DriverPacks.net Forum - BSOD in VirtualBox due to mass storage pack 10.06

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-07-01T11:10:41Z

Well, I've tried a plethora of things, but no success...
Old thread solution: no changes (predictable);
Various nlited xp installation: no changes;
XP installation sp3: no changes;
XP installation sp2: no changes.
I'm using the lastest virtualbox from oracle, controller sata for the disk, controller ide for the installation cd and I can't say nothing else except 'back to the mass-storage 9.01" and hope the best for the 10.06.1

This is the BSoD code: "STOP: 0x000000F4 (0x00000003, 0x81592CA8, 0x81592E1C, 0x805FB02E)"
If I reboot the virtualbox systema and I restart the installation process, comes out a simple blue screen: "STOP: c000021a Unknown Hard Error"

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-30T05:32:01Z

ricktendo64 wrote:

Edit: actually I just found Intel RST updated to v9.6.4.1001 on Station-Drivers

No official Intel download yet, but the station-drivers v9.6.4.1002 link is here: http://www.station-drivers.com/page/intel%20raid.htm
We'll have to keep an eye out for an official link.

IIRC, the older version is kept around because not all chips support the new technology (ICH5 & 6).

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-29T19:22:14Z

Why are you guys still using Matrix Storage Manager v5.5.0.1035 when v8.9.6.1002 is available & Intel have even changed the name and gone with Rapid Storage Technology with v9.6.3.1001 being the most recent?

Edit: actually I just found Intel RST updated to v9.6.4.1001 on Station-Drivers

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-28T18:20:51Z

I just want to point out that I haven't had this problem in a long time.
But my HWID is PCI\VEN_8086&DEV_2922&SUBSYS_B0051458&REV_02
Which is an ICH9R SATA controller. Very different from the one in the first post.

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-28T16:05:42Z

Found this old thread (2007): Virtual Box SATA controllerz
I hope this can help... I will try tomorrow if the old solution matches with my problem...

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-24T13:14:31Z

As I am testing my xp release with virtualbox, this is the HWIDs made inside virtualbox. I obviously did this on the system installed using the older 9.01 mass-storage pack, that works without any problem.

My virtualbox configuration is: one Sata controller with the hard disk and one Ide controller for the cd-dvd drive.

=========== 
PCI Devices 
=========== 
PCI\VEN_1022&DEV_2000&SUBSYS_20001022&REV_40\3&267A616A&0&18: Scheda Ethernet PCI AMD PCNET Family
PCI\VEN_106B&DEV_003F&SUBSYS_00000000&REV_00\3&267A616A&0&30: Controller host USB OpenHCD Standard
PCI\VEN_8086&DEV_1237&SUBSYS_00000000&REV_02\3&267A616A&0&00: Adattatore Intel 82441FX da processore Pentium(R) Pro a PCI
PCI\VEN_8086&DEV_2415&SUBSYS_00008086&REV_01\3&267A616A&0&28: Controller audio Intel(r) 82801AA AC'97
PCI\VEN_8086&DEV_265C&SUBSYS_00000000&REV_00\3&267A616A&0&58: Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
PCI\VEN_8086&DEV_2829&SUBSYS_00000000&REV_02\3&267A616A&0&68: Intel(R) ICH8M SATA AHCI Controller - 2829
PCI\VEN_8086&DEV_7000&SUBSYS_00000000&REV_00\3&267A616A&0&08: Adattatore Intel 82371SB da PCI a ISA
PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\3&267A616A&0&09: Controller IDE Intel(R) 82371AB/EB PCI Bus Master
PCI\VEN_80EE&DEV_BEEF&SUBSYS_00000000&REV_00\3&267A616A&0&10: VirtualBox Graphics Adapter
PCI\VEN_80EE&DEV_CAFE&SUBSYS_00000000&REV_00\3&267A616A&0&20: VirtualBox Device
10 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&24D6EB65&0                                   : Hub principale USB
USB\ROOT_HUB20\4&6A987E4&0                                  : Hub principale USB
2 matching device(s) found.
 
============= 
Input Devices 
============= 
No matching devices found.
 
============ 
ACPI Devices 
============ 
ACPI\ACPI0003\0                                             : Scheda AC Microsoft
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : Pulsante caratteristica ACPI fissa
ACPI\PNP0000\4&1D401FB5&0                                   : Controller di interrupt programmabile (PIC)
ACPI\PNP0100\4&1D401FB5&0                                   : Timer di sistema
ACPI\PNP0200\4&1D401FB5&0                                   : Controller di accesso diretto alla memoria (DMA)
ACPI\PNP0303\4&1D401FB5&0                                   : Tastiera standard 101/102 tasti o Tastiera Microsoft Natural PS/2
ACPI\PNP0400\4&1D401FB5&0                                   : Porta stampante (LPT1)
ACPI\PNP0A03\0                                              : Bus PCI
ACPI\PNP0F03\4&1D401FB5&0                                   : Mouse Microsoft PS/2
ACPI_HAL\PNP0C08\0                                          : Sistema compatibile ACPI Microsoft
ROOT\ACPI_HAL\0000                                          : PC ad interfaccia di alimentazione e configurazione avanzata (ACPI)
11 matching device(s) found.
 
============ 
 HDA Audio 
============ 
No matching devices found.
 
============ 
RAID Devices 
============ 
PCI\VEN_8086&DEV_2829&SUBSYS_00000000&REV_02\3&267A616A&0&68
    Name: Intel(R) ICH8M SATA AHCI Controller - 2829
    Hardware ID's:
        PCI\VEN_8086&DEV_2829&SUBSYS_00000000&REV_02
        PCI\VEN_8086&DEV_2829&SUBSYS_00000000
        PCI\VEN_8086&DEV_2829&REV_02
        PCI\VEN_8086&DEV_2829
        PCI\VEN_8086&DEV_2829&CC_010601
        PCI\VEN_8086&DEV_2829&CC_0106
    Compatible ID's:
        PCI\VEN_8086&CC_010601
        PCI\VEN_8086&CC_0106
        PCI\VEN_8086
        PCI\CC_010601
        PCI\CC_0106
PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01\3&267A616A&0&09
    Name: Controller IDE Intel(R) 82371AB/EB PCI Bus Master
    Hardware ID's:
        PCI\VEN_8086&DEV_7111&SUBSYS_00000000&REV_01
        PCI\VEN_8086&DEV_7111&SUBSYS_00000000
        PCI\VEN_8086&DEV_7111&REV_01
        PCI\VEN_8086&DEV_7111
        PCI\VEN_8086&DEV_7111&CC_01018A
        PCI\VEN_8086&DEV_7111&CC_0101
    Compatible ID's:
        PCI\VEN_8086&CC_01018A
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018A
        PCI\CC_0101
2 matching device(s) found.

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-23T23:46:49Z

thanks for the follow up...

Can we please have the HWIDs too?

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-23T12:28:25Z

Well, I apologize, but I read just the smart way and didn't found/read these indications...
Anyway, I think it's a similar problem to this thread: Blue Screen with MassStorage v10.06 on Intel ICH8M Chip, so I will wait for the 10.06.1 you're working on.
Thank you for all the great job you're doing!

DPs_BASE.ini

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "N:\Unattending\OS\HRnew\F07b_drp1006"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; , to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_MassStorage	= "yes"
DP_MassStorage_textmode = "yes"

The log file:

2010-06-23 14:23:39 :  DriverPacks BASE 10.06 initialized.
2010-06-23 14:23:39 :  Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2010-06-23 14:23:39 :  Created temporary working directory.
2010-06-23 14:23:39 :  Imported proxy settings from Internet Explorer.
2010-06-23 14:23:39 :  Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-06-23 14:23:39 :  	Detected DriverPack Chipset 10051!
2010-06-23 14:23:39 :  	Detected DriverPack Chipset 10052!
2010-06-23 14:23:39 :  	Detected DriverPack CPU 1005!
2010-06-23 14:23:39 :  	Detected DriverPack CPU 912!
2010-06-23 14:23:39 :  	Detected DriverPack Mass Storage 1006!
2010-06-23 14:23:39 :  	Detected DriverPack Mass Storage 901!
2010-06-23 14:23:39 :  	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-06-23 14:23:39 :  	Finished scanning.
2010-06-23 14:23:39 :  Detected settings file "N:\Unattending\Strum\DriverPacker\DPs_BASE.ini".
2010-06-23 14:23:39 :  Windows XP Professional -  OEM SP3 detected.
2010-06-23 14:23:39 :  wnt5_x86-32_disc is the selected installation platform .
2010-06-23 14:23:39 :  Imported settings from settings file.
2010-06-23 14:23:39 :  [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2010-06-23 14:23:39 :  [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2010-06-23 14:23:39 :   Initialized GUI.
2010-06-23 14:23:39 :   Created a list of all available language files.
2010-06-23 14:23:39 :   Set the last used language, English, as the GUI language.
2010-06-23 14:23:48 :   Changed Windows installation files OR export (depending on the installation platform) location to N:\Unattending\OS\HRnew\F07.
2010-06-23 14:23:48 :   Windows XP Professional -  OEM SP3 detected.
2010-06-23 14:23:48 :   wnt5_x86-32_disc is the selected installation platform .
2010-06-23 14:23:52 :   Refreshed UpdateChecker with success.
2010-06-23 14:24:17 :   Saved settings!
2010-06-23 14:24:17 :   Closed GUI.
2010-06-23 14:24:17 :   Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-06-23 14:24:18 :  Removed all attributes from \I386.
2010-06-23 14:24:18 :  No previous DriverPacks installation found, Prep stage will be skipped
2010-06-23 14:24:24 :  Extracted DriverPack MassStorage to a temporary working directory.
2010-06-23 14:24:24 :  N:\Unattending\Strum\DriverPacker\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2010-06-23 14:24:25 :  Processing Mass Storage files now. This may take a minute.
2010-06-23 14:24:43 :  Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2010-06-23 14:24:44 :  Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2010-06-23 14:24:44 :  txtsetup.sif Backed-up Successfully
2010-06-23 14:24:44 :  dosnet.inf Backed-up Successfully
2010-06-23 14:24:48 :  Removed entries from \I386\txtsetup.sif that will be updated.
2010-06-23 14:24:50 :  Removed entries from \I386\dosnet.inf that will be updated.
2010-06-23 14:25:18 :  Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2010-06-23 14:25:18 :  Created necessary directory structure for method 2.
2010-06-23 14:25:18 :  Copying files necessary for method 2.
2010-06-23 14:25:18 :  Extracted additional files necessary for method 2.
2010-06-23 14:25:18 :  expanded setup.ex_ to setuporg.exe
2010-06-23 14:25:18 :  SETUP.EX_ Backed-up Successfully
2010-06-23 14:25:18 :  Compressed setup.exe to SETUP.EX_.
2010-06-23 14:25:18 :  Method 2 setup.ex_ installed
2010-06-23 14:25:18 :  Created \I386\presetup.cmd file.
2010-06-23 14:25:18 :  Updated \I386\txtsetup.sif to support method 2.
2010-06-23 14:25:18 :  Updated \I386\dosnet.inf to support method 2.
2010-06-23 14:25:18 :  Copied DriverPack Mass Storage to \OEM.
2010-06-23 14:25:18 :  Copied DriverPacks to \OEM.
2010-06-23 14:25:18 :  Will not slipstream patches, Service Pack 3 was detected.
2010-06-23 14:25:18 :  Will not slipstream KB888111 because no Sound DriverPack is being slipstreamed
2010-06-23 14:25:18 :  Will not slipstream KB883667 because no Graphics DriverPack is being slipstreamed
2010-06-23 14:25:18 :  WINNT.SIF Backed-up Successfully
2010-06-23 14:25:19 :  Updated \I386\winnt.sif to support method 2.
2010-06-23 14:25:19 :  Updated DPsFnshr.ini to disable KTD.
2010-06-23 14:25:19 :  Updated \I386\winnt.sif's GUIRunOnce section.
2010-06-23 14:25:19 :  DP_Install_Tool was copied successfully
2010-06-23 14:25:19 :  Slipstream finished in 1 minutes and 2 seconds.
2010-06-23 14:25:39 :  Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "N:\Unattending\OS\HRnew\F07"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; , to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "no"
DP_CPU		= "no"
DP_MassStorage	= "yes"
DP_MassStorage_textmode = "yes"
2010-06-23 14:25:39 :  Create a DPs_Base.log backup @ N:\Unattending\Strum\DriverPacker\LogFiles\DPs_BASE_10-06-23_14-25.log
2010-06-23 14:25:39 :  Program terminated.

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-22T17:57:24Z

Read BEFORE you post... linked in my signature. (AKA Rule #0)

There is a list of what we need to support you. Check the items off the list.

Re: BSOD in VirtualBox due to mass storage pack 10.06

2010-06-22T17:31:37Z

no, you should read the faq/rules, gather the required information, and post that..........

BSOD in VirtualBox due to mass storage pack 10.06

2010-06-22T07:31:59Z

The new mass storage pack (10.06 with the text-mode) makes my xp x86 installation process crash with a blue-screen-of-death.
The weird aspect is that the process doesn't crash when searching for the drivers (I mean, just before choosing the installation partition). It crashes after the first reboot - just after searching for peripheral devices - before the T13 silent installations sequence.
The same problem does not occur with the mass storage pack 9.01.
I'm testing all this on a VirtualBox system and the problem comes out just on a SATA configuration. It never occurs if I try to install on a IDE configuration.

DriverPacks BASE 10.06
DP_MassStorage_wnt5_x86-32_1006.7z
DriverPacks Method 2
DriverPacks Finisher Method: GUI Run Once
Installation Platform: "a disc"
Destination OS Platform: wnt5_86-32.
I've checked the MD5 checksum, downloaded two times the pack and all was successfully.

Should I post the bsod?