17:02:52 : Slipstream finished in 4 minutes and 39 seconds.
2010-11-24 17:02:57 : Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang = "Chinese (Simplified)"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"

; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_MassStorage = "yes"
DP_MassStorage_textmode = "yes"
2010-11-24 17:02:57 : Create a DPs_Base.log backup @ D:\My Documents\My ISO Files\????\software\CD\DPs_BASE_8124\LogFiles\DPs_BASE_10-11-24_17-02.log
2010-11-24 17:02:57 : Program terminated.
”

DriverPacks.net Forum - txtsetup.sif "cercsr6="Dell CERC SATA 1.5/6ch"D 26xx SAS (WXP)""

Re: txtsetup.sif "cercsr6="Dell CERC SATA 1.5/6ch"D 26xx SAS (WXP)""

txtsetup.sif "cercsr6="Dell CERC SATA 1.5/6ch"D 26xx SAS (WXP)""