DriverPacks.net Forum - Which Driver Pack do I need?

Re: Which Driver Pack do I need?

null@example.com (phyllis01) — Thu, 21 Jan 2010 16:55:04 +0000

Losing my drivers/firmware in my pc gets me mad. Thanks for this thread. I found some useful forum.

Re: Which Driver Pack do I need?

null@example.com (OverFlow) — Wed, 25 Nov 2009 01:12:56 +0000

a simple search of MS for XP Repair yields http://www.microsoft.com/windowsxp/usin … oug92.mspx

MS wrote:

How do you perform a reinstallation of Windows XP, sometimes called a repair installation?
Configure your computer to start from the CD-ROM drive. For more information about how to do this, refer to your computer's documentation or contact your computer manufacturer. Then insert your Windows XP Setup CD, and restart your computer.
1. When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD.
2. Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen.
3. Do not choose the option to press R to use the Recovery Console.
4. In the Windows XP Licensing Agreement, press F8 to agree to the license agreement.
5. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
6. Follow the instructions on the screen to complete Setup.

I don't normaly recomend doing a repair, Personaly I would reload the OS, But I am a tech .
an inexperienced person can get through a repair fairly easy, Reloading is harder (requires backup and restore of user data ect.)

You might also download DriverPacks BASE go to the update page and get all the packs then use DriverPacks BASE to create a SAD folder that can be used to update all the drivers in your system. This option is a little more involved but may just solve your issue...

Moved to other

welcome to DriverPacks! best of luck!

Re: Which Driver Pack do I need?

null@example.com (DrGaskopf) — Tue, 24 Nov 2009 15:51:49 +0000

Also I just downloaded and installed the chip driver pack from the samsung website since its a samsung notebook. Still the usb ports do not work. I did the scan again:

===========
PCI Devices
===========
PCI\VEN_1180&DEV_0476&SUBSYS_C01A144D&REV_B3\4&AD1B67F&0&48F0: Ricoh R/RL/5C476(II) oder kompatibler CardBus-Controller
PCI\VEN_1180&DEV_0552&SUBSYS_C01A144D&REV_08\4&AD1B67F&0&49F0: OHCI-konformer IEEE 1394-Hostcontroller
PCI\VEN_1180&DEV_0592&SUBSYS_C01A144D&REV_08\4&AD1B67F&0&4BF0: Ricoh Memory Stick Bus Host Adapter
PCI\VEN_1180&DEV_0822&SUBSYS_C01A144D&REV_17\4&AD1B67F&0&4AF0: SDA-Standard konformer SD-Hostcontroller
PCI\VEN_14E4&DEV_170C&SUBSYS_C01A144D&REV_02\4&AD1B67F&0&28F0: Broadcom 440x 10/100 Integrated Controller
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_D3\3&B1BFB68&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_2590&SUBSYS_00000000&REV_03\3&B1BFB68&0&00 : Mobile Intel(R) 915GM/PM/GMS/910GML Express Processor to DRAM Controller - 2590
PCI\VEN_8086&DEV_2592&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&10 : Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
PCI\VEN_8086&DEV_2641&SUBSYS_00000000&REV_03\3&B1BFB68&0&F8 : Intel(R) 82801FBM LPC Interface Controller - 2641
PCI\VEN_8086&DEV_2658&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&E8 : Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
PCI\VEN_8086&DEV_2659&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&E9 : Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
PCI\VEN_8086&DEV_265A&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&EA : Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
PCI\VEN_8086&DEV_265B&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&EB : Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
PCI\VEN_8086&DEV_265C&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&EF : Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
PCI\VEN_8086&DEV_2660&SUBSYS_00000000&REV_03\3&B1BFB68&0&E0 : Intel(R) 82801FB/FBM PCI Express Root Port - 2660
PCI\VEN_8086&DEV_266A&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&FB : Intel(R) 82801FB/FBM SMBus Controller - 266A
PCI\VEN_8086&DEV_266D&SUBSYS_2115144D&REV_03\3&B1BFB68&0&F3 : SENS LT56ADW Modem
PCI\VEN_8086&DEV_266E&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&F2 : SoundMAX Integrated Digital Audio
PCI\VEN_8086&DEV_266F&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&F9 : Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
PCI\VEN_8086&DEV_2792&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&11 : Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
PCI\VEN_8086&DEV_4220&SUBSYS_27318086&REV_05\4&AD1B67F&0&38F0: Intel(R) PRO/Wireless 2200BG Network Connection
21 matching device(s) found.

===========
USB Devices
===========
USB\ROOT_HUB\4&12E3A8D0&1
USB\ROOT_HUB\4&2149F547&1
USB\ROOT_HUB\4&28C1D064&1
USB\ROOT_HUB\4&2BDAFD77&1
USB\ROOT_HUB20\4&326C91CF&1
5 matching device(s) found.

=============
Input Devices
=============
No matching devices found.

============
ACPI Devices
============
ACPI\ACPI0003\2&DABA3FF&0 : Microsoft-Netzteil
ACPI\FIXEDBUTTON\2&DABA3FF&0 : ACPI-Schalter
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_13\_0 : Intel(R) Pentium(R) M processor 1.73GHz
ACPI\INT0800\4&3863886D&0 : Intel(R) 82802 Firmwarehub
ACPI\PNP0000\4&3863886D&0 : Programmierbarer Interruptcontroller
ACPI\PNP0100\4&3863886D&0 : Systemzeitgeber
ACPI\PNP0103\4&3863886D&0 : High Precision Event Timer
ACPI\PNP0200\4&3863886D&0 : DMA-Controller
ACPI\PNP0303\4&3863886D&0 : Standardtastatur (101/102 Tasten) oder Microsoft Natural Keyboard (PS/2)
ACPI\PNP0A05\1 : Standardbus
ACPI\PNP0A05\2 : Standardbus
ACPI\PNP0A08\2&DABA3FF&0 : PCI-Bus
ACPI\PNP0B00\4&3863886D&0 : System CMOS/Echtzeituhr
ACPI\PNP0C02\1 : Hauptplatinenressourcen
ACPI\PNP0C02\2 : Hauptplatinenressourcen
ACPI\PNP0C04\4&3863886D&0 : Numerischer Coprozessor
ACPI\PNP0C09\1 : Eingebetteter, Microsoft ACPI-konformer Controller
ACPI\PNP0C0A\1 : Microsoft ACPI-konforme Kontrollmethodenbatterie
ACPI\PNP0C0B\2&DABA3FF&0 : ACPI-Lüfter
ACPI\PNP0C0C\2&DABA3FF&0 : ACPI-Einschaltknopf
ACPI\PNP0C0D\2&DABA3FF&0 : ACPI-Deckel
ACPI\PNP0C0E\2&DABA3FF&0 : ACPI-Sleepknopf
ACPI\PNP0F13\4&3863886D&0
ACPI\THERMALZONE\THRM : ACPI-Thermozone
ACPI_HAL\PNP0C08\0 : Microsoft ACPI-konformes System
ROOT\ACPI_HAL\0000 : ACPI-Uniprozessor-PC
26 matching device(s) found.

============
HDA Audio
============
No matching devices found.

============
RAID Devices
============
PCI\VEN_8086&DEV_266F&SUBSYS_C01A144D&REV_03\3&B1BFB68&0&F9
Name: Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
Hardware ID's:
PCI\VEN_8086&DEV_266F&SUBSYS_C01A144D&REV_03
PCI\VEN_8086&DEV_266F&SUBSYS_C01A144D
PCI\VEN_8086&DEV_266F&CC_01018A
PCI\VEN_8086&DEV_266F&CC_0101
Compatible ID's:
PCI\VEN_8086&DEV_266F&REV_03
PCI\VEN_8086&DEV_266F
PCI\VEN_8086&CC_01018A
PCI\VEN_8086&CC_0101
PCI\VEN_8086
PCI\CC_01018A
PCI\CC_0101
1 matching device(s) found.

Re: Which Driver Pack do I need?

null@example.com (DrGaskopf) — Tue, 24 Nov 2009 15:02:46 +0000

===========
USB Devices
===========
USB\ROOT_HUB\4&12E3A8D0&1
USB\ROOT_HUB\4&2149F547&1
USB\ROOT_HUB\4&28C1D064&1
USB\ROOT_HUB\4&2BDAFD77&1
USB\ROOT_HUB20\4&326C91CF&1
5 matching device(s) found.

=============
Input Devices
=============
No matching devices found.

============
HDA Audio
============
No matching devices found.

Re: Which Driver Pack do I need?

null@example.com (DrGaskopf) — Tue, 24 Nov 2009 14:18:48 +0000

by inserting the XP CD and not running the Recovery Console the screen or two...

What do you mean? I dont understand? Not run the recovery console ? So what should I run?

Re: Which Driver Pack do I need?

null@example.com (Stoner) — Tue, 24 Nov 2009 13:27:33 +0000

You did post it in the wrong forum but we all make mistakes I think it should have been posted under "Other" but don't worry a member of staff will probably move it to the correct section.

Did you get a CD with the mouse you bought? If so then the drivers you need will be stored on it simply insert it into your computer and it should autorun.

Base is the DriverPacks Base software which is written for slipstreaming drivers into an installation CD, nLite is a front end GUI for making many customisations to an installation CD. Neither of these you don't need at this time.

You could try doing a repair of your OS by inserting the XP CD and not running the Recovery Console the screen or two after that should allow you to perform a repair which will keep all you data but it may solve your problem.

Or you could try downloading the following tool;

http://driverpacks.sytes.net/driverpacks/Nightlies/SaveHwids.exe

This is virus free so do not worry it will run and then open Notepad with a lot of information in it copy and paste its contents in your next post. What it does is it scans your system and searches all your hardware and comes back with detailed information which may help us solve your problem.

Hope this helps.

Stoner.

Which Driver Pack do I need?

null@example.com (DrGaskopf) — Tue, 24 Nov 2009 12:42:57 +0000

Im new here and Im not sure if Im posting this in the right forum. I have a Samsung Notebook and about a week ago I bought a simple wireless optical usb mouse. When connecting it (and several other mice) my hardware manager just told me that no driver could be found. The device therefore didnt work. That led me to believe that maybe something is wrong with the usb drivers in the first place. So I deinstalled all the usb drivers thinking that I could easily install them with my windows xp cd. This, however, I could not. So now Im stuck with 3 usb ports that dont work and no mouse. Which driver pack do I need? And what is Base or Nlite that everyone talks about here? Do I need that?
Please help.