DriverPacks.net Forum - [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (OverFlow) — Sat, 19 Jun 2010 18:08:50 +0000

Is this fixed in 10.06?

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (OverFlow) — Wed, 07 Oct 2009 15:05:20 +0000

there have been several revisions of nightlies since this post... were not quite done yet... stay tuned!

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (thadizzy) — Wed, 07 Oct 2009 12:00:37 +0000

Any progress regarding this? Like VeeDub mentioned v8.05 works perfectly fine, so copy the order things load from the old version?
This is a pretty big issue for me so I'd love any update regarding this. Thanks for a great job.

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (OverFlow) — Fri, 07 Aug 2009 22:31:13 +0000

the oreder they appear in the ini is the order they appear in the sif

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (JakeLD) — Fri, 07 Aug 2009 17:54:08 +0000

Thx for you report, now I am wondering how I am going to fix this...

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (VeeDub) — Fri, 07 Aug 2009 06:05:05 +0000

cdob wrote:

@VeeDub
Try a changed load order, txtsetup.sif

[SCSI.Load]
...
iastor89=iastor89.SY_,4
iastor78=iastor78.SY_,4
iastor70=iastor70.SY_,4
iastor55=iastor55.SY_,4
megasr=megasr.SY_,4
MegaINTL=MegaINTL.SY_,4
MegaIDE=MegaIDE.SY_,4
KR10N=KR10N.SY_,4

Or delete meagsr and MegaINTL lines.

@cdob

This works

Good one

Thanks

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (JakeLD) — Mon, 03 Aug 2009 14:45:44 +0000

Cdob,

If I move the [TOS] (KR10N) before the [I4] (Intel iastor 8.9) section in the mass storage INI will it changes the load order as well ? I guess the last driver specified in the INI get loaded first.

I did not known that the driver load order could be a problem, I will make sure that the most common drivers get loaded first by moving the sections.

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (VeeDub) — Mon, 03 Aug 2009 01:06:42 +0000

@cdob

I don't have access to this PC all the time, however when I next have a chance I will try your suggestion and advise.

Thanks!

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (cdob) — Sun, 02 Aug 2009 08:38:43 +0000

OverFlow wrote:

in some cases the order in which the packs INI entries appear plays a factor...

Thank's for the hint.

Given: ICH7-M AHCI : PCI\VEN_8086&DEV_27C5&CC_0106

Booting UBCD4Win result:
textmode does work
gui is loaded
Next: BSOD 0x7E iastor89.sy_

txtsetup.sif

[HardwareIdsDatabase]
...
PCI\VEN_8086&DEV_27C5&SUBSYS_0F101179="KR10N"
PCI\VEN_8086&DEV_27C5&CC_0106="iastor89"

[SCSI.Load]
...
KR10N=KR10N.SY_,4
jraid=jraid.SY_,4
iteraid=iteraid.SY_,4
inic162x=inic162x.SY_,4
iastor89=iastor89.SY_,4
iastor78=iastor78.SY_,4
iastor70=iastor70.SY_,4
iastor55=iastor55.SY_,4

Load order changed

[SCSI.Load]
...
iastor89=iastor89.SY_,4
iastor78=iastor78.SY_,4
iastor70=iastor70.SY_,4
iastor55=iastor55.SY_,4
KR10N=KR10N.SY_,4

UBCD4Win does boot fully.

This approach may fail at hardware PCI\VEN_8086&DEV_27C5&SUBSYS_0F101179="KR10N"
No hardware to test.

As for S3000AH mbd at RAID mode:

Hardware ID's:
PCI\VEN_8086&DEV_27C3&SUBSYS_348E8086&REV_01
PCI\VEN_8086&DEV_27C3&SUBSYS_348E8086
PCI\VEN_8086&DEV_27C3&CC_010400
PCI\VEN_8086&DEV_27C3&CC_0104

Txtsetup.sif dosn't contain PCI\VEN_8086&DEV_27C3&SUBSYS_348E8086, therefore PCI\VEN_8086&DEV_27C3&CC_0104 does match.

PCI\VEN_8086&DEV_27c3 does match:
PCI\VEN_8086&DEV_27c3&SUBSYS_83521033="megasr"
PCI\VEN_8086&DEV_27c3&SUBSYS_34698086="MegaINTL"
PCI\VEN_8086&DEV_27C3&CC_0104="iastor89"

@VeeDub
Try a changed load order, txtsetup.sif

[SCSI.Load]
...
iastor89=iastor89.SY_,4
iastor78=iastor78.SY_,4
iastor70=iastor70.SY_,4
iastor55=iastor55.SY_,4
megasr=megasr.SY_,4
MegaINTL=MegaINTL.SY_,4
MegaIDE=MegaIDE.SY_,4
KR10N=KR10N.SY_,4

Or delete meagsr and MegaINTL lines.

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (VeeDub) — Thu, 30 Jul 2009 23:43:34 +0000

v8.05 works correctly.

Cheers

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (OverFlow) — Thu, 30 Jul 2009 18:32:39 +0000

in some cases the order in which the packs INI entries appear plays a factor...

IE sometimes we need Raid first and sometimes we need AHCI first... the latest pack may have introduced an alteration in that ordering either th order was changed or the driver behavior has ...

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (VeeDub) — Thu, 30 Jul 2009 13:12:51 +0000

I can see the archives, I'll go back to an earlier version.

Thanks

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (VeeDub) — Thu, 30 Jul 2009 13:09:37 +0000

OverFlow wrote:

the difference is RAID / AHCI mode selected for each...
IE &CC_0101 and &CC_0101 - Indicates the mode the Hardware is in...

Yes, I thought as much. But with an earlier version of the DriverPack it previously did not matter which mode the Hardware was in.

Is there an archive of previous DriverPacks?

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (OverFlow) — Thu, 30 Jul 2009 12:03:44 +0000

the difference is RAID / AHCI mode selected for each...

IE &CC_0101 and &CC_0101 - Indicates the mode the Hardware is in...

Re: [SLVD] Intel Matrix Controller PCI\VEN_8086&DEV_27C3

null@example.com (VeeDub) — Thu, 30 Jul 2009 06:57:51 +0000

Hi,

Some further information.

I removed all references to mv61xx.sy_ in the INF as I am keen to get a Bart build working that can access the volumes on a computer.

After removing the references to mv61xx.sy Bart was able to load, and on a computer that I had ready access to and was using for testing I was able to access the volumes. At this point I assumed that the issue was resolved.

I have a number of systems using the S3000AH mbd.

I then went back to the original computer (same mbd) and tried the key. On this computer I still cannot access the volumes. I tested another computer at the same location and same issue, so there obviously is some subtle difference in the configuration of some of these systems.

Anyway the earlier HWID list was from the computer where I can see the volumes.

The following HWID list is from the computer where I am having the problem.

=========== 
PCI Devices 
=========== 
PCI\VEN_1002&DEV_515E&SUBSYS_348E8086&REV_02\4&1E46F438&0&20F0: Video Controller (VGA Compatible)
PCI\VEN_10EC&DEV_8139&SUBSYS_813910EC&REV_10\4&1E46F438&0&08F0: Conceptronic CONSP100TCL CardBus 10/100 Ethernet Adapter
PCI\VEN_8086&DEV_1076&SUBSYS_348F8086&REV_05\4&1E46F438&0&28F0: Intel(R) PRO/1000 MT Network Connection
PCI\VEN_8086&DEV_108C&SUBSYS_348F8086&REV_03\4&261E705A&0&00E5: Intel(R) PRO/1000 PM Network Connection
PCI\VEN_8086&DEV_108E&SUBSYS_00008086&REV_03\4&261E705A&0&04E5: PCI Device
PCI\VEN_8086&DEV_108F&SUBSYS_00008086&REV_03\4&261E705A&0&03E5: PCI Serial Port
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_E1\3&61AAA01&0&F0 : PCI to PCI Bridge
PCI\VEN_8086&DEV_2778&SUBSYS_00000000&REV_00\3&61AAA01&0&00 : PCI HOST Bridge
PCI\VEN_8086&DEV_27B8&SUBSYS_00000000&REV_01\3&61AAA01&0&F8 : PCI to ISA Bridge
PCI\VEN_8086&DEV_27C3&SUBSYS_348E8086&REV_01\3&61AAA01&0&FA : RAID Controller
PCI\VEN_8086&DEV_27C8&SUBSYS_348E8086&REV_01\3&61AAA01&0&E8 : Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_27C9&SUBSYS_348E8086&REV_01\3&61AAA01&0&E9 : Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_27CA&SUBSYS_348E8086&REV_01\3&61AAA01&0&EA : Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_27CB&SUBSYS_348E8086&REV_01\3&61AAA01&0&EB : Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_27CC&SUBSYS_348E8086&REV_01\3&61AAA01&0&EF : Universal Serial Bus (USB) Controller
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01\3&61AAA01&0&E0 : PCI to PCI Bridge
PCI\VEN_8086&DEV_27DA&SUBSYS_348E8086&REV_01\3&61AAA01&0&FB : SM Bus Controller
PCI\VEN_8086&DEV_27DF&SUBSYS_348E8086&REV_01\3&61AAA01&0&F9 : IDE Controller
PCI\VEN_8086&DEV_27E0&SUBSYS_00000000&REV_01\3&61AAA01&0&E4 : PCI to PCI Bridge
PCI\VEN_8086&DEV_27E2&SUBSYS_00000000&REV_01\3&61AAA01&0&E5 : PCI to PCI Bridge
20 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&1681ABEC&0
USB\ROOT_HUB\4&338A19BF&0
USB\ROOT_HUB\4&36A346D2&0
USB\ROOT_HUB\4&81B5F75&0
USB\ROOT_HUB20\4&2CF88567&0
USB\VID_090C&PID_1000\A400000000025532                      : Flash Voyager
USBSTOR\DISK&VEN_CORSAIR&PROD_FLASH_VOYAGER&REV_1100\A400000000025532&0: Corsair Flash Voyager USB Device
7 matching device(s) found.
 
============= 
Input Devices 
============= 
No matching devices found.
 
============ 
ACPI Devices 
============ 
ACPI\FIXEDBUTTON\2&DABA3FF&0
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_0
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_1
ACPI\PNP0000\4&2B9557D4&0
ACPI\PNP0003\3&61AAA01&0
ACPI\PNP0100\4&2B9557D4&0
ACPI\PNP0103\3&61AAA01&0
ACPI\PNP0200\4&2B9557D4&0
ACPI\PNP0303\4&2B9557D4&0
ACPI\PNP0501\1
ACPI\PNP0700\4&2B9557D4&0
ACPI\PNP0800\4&2B9557D4&0
ACPI\PNP0A03\2&DABA3FF&0
ACPI\PNP0B00\4&2B9557D4&0
ACPI\PNP0C02\1
ACPI\PNP0C02\3
ACPI\PNP0C04\4&2B9557D4&0
ACPI\PNP0C0E\2&DABA3FF&0
ACPI\PNP0F03\4&2B9557D4&0
ACPI_HAL\PNP0C08\0
ROOT\ACPI_HAL\0000
21 matching device(s) found.
 
============ 
 HDA Audio 
============ 
No matching devices found.
 
============ 
RAID Devices 
============ 
PCI\VEN_8086&DEV_27C3&SUBSYS_348E8086&REV_01\3&61AAA01&0&FA
    Name: RAID Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_27C3&SUBSYS_348E8086&REV_01
        PCI\VEN_8086&DEV_27C3&SUBSYS_348E8086
        PCI\VEN_8086&DEV_27C3&CC_010400
        PCI\VEN_8086&DEV_27C3&CC_0104
    Compatible ID's:
        PCI\VEN_8086&DEV_27C3&REV_01
        PCI\VEN_8086&DEV_27C3
        PCI\VEN_8086&CC_010400
        PCI\VEN_8086&CC_0104
        PCI\VEN_8086
        PCI\CC_010400
        PCI\CC_0104
PCI\VEN_8086&DEV_27DF&SUBSYS_348E8086&REV_01\3&61AAA01&0&F9
    Name: IDE Controller
    Hardware ID's:
        PCI\VEN_8086&DEV_27DF&SUBSYS_348E8086&REV_01
        PCI\VEN_8086&DEV_27DF&SUBSYS_348E8086
        PCI\VEN_8086&DEV_27DF&CC_01018A
        PCI\VEN_8086&DEV_27DF&CC_0101
    Compatible ID's:
        PCI\VEN_8086&DEV_27DF&REV_01
        PCI\VEN_8086&DEV_27DF
        PCI\VEN_8086&CC_01018A
        PCI\VEN_8086&CC_0101
        PCI\VEN_8086
        PCI\CC_01018A
        PCI\CC_0101
SCSI\OTHER&VEN___RAID&PROD__DUMMYDEVICE&REV_05XX\4&19C5DF30&0&330
    Name:   RAID  DummyDevice SCSI Other Device
    Hardware ID's:
        SCSI\Other__RAID___DummyDevice____05XX
        SCSI\Other__RAID___DummyDevice____
        SCSI\Other__RAID__
        SCSI\__RAID___DummyDevice____0
        __RAID___DummyDevice____0
        ScsiOther
    Compatible ID's:
        SCSI\Other
        SCSI\RAW
3 matching device(s) found.