DriverPacks.net Forum - [REQ] Intel 82577LM

Re: [REQ] Intel 82577LM

null@example.com (mr_smartepants) — Mon, 12 Sep 2011 06:02:05 +0000

...still waiting...

Re: [REQ] Intel 82577LM

null@example.com (mr_smartepants) — Wed, 26 Jan 2011 21:46:38 +0000

If you can package up all the required files and upload to a site like mediafire, I might be able to add them to the pack.

Re: [REQ] Intel 82577LM

null@example.com (dlpirl) — Wed, 29 Dec 2010 22:45:12 +0000

Case closed. I've got an INF file that works for the e6410 NIC in BartPE. I tried to post it, bu tit is too long.

Re: [REQ] Intel 82577LM

null@example.com (dlpirl) — Mon, 27 Dec 2010 16:42:28 +0000

No response yet? I am not sure where to go from here. i have tried everything in thsi post and still am not able to get e6410 network drivers working in BartPE

Re: [REQ] Intel 82577LM

null@example.com (dlpirl) — Thu, 23 Dec 2010 20:12:19 +0000

I don't know what i could be doing wrong. i have the same issue not being able to get a dell E6410 NIC driver loaded. I followed the fix above, but it is not working for me.

After placing the PRO1000\Win32\NDIS5x driver in the pebuilder drivers\net folder, and overwriting the inf file with the RIS one, here's the output from BartPE "Load Network Support (DHCP/auto)"

BARTPE: Starting Network Support (client)
BARTPE: Detecting/installing drivers
Found Device: PCI\VEN_1180&DEV_E822&SUBSYS_040A1028&REV_03\4&DBAB9B0&0&01E2
No DriverNodes found for device.
Found Device: PCI\VEN_14E4&DEV_4353&SUBSYS_000E1028&REV_01\4&1D521A10&0&00E1
No DriverNodes found for device.
Found Device: PCI\VEN_8086&DEV_0046&SUBSYS_040A1028&REV_02\3&11583659&0&10
No DriverNodes found for device.
Found Device: PCI\VEN_8086&DEV_10EA&SUBSYS_040A1028&REV_05\3&11583659&0&C8
No DriverNodes found for device.
Found Device: PCI\VEN_8086&DEV_3B30&SUBSYS_040A1028&REV_05\3&11583659&0&FB
No DriverNodes found for device.
Found Device: PCI\VEN_8086&DEV_3B56&SUBSYS_040A1028&REV_05\3&11583659&0&D8
No DriverNodes found for device.
Found Device: USB\VID_0A5C&PID_5801&MI_00\7&1EB0F4E8&0&0000
No DriverNodes found for device.
Found Device: USB\VID_0A5C&PID_5801&MI_01\7&1EB0F4E8&0&0001
No DriverNodes found for device.

Re: [REQ] Intel 82577LM

null@example.com (Blarney) — Wed, 17 Nov 2010 22:38:30 +0000

Just registered to say thanks to those responding to this thread and to provide the fix that worked for me.

I'm using BartPE 3110a along with the DP_LAN_wnt5_x86-32_1011.7z driver pack to boot on an HP Ellitebook 8740w. I was having the same problem w/the Intel 82577LM.

So here's what I did after reading this thread:

~ I found the drivers for the 82577LM on the OEM Windows XP 32 bit OS. Just launch the Device Manager and look at the driver details for the NIC. Copy the files listed to the location; C:\pebuilder3110a\drivers\Net\foldername

~ Then use 7zip to extract the DP_LAN_wnt5_x86-32_1011.7z to a seperate folder.

~ Open the zip file; C:\D\L\I\RIS\e1k5132.zip and copy the e1k5132.inf to the location; C:\pebuilder3110a\drivers\Net\foldername. (Same folder you put the System32 driver files)

~ Then just build your disk.

This worked like a charm for me. Hope it works for you too!

Thanks again all.
~Blarney

Edit to add... looks like the previous poster found the same fix...

Re: [REQ] Intel 82577LM

null@example.com (juan512atx) — Wed, 17 Nov 2010 17:18:10 +0000

ok i got it all working..

I Downloaded the Intel 15.7 Driver and copied it over to the Drivers\Net Folder in a seperate driver folder. .i then extracted the RIS_INF file into the Drivers\Net Folder..
Sepcifics on what I did incase another noob like myself comes along for this exact issue.

Step1. Downloaded latest driver from intel site.
Step 2. Extract and look for the folder that has your driver in my case it was PRO1000\Win32\NDIS5x (specifically the E1K5132)
Step 3. Copy that entire content from NDIS5x folder (except the RIS_INF Folder) over to a seperate folder in C:\pebuilder3110a\drivers\Net
EX. C:\pebuilder3110a\drivers\Net\Dell
Step 4. Go into the RIS_INF Folder in the NDIS5x Driver folder and look for zip for the driver you needed.. again in my case its the E1K5132.zip
Step 5. Extract the INF file from the E1K5132.ZIP (in RIS_INF) and OVERWRITE the INF File you copied into C:\pebuilder3110a\drivers\Net\Dell

now just make your iso and your good to go.. no need to use infcachebuilder.. and good luck if you even attempt to use infcachebuilder the support and help with that piece of crap is useless.. sorry for bashing infcachebuilder but i tried using it and i couldnt get it to work and finding help with it was impossible or any type of tutorial on how to use it was also impossible!! so unless you created infcachebuilder good luck trying to use it!

so hopefully this helps someone else trying to get there e6410 to boot up with LAN drivers..

Re: [REQ] Intel 82577LM

null@example.com (juan512atx) — Wed, 17 Nov 2010 15:03:19 +0000

here is my hardware id PCI\VEN_8086&DEV_10EA&SUBSYS_040A1028&REV_05

Re: [REQ] Intel 82577LM

null@example.com (juan512atx) — Wed, 17 Nov 2010 14:51:29 +0000

im really confused now guys.. sorry i have been out of the office for awhile with a sick bug.. i clicked on your link "OverFlow" for DP BARTPE Tutorial.. and it says that the Driver Pack LAN is not available to setup like a plugin?? so do i extract the 7z LAN driver pack and copy them to my C:\pebuilder3110a\drivers\Net folder???

Re: [REQ] Intel 82577LM

null@example.com (OverFlow) — Sun, 14 Nov 2010 00:20:23 +0000

Provide the DL link to the driver and the HWIDs ...
CDOB hopefully will know what to do, he is a BartPE master

Re: [REQ] Intel 82577LM

null@example.com (juan512atx) — Sat, 13 Nov 2010 05:49:49 +0000

I already tried tgat and it failed to load the drivers

Re: [REQ] Intel 82577LM

null@example.com (OverFlow) — Sat, 13 Nov 2010 05:22:09 +0000

If adding the DriverPacks did not fix your NIC then disable the DriverPacks plugin and add your drivers manually

simply copy them to yourBartpefolder\drivers\yourdriverfolderhere\

and build and test, pretty easy

Re: [REQ] Intel 82577LM

null@example.com (juan512atx) — Sat, 13 Nov 2010 04:37:08 +0000

XP SP2.. yeah i was so frustrated earlier readying so many threads and everyonefixign the bartpe issue for the Dell Latitude E6410 laptop... im just trying to get the LAN drivers to work.... im a bit confused though on the driverpacks.. because since its a plug in and the inf files that the driver packs have are not located in the bartpe>i386>inf firectory.. so running the infcachebuild only changes bartpe>i386>inf correct?? when the plufin for driverpacks is holding untouched inf files??? i dont know im just really confused on what all i need to do.. maybe i just need a step by step direction on what i need to do

Re: [REQ] Intel 82577LM

null@example.com (OverFlow) — Sat, 13 Nov 2010 03:52:05 +0000

cool...
XP or 2k3 what SP level?
DriverPacks = LAN, MASS, WLAN and Graphics?

stock BartPE from bart website = Vanilla

Re: [REQ] Intel 82577LM

null@example.com (juan512atx) — Sat, 13 Nov 2010 00:24:52 +0000

Yes, I downloaded the driver from intel website.. I got the latest versions of everything from this site driver base and driver package. Running stock bart PE from bart web site with a few added plugins. Not sure what vanilla means.. HWID I will provide on monday when I'm back at work