DriverPacks.net Forum - Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

Re: Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

null@example.com (Helmi) — Tue, 16 Feb 2010 11:15:34 +0000

OverFlow wrote:

To put it bluntly it is ridiculous to act like it doesn't work if you have not even tried

Schrödinger's cat syndrome, anyone?

Re: Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

null@example.com (OverFlow) — Tue, 16 Feb 2010 04:05:17 +0000

AHCI has been included for years...

asked and answered - in the other thread...

More specifically we have always included the Intel matrix storage manager drivers
which include the full set of drivers IDE and AHCI and RAID...

Have you tested it???

To put it bluntly it is ridiculous to act like it doesn't work if you have not even tried
The thread and drivers you keep referring to are from 2008, over two years ago... a lot has changed since then
And even if it was working with DriverPacks BASE 8.12.x that is totally meaningless to me... since I pretty much rewrote the entire mass storage section of the code with DriverPacks BASE 10.01.x

- The only valid feedback will require DriverPacks BASE 10.x and DriverPack MassStorage 10.x and an Intel AHCI controller.

Test that and report on that !

If it fails, then we have something to talk about.
nobody else is reporting / has reported any problems - which leads me to believe there is no problem... feel free to show me that I'm wrong.

If its broken we'll fix it... THEN you can report that the problem no longer exists anywhere and everywhere
I don't know if it is broken unless somebody tests it... (perhaps some of your buddies who said it doesn't work may like to try it too)
It is irrelevant if it WAS broke in 2008, is it broken today?

Many of roguespears "fixes" were simply to use RIS drivers instead of the mainstream ones...
If that still needs to be done, then we will... We don't know if no one reports it!

Intel's drivers, DriverPacks BASE and DriverPack MassStorage have changed drastically in two years.
Test DriverPacks BASE 10 and DriverPack MassStorage 10 and report...

Either it still needs fixed or it doesn't and it really is just that Simple...
So does it still need fixed or not?
- Please tell me if it does need fixed still, Erik and I WILL fix it!
- Please tell me and everyone else if it is already resolved

Re: Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

null@example.com (ChiefZeke) — Mon, 15 Feb 2010 22:05:40 +0000

More info - I had mentioned AHCI here: http://forum.driverpacks.net/viewtopic.php?id=4029 and never saw an answer indicating AHCI had been added to Mass Storage, or I missed something somewhere.

Re: Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

null@example.com (ChiefZeke) — Mon, 15 Feb 2010 21:57:40 +0000

OverFlow wrote:

Well definately don't use both at the same time .
If you have the hardware to test on that hardware please do (with our pack) and report the result .
If it works then we can pass on the result to Ryan and RogueSpear . Please note those pack are from May of 2008
I made considerable updates to the mass storage code in that release the problem may no longer exist, if it does let's get it fixed .
PS Donors are automatically made members of the testing team

The Mass Storage driver pack I have is: DP_MassStorage_wnt5_x86-32_100125.7z dated Jan 2010 - (don't have one dated May 2008) - does this version include AHCI drivers?

I was unaware of the donor to tester being automatic.

Re: Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

null@example.com (OverFlow) — Mon, 15 Feb 2010 01:47:21 +0000

Well definately don't use both at the same time .

If you have the hardware to test on that hardware please do (with our pack) and report the result .
If it works then we can pass on the result to Ryan and RogueSpear . Please note those pack are from May of 2008

I made considerable updates to the mass storage code in that release the problem may no longer exist, if it does let's get it fixed .

PS Donors are automaticaly made members of the testing team

Re: Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

null@example.com (ChiefZeke) — Sun, 14 Feb 2010 22:49:07 +0000

OverFlow wrote:

So this is a report of success with the Beta version of BASE? or did I miss something?
I notice you skipped mass text mode?
Thanks for reporting sir!
PS please report on beta / test versions in the testing team forum

I wasn't sure on where to mention the results as I don't believe I am actually a member of the testing team so I figured feedback would work.

I'm guessing your question about mass text mode refers to DP_Mass Storage - that was omitted because the folks at http://www.ryanvm.net/forum/viewtopic.php?t=8101 when I asked about AHCI drivers said to use these from Rogue Spear: RogueSpearAddonsM2-XPSP3-NoKtD_8.09.7z and MassStorageAddons_IaStor_8.5.0.1032.7z and to make sure not to use Driver Packs Mass Storage. If the Driver Pack's Mass Storage suppprts AHCI then I can use and pass on the word in the Ryan and Rogue Spear forums.

Re: Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

null@example.com (OverFlow) — Sun, 14 Feb 2010 04:32:37 +0000

So this is a report of success with the Beta version of BASE? or did I miss something?
I notice you skipped mass text mode?

Thanks for reporting sir!

PS please report on beta / test versions in the testing team forum

Results using Base 10.01.24 from within RVM_Integrator_1.6.1 beta 2.1

null@example.com (ChiefZeke) — Sat, 13 Feb 2010 23:19:34 +0000

Back in November I opted to make a new XP Pro w/SP3 CD updated as of that date to get ready for Windows 7. That failed when I got Fatal Error code 800b0100 and I had to do a repair install using a CD a had created almost a year earlier. (That worked.)

Doing a bit of reading in forums and some research I opted to try Microsoft's PC2007 Virtual Machine. That worked and I determined that the Fatal Error was caused by a corruption in the XP w/SP3 copy of the CD I had on my hard drive. It seems the FAT32 to NTFS conversion I had done on the drive partition that contained the copy of the CD was at fault. I deleted all of those files and re-copied the XP Pro w/SP3 CD to the same partition and tried again; this time successfully. What follows is the log file created when I ran DriverPacks Base to create the new CD. Note that no errors occured during the install of XP in the virtual machine.

2010-02-13 13:51:39 :  DriverPacks BASE 10.01.24 initialized.
2010-02-13 13:51:39 :  Host environment: WIN_XP Service Pack 3 X86 on a X64 CPU.
2010-02-13 13:51:39 :  Created temporary working directory.
2010-02-13 13:51:39 :  Imported proxy settings from Internet Explorer.
2010-02-13 13:51:39 :  Start scanning for DriverPacks for the wnt5_x86-32 platform.
2010-02-13 13:51:39 :  	Detected DriverPack Chipset 1002r1!
2010-02-13 13:51:39 :  	Detected DriverPack CPU 912!
2010-02-13 13:51:39 :  	Detected DriverPack Graphics A 1002r1!
2010-02-13 13:51:39 :  	Detected DriverPack LAN 1002r4!
2010-02-13 13:51:39 :  	Detected DriverPack Sound A 1001b2!
2010-02-13 13:51:39 :  	Detected 3rd Party DriverPack HID 90204!
2010-02-13 13:51:39 :  	Detected 3rd Party DriverPack Misc 90909!
2010-02-13 13:51:39 :  	Detected 3rd Party DriverPack Monitor 908130!
2010-02-13 13:51:39 :  	Detected 3rd Party DriverPack USB 80911!
2010-02-13 13:51:39 :  	Finished scanning.
2010-02-13 13:51:39 :  Detected settings file "G:\DriverPacks\DPs_BASE.ini".
2010-02-13 13:51:39 :  Windows XP Professional -  Retail SP3 detected.
2010-02-13 13:51:39 :  wnt5_x86-32_disc is the selected installation platform .
2010-02-13 13:51:39 :  Imported settings from settings file.
2010-02-13 13:51:39 :   Initialized GUI.
2010-02-13 13:51:39 :   Created a list of all available language files.
2010-02-13 13:51:39 :   Set the last used language, English, as the GUI language.
2010-02-13 13:51:48 :   Refreshed UpdateChecker with success.
2010-02-13 13:53:17 :   Saved settings!
2010-02-13 13:53:17 :   Closed GUI.
2010-02-13 13:53:17 :   Selected module: mod_slip_wxp_x86-32_disc_m2.
2010-02-13 13:53:21 :  Removed all attributes from \I386.
2010-02-13 13:53:21 :  Deleted old DriverPacks.
2010-02-13 13:53:21 :  Deleting old method 2 related files.
2010-02-13 13:53:21 :  Deleted \OEM\bin\DevPath.exe.
2010-02-13 13:53:21 :  Deleted \OEM\bin\7-zip32.dll.
2010-02-13 13:53:21 :  Deleted \OEM\bin\DPsFnshr.7z.
2010-02-13 13:53:21 :  Deleted \OEM\bin\DPsFnshr.ini.
2010-02-13 13:53:21 :  Deleted \OEM\bin\un7zip.exe.
2010-02-13 13:53:21 :  Deleted \OEM\DP_Install_Tool.cmd.
2010-02-13 13:53:21 :  Deleted \OEM\DPINST.exe.
2010-02-13 13:53:21 :  Deleted \OEM\DPInst.xml.
2010-02-13 13:53:21 :  \I386\winnt.org was not found, \I386\winnt.sif was not restored.
2010-02-13 13:53:21 :  Either txtsetup.org or dosnet.org was not found. The removal of 
2010-02-13 13:53:21 :  any Service Packs we may have added with Driverpacks and or 
2010-02-13 13:53:21 :  the removal of any Mass Storage textmode drivers was skipped
2010-02-13 13:53:26 :  Verified method 2 references don't exist in txtsetup.sif or dosnet.inf.
2010-02-13 13:53:27 :  Cleaned up \$OEM$\cmdlines.txt.
2010-02-13 13:53:27 :  Deleted \$OEM$\ROE.exe.
2010-02-13 13:53:27 :  Necessary directory structure for method 2 already exists.
2010-02-13 13:53:27 :  Copying files necessary for method 2.
2010-02-13 13:53:29 :  Extracted additional files necessary for method 2.
2010-02-13 13:53:30 :  expanded setup.ex_ to setuporg.exe
2010-02-13 13:53:30 :  SETUP.EX_ Backed-up Successfully
2010-02-13 13:53:31 :  Method 2 setup.ex_ installed
2010-02-13 13:53:31 :  Created \I386\presetup.cmd file.
2010-02-13 13:53:31 :  txtsetup.sif Backed-up Successfully
2010-02-13 13:53:31 :  dosnet.inf Backed-up Successfully
2010-02-13 13:53:31 :  Updated \I386\txtsetup.sif to support method 2.
2010-02-13 13:53:33 :  Updated \I386\dosnet.inf to support method 2.
2010-02-13 13:53:33 :  Copied DriverPack Chipset to \OEM.
2010-02-13 13:53:33 :  Copied DriverPack CPU to \OEM.
2010-02-13 13:53:37 :  Copied DriverPack Graphics A to \OEM.
2010-02-13 13:53:37 :  Copied DriverPack LAN to \OEM.
2010-02-13 13:53:41 :  Copied DriverPack Sound A to \OEM.
2010-02-13 13:53:43 :  Renamed DriverPack DPC1002r1.7z to DPC1002r.7z in \OEM.
2010-02-13 13:53:43 :  Renamed DriverPack DPGA1002r1.7z to DPGA1002.7z in \OEM.
2010-02-13 13:53:43 :  Renamed DriverPack DPL1002r4.7z to DPL1002r.7z in \OEM.
2010-02-13 13:53:43 :  Renamed DriverPack DPSA1001b2.7z to DPSA1001.7z in \OEM.
2010-02-13 13:53:43 :  Renamed DriverPack DP_HID_wnt5_x86-32_90204.7z to DP_HID_w.7z in \OEM.
2010-02-13 13:53:43 :  Renamed DriverPack DP_Misc_wnt5_x86-32_90909.7z to DP_Misc_.7z in \OEM.
2010-02-13 13:53:43 :  Renamed DriverPack DP_Monitor_wnt5_x86-32_908130.7z to DP_Monit.7z in \OEM.
2010-02-13 13:53:43 :  Renamed DriverPack DP_USB_wnt5_x86-32_80911.7z to DP_USB_w.7z in \OEM.
2010-02-13 13:53:43 :  Copied DriverPacks to \OEM.
2010-02-13 13:53:43 :  Will not slipstream patches, Service Pack 3 was detected.
2010-02-13 13:53:46 :  Updated \I386\winnt.sif to support method 2.
2010-02-13 13:53:46 :  Updated DPsFnshr.ini to disable KTD.
2010-02-13 13:53:46 :  Updated \I386\winnt.sif's GUIRunOnce section.
2010-02-13 13:54:48 :  DP_Install_Tool was copied successfully
2010-02-13 13:54:48 :  Slipstream finished in 1 minutes and 31 seconds.
2010-02-13 13:54:52 :  Temporary working directory successfully deleted.
- = DriverPacks BASE ini settings used = -
[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "G:\RyanVM\XPPro#1Integrated"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; , to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset	= "yes"
DP_CPU		= "yes"
DP_Graphics_A	= "yes"
DP_LAN		= "yes"
DP_Sound_A	= "yes"
DPs_3rd_party	= "yes"
DP_MassStorage_textmode = "no"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP/None, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming Graphics DriverPack)
; 1/2/3/None, use Nvidia Control Panel - 1 = Old, 2 = New, 3 = Both, None
ATI_cpl		= "CCC"
Nvidia_cpl	= "None"
2010-02-13 13:54:52 :  Create a DPs_Base.log backup @ G:\DriverPacks\LogFiles\DPs_BASE_10-02-13_13-54.log
2010-02-13 13:54:52 :  Program terminated.