<![CDATA[DriverPacks.net Forum - [IMPL] ELAN PS/2 Port Smart-Pad]]> 2010-07-10T21:03:47Z PunBB http://forum.driverpacks.net/viewtopic.php?id=4633 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> OverFlow wrote:

did you manage to add the driver to BartPE manually? (as I described)
- That is to say there were no warnings or errors reported by PEBuilder?

Yes I did this but with the same results with no errors/warnings on start up.  When I try to automatically find the driver after the UI comes up, it's found but the with the same issue as I posted in the image.  Both the ELAN Smart-Pad and Input Device are listed along with the Microsoft Mouse and the standard drivers, so I know they're there and found.

OverFlow wrote:

It is important to note here that BartPE is not a windows replacement.
Some things are Extremely difficult to make work in a Pre-installation Environment (PE).
Many times they are simply not worth the effort... anything is possable... How much time do you have to devote to it?

Think of it as trying to run windows XP programs in windows 98. Some may work no problem others may not work at all.

Yes I totally agree with you.  I was actually going to just drop it, but didn't want to leave mr_smartepants without a follow up to his inquiry. smile

OverFlow wrote:

We are being patient... you weren't banned were you? big_smile tongue wink
Why (in the world would you do this)? is a totally valid question... no offense intended

Yeah, I would probably ban myself at this point. tongue  No offense taken, but I've already answered this question, i.e., I just used this as a sandbox to learn about BartPE, how to configure it, how to use the driver packs.  I'm new to all this.  Right now I'm trying to figure out how to create a plug-in for BartPE.  I mainly use BartPE to back up and restore computers, wipe hard drives and that type of needs.  I'm NOT using it as an OS, but it's nice to have it come up, for convenience, configured with as many drivers as possible already in place for the hardware available.

]]> http://forum.driverpacks.net/profile.php?id=12124 2010-07-10T21:03:47Z http://forum.driverpacks.net/viewtopic.php?pid=39324#p39324 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> did you manage to add the driver to BartPE manually? (as I described)
- That is to say there were no warnings or errors reported by PEBuilder?

It is important to note here that BartPE is not a windows replacement.
Some things are Extremely difficult to make work in a Pre-installation Environment (PE).
Many times they are simply not worth the effort... anything is possable... How much time do you have to devote to it?

Think of it as trying to run windows XP programs in windows 98. Some may work no problem others may not work at all.

We are being patient... you weren't banned were you? big_smile tongue wink
Why (in the world would you do this)? is a totally valid question... no offense intended

]]> http://forum.driverpacks.net/profile.php?id=1097 2010-07-10T17:14:02Z http://forum.driverpacks.net/viewtopic.php?pid=39319#p39319 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> Okay, I just got around to trying this and it didn't work.  But, it may be that it's not compatible in a BartPE environment?
http://img824.imageshack.us/img824/812/elannotinstalledinbartp.jpg
But like I said, it's no big deal as I was using it as part of learning about all this BartPE stuff.  I did have to manually install the driver from Device Manager from my OEM folder that I created using the Disc option from the BASE application.

]]> http://forum.driverpacks.net/profile.php?id=12124 2010-07-10T15:42:38Z http://forum.driverpacks.net/viewtopic.php?pid=39316#p39316 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> That's alright.  I uploaded the HID Third Party DriverPack version 1007.

]]> http://forum.driverpacks.net/profile.php?id=1602 2010-07-05T04:59:29Z http://forum.driverpacks.net/viewtopic.php?pid=39237#p39237 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> Sorry for the delay.  Been very busy and am traveling right now.  I should have time next week to get back to this.  Will let you know either way.

]]> http://forum.driverpacks.net/profile.php?id=12124 2010-07-05T01:36:24Z http://forum.driverpacks.net/viewtopic.php?pid=39234#p39234 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> Any word on whether they worked or not?

]]> http://forum.driverpacks.net/profile.php?id=1602 2010-06-29T20:32:42Z http://forum.driverpacks.net/viewtopic.php?pid=39176#p39176 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> OverFlow wrote:

...IF it is working why bother???

If it is not working... Who cares? Your a Tech ain'tcha?... Hang a freaking mouse on it and call it a day.

I'm using this as training aid for myself to learn how to do all this stuff including 3rd Party stuff.  I'd appreciate a little patience.  It's not about whether it works or not right now.

I've gone through a lot of resource documents but many are old and I've missed a few things sifting through the massive amount of info trying to find out what info is relevant and what's not.  So please just be patient.

@mr_smartepants,
Thank you.  I didn't think the driver was in the HID pack, but I did test it prior to you adding it and it didn't recognize it for what it is, so I'll test the updated pack tonight.  Thanks again.

]]> http://forum.driverpacks.net/profile.php?id=12124 2010-06-17T15:35:14Z http://forum.driverpacks.net/viewtopic.php?pid=38924#p38924 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> LOL, I don't think there are any Elan drivers in the HID Third Party DriverPack at all. Sorry.
I'll add them in so you can test OK?
OK, I added them and uploaded HID Third Party DriverPack 10.06.  Can you please test.

]]> http://forum.driverpacks.net/profile.php?id=1602 2010-06-17T05:27:37Z http://forum.driverpacks.net/viewtopic.php?pid=38914#p38914 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> you can't add drivers to BartPE by slipstreaming them into your source. That won't work, and will in fact corrupt your source. (at least for use with BartPE)

I think mr_smarteapnts wanted you to do an install and see if the driver was picked up...

ONLY USE a CLEAN XP SP2 source for BartPE... (or clean 2k3)

You won't want to or need to create a driverpack for BartPE

You will need to either
1) add it to the  "\drivers" folder of your BartPE or
2) create a "plugin" in the plugin folder of your BartPE

The simpler of the two solutions is to add your driver to the Your_path_here\pebuilder\drivers\your_driver_folder_here

Simply copy the INF and SYS files to that folder along with any other supporting files that exist with your driver.

- IE Put any files referenced in your drivers INF in the "your_driver_folder_here" folder, and build your source as normal.

IDK Why you would need this in BartPE... I can backup image and remove a virus just fine without a mouse... (and if you can't you should not be fixing PCs for a living) SOOO who cares if the mouse has the wrong name??? So it says its a PS2 mouse instead of a touch pad...

IF it is working why bother???

If it is not working... Who cares? Your a Tech ain'tcha?... Hang a freaking mouse on it and call it a day.

]]> http://forum.driverpacks.net/profile.php?id=1097 2010-06-17T03:52:21Z http://forum.driverpacks.net/viewtopic.php?pid=38910#p38910 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> Okay, I tried going the Disc method and then slipstreamed it into my I386 and then created my BartPE for UBCD4Win.  No joy on the touchpad driver.  I was hoping it would have been available.  I'll have to learn how to create my own driver pack for this one.  I'm posting my updated info just in case I messed something up.

INI settings:

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "D:\XP 32bit"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl		= "CCC"
Nvidia_cpl	= "None"

and build LOG:

2010-06-16 12:19:43 : <INIT> DriverPacks BASE 10.06 initialized.
2010-06-16 12:19:43 : <INIT> Host environment: WIN_7  X64 on a X64 CPU.
2010-06-16 12:19:43 : <INIT> Created temporary working directory.
2010-06-16 12:19:43 : <INIT> Imported proxy settings from Internet Explorer.
2010-06-16 12:19:43 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack Chipset 10052!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack CPU 1005!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack Graphics A 1005!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack Graphics B 1005!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack Graphics C 1005!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack LAN 10051!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack Mass Storage 1006!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack Sound A 1006!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack Sound B 1006!
2010-06-16 12:19:43 : <INIT> 	Detected DriverPack WLAN 10051!
2010-06-16 12:19:43 : <INIT> 	Detected 3rd Party DriverPack Bluetooth 1005b1!
2010-06-16 12:19:43 : <INIT> 	Detected 3rd Party DriverPack HID 1005!
2010-06-16 12:19:43 : <INIT> 	Detected 3rd Party DriverPack PrintersHP 71126!
2010-06-16 12:19:43 : <INIT> 	Detected 3rd Party DriverPack Runtimes 1005!
2010-06-16 12:19:43 : <INIT> 	Detected 3rd Party DriverPack WebCam 10051!
2010-06-16 12:19:43 : <INIT> 	Finished scanning.
2010-06-16 12:19:43 : <INIT> Detected settings file "E:\Drivers and Utilities\BOOT Disks\Ultimate Boot CD for Windows\Driver Packs\WinXP x86\BASE 10.06\BASE Application\DPs_BASE.ini".
2010-06-16 12:19:43 : <INIT> Windows XP Professional -  Retail SP3 detected.
2010-06-16 12:19:43 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2010-06-16 12:19:43 : <INIT> Imported settings from settings file.
2010-06-16 12:19:43 : <GUI>  Initialized GUI.
2010-06-16 12:19:43 : <GUI>  Created a list of all available language files.
2010-06-16 12:19:44 : <GUI>  Set the last used language, English, as the GUI language.
2010-06-16 12:19:50 : <GUI>  Windows XP Professional -  Retail SP3 detected.
2010-06-16 12:19:50 : <GUI>  wnt5_x86-32_disc is the selected installation platform .
2010-06-16 12:19:55 : <GUI>  Refreshed UpdateChecker with success.
2010-06-16 12:20:13 : <GUI>  Changed Windows installation files OR export (depending on the installation platform) location to D:\XP 32bit.
2010-06-16 12:20:13 : <GUI>  Windows XP Professional -  Retail SP3 detected.
2010-06-16 12:20:13 : <GUI>  wnt5_x86-32_disc is the selected installation platform .
2010-06-16 12:20:35 : <GUI>  Exported settings to E:\Drivers and Utilities\BOOT Disks\Ultimate Boot CD for Windows\Driver Packs\WinXP x86\BASE 10.06\BASE Application\DiscCustomSettings.ini.
2010-06-16 12:20:38 : <GUI>  Saved settings!
2010-06-16 12:20:38 : <GUI>  Closed GUI.
2010-06-16 12:20:38 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-06-16 12:20:39 : <PREP> Removed all attributes from \I386.
2010-06-16 12:20:39 : <PREP> No previous DriverPacks installation found, Prep stage will be skipped
2010-06-16 12:20:49 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2010-06-16 12:20:49 : <SLIP> E:\Drivers and Utilities\BOOT Disks\Ultimate Boot CD for Windows\Driver Packs\WinXP x86\BASE 10.06\BASE Application\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2010-06-16 12:20:50 : <SLIP> Processing Mass Storage files now. This may take a minute.
2010-06-16 12:21:17 : <SLIP> Created QuickStream Cache for DriverPack MassStorage text mode drivers.
2010-06-16 12:21:18 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2010-06-16 12:21:19 : <SLIP> txtsetup.sif Backed-up Successfully
2010-06-16 12:21:20 : <SLIP> dosnet.inf Backed-up Successfully
2010-06-16 12:22:49 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2010-06-16 12:23:03 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2010-06-16 12:55:40 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2010-06-16 12:55:40 : <SLIP> Created necessary directory structure for method 2.
2010-06-16 12:55:40 : <SLIP> Copying files necessary for method 2.
2010-06-16 12:55:42 : <SLIP> Extracted additional files necessary for method 2.
2010-06-16 12:55:42 : <SLIP> expanded setup.ex_ to setuporg.exe
2010-06-16 12:55:42 : <SLIP> SETUP.EX_ Backed-up Successfully
2010-06-16 12:55:42 : <SLIP> Compressed setup.exe to SETUP.EX_.
2010-06-16 12:55:42 : <SLIP> Method 2 setup.ex_ installed
2010-06-16 12:55:42 : <SLIP> Created \I386\presetup.cmd file.
2010-06-16 12:55:44 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2010-06-16 12:55:44 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2010-06-16 12:55:44 : <SLIP> Copied DriverPack Chipset to \OEM.
2010-06-16 12:55:44 : <SLIP> Copied DriverPack CPU to \OEM.
2010-06-16 12:55:45 : <SLIP> Copied DriverPack Graphics A to \OEM.
2010-06-16 12:55:47 : <SLIP> Copied DriverPack Graphics B to \OEM.
2010-06-16 12:55:48 : <SLIP> Copied DriverPack Graphics C to \OEM.
2010-06-16 12:55:48 : <SLIP> Copied DriverPack LAN to \OEM.
2010-06-16 12:55:48 : <SLIP> Copied DriverPack Mass Storage to \OEM.
2010-06-16 12:55:50 : <SLIP> Copied DriverPack Sound A to \OEM.
2010-06-16 12:55:51 : <SLIP> Copied DriverPack Sound B to \OEM.
2010-06-16 12:55:52 : <SLIP> Copied DriverPack WLAN to \OEM.
2010-06-16 12:55:57 : <SLIP> Renamed DriverPack DP_Bluetooth_wnt5_x86-32_1005b1.7z to DP_Bluet.7z in \OEM.
2010-06-16 12:55:58 : <SLIP> Renamed DriverPack DP_HID_wnt5_x86-32_1005.7z to DP_HID_w.7z in \OEM.
2010-06-16 12:55:58 : <SLIP> Renamed DriverPack DP_PrintersHP_wnt5_x86-32_71126.7z to DP_Print.7z in \OEM.
2010-06-16 12:55:59 : <SLIP> Renamed DriverPack DP_Runtimes_wnt5_x86-32_1005.7z to DPGR1005.7z in \OEM.
2010-06-16 12:55:59 : <SLIP> Renamed DriverPack DP_WebCam_wnt5_x86-32_10051.7z to DP_WebCa.7z in \OEM.
2010-06-16 12:55:59 : <SLIP> Copied DriverPacks to \OEM.
2010-06-16 12:55:59 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2010-06-16 12:56:00 : <SLIP> Updated \I386\winnt.sif to support method 2.
2010-06-16 12:56:00 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2010-06-16 12:56:00 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2010-06-16 12:56:00 : <SLIP> DP_Install_Tool was copied successfully
2010-06-16 12:56:00 : <SLIP> Slipstream finished in 35 minutes and 22 seconds.
2010-06-16 13:12:34 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "D:\XP 32bit"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "all"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl		= "CCC"
Nvidia_cpl	= "None"
2010-06-16 13:12:34 : <CLNP> Create a DPs_Base.log backup @ E:\Drivers and Utilities\BOOT Disks\Ultimate Boot CD for Windows\Driver Packs\WinXP x86\BASE 10.06\BASE Application\LogFiles\DPs_BASE_10-06-16_13-12.log
2010-06-16 13:12:34 : <CLNP> Program terminated.
]]> http://forum.driverpacks.net/profile.php?id=12124 2010-06-16T22:56:47Z http://forum.driverpacks.net/viewtopic.php?pid=38906#p38906 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> mr_smartepants wrote:
chumbo wrote:

DPs_3rd_party    = "no"

You didn't even try our HID Third Party DriverPack. sad
Try it using the "disc" source, then report back.
Jeff's correct, no Third Party DriverPacks are selectable to build BartPE plugins (yet).

Oh crap, I honestly didn't know I can do that.  Ugh.  I'm still learning so I appreciate your patience.  I'll read up on this feature.  Thank you.

]]> http://forum.driverpacks.net/profile.php?id=12124 2010-06-16T16:43:19Z http://forum.driverpacks.net/viewtopic.php?pid=38900#p38900 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> chumbo wrote:

DPs_3rd_party    = "no"

You didn't even try our HID Third Party DriverPack. sad
Try it using the "disc" source, then report back.
Jeff's correct, no Third Party DriverPacks are selectable to build BartPE plugins (yet).

]]> http://forum.driverpacks.net/profile.php?id=1602 2010-06-16T16:33:56Z http://forum.driverpacks.net/viewtopic.php?pid=38899#p38899 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> My bad... you did not state that this was related to BartPE plugins.

Third party DriverPacks are not selectable for BartPE... at least not in any current release of DriverPacks BASE.

you will need to add these manually to your PE disc.

thanks for reporting

Jeff

]]> http://forum.driverpacks.net/profile.php?id=1097 2010-06-16T16:30:49Z http://forum.driverpacks.net/viewtopic.php?pid=38898#p38898 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> Here's the INI contents:

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "E:\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= ""


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "no"
DP_CPU		= "no"
DP_Graphics_A	= "yes"
DP_Graphics_B	= "yes"
DP_Graphics_C	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "no"
DP_Sound_A	= "no"
DP_Sound_B	= "no"
DP_WLAN		= "yes"
DPs_3rd_party	= "no"
DP_MassStorage_textmode = "yes"

Here's the LOG:

2010-06-15 21:47:06 : <INIT> DriverPacks BASE 10.06 initialized.
2010-06-15 21:47:06 : <INIT> Host environment: WIN_7  X64 on a X64 CPU.
2010-06-15 21:47:06 : <INIT> Created temporary working directory.
2010-06-15 21:47:06 : <INIT> Imported proxy settings from Internet Explorer.
2010-06-15 21:47:06 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Chipset 10052!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack CPU 1005!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Graphics A 1005!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Graphics B 1005!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Graphics C 1005!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack LAN 10051!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Mass Storage 1006!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Mass Storage 901!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Sound A 1003!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Sound A 1006!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Sound B 1003!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack Sound B 1006!
2010-06-15 21:47:06 : <INIT> 	Detected DriverPack WLAN 10051!
2010-06-15 21:47:06 : <INIT> 	Detected 3rd Party DriverPack Runtimes 1005!
2010-06-15 21:47:06 : <INIT> 	Finished scanning.
2010-06-15 21:47:06 : <INIT> Detected settings file "E:\Drivers and Utilities\BOOT Disks\Ultimate Boot CD for Windows\Driver Packs\WinXP x86\BASE 10.06\BASE Application\DPs_BASE.ini".
2010-06-15 21:47:06 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2010-06-15 21:47:06 : <INIT> Imported settings from settings file.
2010-06-15 21:47:06 : <INIT> [OptionalSettings]\QSC BartPE default (no)    was set.
2010-06-15 21:47:06 : <GUI>  Initialized GUI.
2010-06-15 21:47:06 : <GUI>  Created a list of all available language files.
2010-06-15 21:47:06 : <GUI>  Set the last used language, English, as the GUI language.
2010-06-15 21:47:17 : <GUI>  Closed GUI.
2010-06-15 21:47:17 : <GUI>  Saved settings!
2010-06-15 21:47:17 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "E:\UBCD4Win\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= ""
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= ""


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= ""
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= ""
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "no"
DP_CPU		= "no"
DP_Graphics_A	= "yes"
DP_Graphics_B	= "yes"
DP_Graphics_C	= "yes"
DP_LAN		= "yes"
DP_MassStorage	= "no"
DP_Sound_A	= "no"
DP_Sound_B	= "no"
DP_WLAN		= "yes"
DPs_3rd_party	= "no"
DP_MassStorage_textmode = "yes"
2010-06-15 21:47:17 : <CLNP> Create a DPs_Base.log backup @ E:\Drivers and Utilities\BOOT Disks\Ultimate Boot CD for Windows\Driver Packs\WinXP x86\BASE 10.06\BASE Application\LogFiles\DPs_BASE_10-06-15_21-47.log
2010-06-15 21:47:17 : <CLNP> Program terminated.

Device description:
ELAN PS/2 Port Smart-Pad

HWIDs:
ACPI\ETD0001
*ETD0001

Nothing had failed, it just gets installed as a standard PS/2 mouse.  Thank you.

Regarding the third party, I'm stuck between a rock and hard place.  My notebook drivers only support Windows 7 so I can't find the XP 32bit driver on ASUS's site.  I also checked ELAN's site but they don't provide drivers directly so I'm forced to go through ASUS.

So I Googled for the XP driver and found the Wiki which I hoped would be acceptable.  I did test the driver under UBCD4Win and it did install successfully.

]]> http://forum.driverpacks.net/profile.php?id=12124 2010-06-16T15:45:23Z http://forum.driverpacks.net/viewtopic.php?pid=38896#p38896 <![CDATA[Re: [IMPL] ELAN PS/2 Port Smart-Pad]]> I'm sorry about that.  I'll read it and provide what you need in a little while.  Thank you.

]]> http://forum.driverpacks.net/profile.php?id=12124 2010-06-16T15:38:42Z http://forum.driverpacks.net/viewtopic.php?pid=38895#p38895