<![CDATA[DriverPacks.net Forum - [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?id=4383 Sat, 20 Feb 2010 06:21:46 +0000 PunBB <![CDATA[Re: [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36840#p36840 Marked solved!

Thanks again you have made the DriverPacks better for everyone!

Since you have your hands in the cookie jar anyway I have also added you to the testing team!

Welcome aboard!

Jeff

]]> Sat, 20 Feb 2010 06:21:46 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36840#p36840 <![CDATA[Re: [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36824#p36824 DriverPacks BASE 10.02.19 with the latest MassStorage pack

worked...

Thanks
Mark

]]> Fri, 19 Feb 2010 13:46:03 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36824#p36824 <![CDATA[Re: [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36818#p36818 The Fault is mine I had implement a special case into BASE and that DriverPack.
It was a rare case where a driver in the DriverPack MassStorage replaced more than one native driver in windows

In  DP_MassStorage_wnt5_x86-32_100125\D\M\C\ the file CPQ32FS2.sys replaces I386\symc8xx.sy_,  symc810.sy_ and sym_hi.sy_.

While I corrected this situation for a normal Disc method slipstream did not address the issue for BartPE... I believe that I have now.
I is possable i will need to do some additional work to fully implement this special case...


try this DriverPacks BASE 10.02.19

Thank for reporting you have helped us make DriverPacks better for everyone and I bestow upon you the coveted 'Hero of the day' award.

Please test and report

]]> Fri, 19 Feb 2010 07:11:37 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36818#p36818 <![CDATA[Re: [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36812#p36812 Clean Volume License sp3.
MassStorage
LAN
WLAN

It is strange that pack 9.0.1 works and 10.0.1 doesn't.

I have been using Reatogo and driverpacks for years, I don't use Nlite or RyanVM for my Bartpe disks.


Thanks
Mark

]]> Thu, 18 Feb 2010 12:52:09 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36812#p36812 <![CDATA[Re: [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36807#p36807 did you use a clean source or did you use a source slipstreamed with DriverPacks?

]]> Thu, 18 Feb 2010 10:36:28 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36807#p36807 <![CDATA[Re: [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36794#p36794 I tried DPs_BASE_100124 with DP_MassStorage_wnt5_x86-32_901.7z
and it worked, so it is something with that driverpack.

Line 20599
PCI\VEN_1000&DEV_0407&SUBSYS_34328086="mraid35x"


PCI\VEN_1000&DEV_0408&SUBSYS_34318086="mraid35x"
PCI\VEN_1000&DEV_0408&SUBSYS_10651734="mraid35x"
PCI\VEN_1000&DEV_0408&SUBSYS_004D1025="mraid35x"
PCI\VEN_1000&DEV_0408&SUBSYS_00028086="mraid35x"
PCI\VEN_1000&DEV_0408&SUBSYS_00021000="mraid35x"
PCI\VEN_1000&DEV_0408&SUBSYS_00011000="mraid35x"
PCI\VEN_1000&DEV_0407&SUBSYS_34328086="mraid35x"
PCI\VEN_1000&DEV_0407&SUBSYS_05328086="mraid35x"
PCI\VEN_1000&DEV_0407&SUBSYS_05321000="mraid35x"
PCI\VEN_1000&DEV_0407&SUBSYS_05311000="mraid35x"
PCI\VEN_1000&DEV_0407&SUBSYS_05308086="mraid35x"

]]> Wed, 17 Feb 2010 16:00:06 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36794#p36794 <![CDATA[Re: [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36793#p36793 Same Error using The new DPs_BASE_100124 and DP_MassStorage_wnt5_x86-32_100125.7z

"Line 20599 of the INF file \I386\TXTSETUP.SIF\ is invalid, setup cannot continue"

="sym_hi"
is the line in refrence

here are the surrounding lines fgrom txtsetup.inf

PCI\VEN_1000&DEV_0055&SUBSYS_34918086="megasr"
PCI\VEN_1000&DEV_0055&SUBSYS_346d8086="megasr"
PCI\VEN_1000&DEV_0055&SUBSYS_346c8086="megasr"
PCI\VEN_1000&DEV_0055&SUBSYS_30051000="megasr"
PCI\VEN_1000&DEV_0055&SUBSYS_30011000="megasr"
PCI\VEN_1000&DEV_0055&SUBSYS_00231170="megasr"
GenNvRaidDisk="nvraid"
*NVRAIDBUS="nvraid"
*NVRAID20="nvraid"
*_NVRAIDBUS="nvraid"
="sym_hi"
PCI\VEN_9005&DEV_801F="adpu320"
PCI\VEN_9005&DEV_801E="adpu320"
PCI\VEN_9005&DEV_801D="adpu320"
PCI\VEN_9005&DEV_8017&SUBSYS_00459005="adpu320"
PCI\VEN_9005&DEV_8017&SUBSYS_00449005="adpu320"
PCI\VEN_9005&DEV_8016&SUBSYS_00409005="adpu320"
PCI\VEN_9005&DEV_8015&SUBSYS_00409005="adpu320"
PCI\VEN_9005&DEV_8014&SUBSYS_00449005="adpu320"
PCI\VEN_9005&DEV_8012&SUBSYS_00429005="adpu320"
PCI\VEN_9005&DEV_8011&SUBSYS_00419005="adpu320"
PCI\VEN_9005&DEV_8010&SUBSYS_00409005="adpu320"
PCI\VEN_9005&DEV_800F&SUBSYS_005F9005="adpu320"
PCI\VEN_9005&DEV_800F="adpu320"
PCI\VEN_9005&DEV_8000&SUBSYS_00609005="adpu320"
PCI\VEN_9005&DEV_0288&SUBSYS_02CD9005="aacsas"
PCI\VEN_9005&DEV_0288&SUBSYS_02CC9005="aacsas"
PCI\VEN_9005&DEV_0288&SUBSYS_02CB9005="aacsas"
PCI\VEN_9005&DEV_0286&SUBSYS_95801014="aacsas"
PCI\VEN_9005&DEV_0286&SUBSYS_02A69005="aacsas"
PCI\VEN_9005&DEV_0286&SUBSYS_02A19005="aacsas"
PCI\VEN_9005&DEV_0286&SUBSYS_02A09005="aacsas"
PCI\VEN_9005&DEV_0286&SUBSYS_029F9005="aac"
PCI\VEN_9005&DEV_0286&SUBSYS_029E9005="aac"
PCI\VEN_9005&DEV_0286&SUBSYS_029D9005="aacsas"
PCI\VEN_9005&DEV_0286&SUBSYS_029C9005="aacsas"
PCI\VEN_9005&DEV_0286&SUBSYS_029B9005="aacsas"

]]> Wed, 17 Feb 2010 15:27:12 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36793#p36793 <![CDATA[Re: [SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36791#p36791 http://driverpacks.sytes.net/driverpack … 100124.exe

try that version of base with that verson of mass wink

]]> Wed, 17 Feb 2010 14:10:59 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36791#p36791 <![CDATA[[SLVD] ="sym_hi" DP_MassStorage_wnt5_x86-32_100125.7z TextSetup.sif]]> http://forum.driverpacks.net/viewtopic.php?pid=36765#p36765 Can someone move this to MassStorage, I put it in the wrong area, Thanks!!!!

I made my latest BartPE CD using REATOGO & DP_Base8.12.5 & DP_MassStorage_wnt5_x86-32_100125.7z.
The slipstream works but on bootup I get Invalid entry in Line 20599 TEXTSETUP.SIF.  Here the lines before and after the error: ="sym_hi"

GenNvRaidDisk="nvraid"
*NVRAIDBUS="nvraid"
*NVRAID20="nvraid"
*_NVRAIDBUS="nvraid"
="sym_hi"
PCI\VEN_9005&DEV_801F="adpu320"
PCI\VEN_9005&DEV_801E="adpu320"
PCI\VEN_9005&DEV_801D="adpu320"

DP_Base.log:

2010-02-16 15:25:51 : <INIT> DriverPacks BASE 8.12.5 initialized.
2010-02-16 15:25:51 : <INIT> Host environment: WIN_XP Service Pack 3 on X86 CPU.
2010-02-16 15:25:51 : <INIT> Created temporary working directory.
2010-02-16 15:25:51 : <INIT> Imported proxy settings from Internet Explorer.
2010-02-16 15:25:51 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-02-16 15:25:51 : <INIT> 	Detected DriverPack Chipset 1002!
2010-02-16 15:25:51 : <INIT> 	Detected DriverPack CPU 912!
2010-02-16 15:25:51 : <INIT> 	Detected DriverPack LAN 1002!
2010-02-16 15:25:51 : <INIT> 	Detected DriverPack MassStorage 100125!
2010-02-16 15:25:51 : <INIT> 	Detected DriverPack WLAN 1002!
2010-02-16 15:25:51 : <INIT> 	Could not detect any 3rd party DriverPacks for wnt5_x86-32.
2010-02-16 15:25:51 : <INIT> 	Finished scanning.
2010-02-16 15:25:51 : <INIT> Detected settings file "C:\CDinst\REATOGO-270\plugin\DriverPacks.net\BASE\DPs_BASE.ini".
2010-02-16 15:25:51 : <INIT> [Settings]\DPsMethod not specified: default (2) was set.
2010-02-16 15:25:51 : <INIT> [Settings]\finisherMethod not specified: default (GUIRunOnce) was set.
2010-02-16 15:25:51 : <INIT> [OptionalSettings]\KTD not specified: default (none) was set.
2010-02-16 15:25:51 : <INIT> [OptionalSettings]\QSC not specified: default (yes) was set.
2010-02-16 15:25:51 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2010-02-16 15:25:51 : <INIT> [OptionalSettingsOther]\Nvidia_cpl not specified: default (None) was set.
2010-02-16 15:25:51 : <INIT> wnt5_x86-32_bartpe is the selected installation platform .
2010-02-16 15:25:51 : <INIT> Imported settings from settings file.
2010-02-16 15:25:51 : <INIT> [OptionalSettings]\QSC BartPE default (no)    was set.
2010-02-16 15:25:51 : <GUI>  Initialized GUI.
2010-02-16 15:25:51 : <GUI>  Created a list of all available language files.
2010-02-16 15:25:51 : <GUI>  Set the last used language, English, as the GUI language.
2010-02-16 15:25:54 : <GUI>  Closed GUI.
2010-02-16 15:25:54 : <GUI>  Saved settings!
2010-02-16 15:25:54 : <CLNP> Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "bartpe"
; trailing backslash is allowed, but not necessary
location	= "C:\CDinst\REATOGO-270\plugin"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "no"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "no"
DP_CPU		= "no"
DP_LAN		= "yes"
DP_MassStorage	= "yes"
DP_WLAN		= "yes"
DP_MassStorage_textmode = "yes"
2010-02-16 15:25:54 : <CLNP> Create a DPs_Base.log backup @ C:\CDinst\REATOGO-270\plugin\DriverPacks.net\BASE\LogFiles\DPs_BASE_10-02-16_15-25.log
2010-02-16 15:25:54 : <CLNP> Program terminated.

I went back and used:

DP_MassStorage_wnt5_x86-32_901.7z

And it worked. So there is something missing on DP_MassStorage_wnt5_x86-32_100125.7z Pack

I'm using VMware to test my BartPE disks.

Thanks
Mark

]]> Tue, 16 Feb 2010 20:33:03 +0000 http://forum.driverpacks.net/viewtopic.php?pid=36765#p36765