Using DPs_BASE 8.05, I integrate DP_Sound_{A,B}_wnt5_x86-32_805.7z in a UWXPCD-SP3. This integration was the last step just before the creation of the ISO.
After installing it on a machine with the chipset indicated in the subject (whose natural driver for the audio controller is Realtek SoundMAX Integrated Digital Audio 5.12.1.3663 -Hardware ID: PCI/VEN_1106&DEV_3059&SUBSYS_810D1043&REV_60-), I could see that the actual driver installed was "Vinyl AC'97 Codec Combo Driver (WDM)". Sound didn't work.
Trying the installation on a virtual machine (Virtual Box 2.0.4, with Audio Host Driver: Null Audio Driver and Controller: ICH AC97 -Hardware ID: PCI/VEN_8086&DEV_2415&SUBSYS_00008086&REV_01-)), the driver for audio controller was the same: "Vinyl AC'97 Codec Combo Driver (WDM)". Sound didn't work.
Trying the installation on a laptop, the driver was the correct. I can't look the Hardware ID now, but sound worked.
DPs_BASE.ini
[General]
; preferred language
prefLang = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI = "yes"
[Settings]
; disc/bartpe/multibootDisc
instPlatform = "disc"
; trailing backslash is allowed, but not necessary
location = "C:\Documents and Settings\Anonymous\Mis documentos\backup\UWXPCD-SP3\XPCD"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod = "RunOnceEx"
; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID = "default"
; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD = "all"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC = "no"
; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset = "yes"
DP_CPU = "yes"
DP_Graphics_A = "yes"
DP_Graphics_B = "yes"
DP_Graphics_C = "yes"
DP_LAN = "yes"
DP_MassStorage = "yes"
DP_Sound_A = "yes"
DP_Sound_B = "yes"
DP_WLAN = "yes"
DP_MassStorage_textmode = "yes"DPs_BASE.log
2008-11-19 00:40:37 : <INIT> DriverPacks BASE 8.05 initialized.
2008-11-19 00:40:37 : <INIT> Host environment: WIN_XP Service Pack 3 on X86 CPU.
2008-11-19 00:40:37 : <INIT> Created temporary working directory.
2008-11-19 00:40:37 : <INIT> Imported proxy settings from Internet Explorer.
2008-11-19 00:40:37 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2008-11-19 00:40:37 : <INIT> Detected DriverPack Chipset 8.03!
2008-11-19 00:40:37 : <INIT> Detected DriverPack CPU 8.04!
2008-11-19 00:40:37 : <INIT> Detected DriverPack Graphics A 8.10.3!
2008-11-19 00:40:37 : <INIT> Detected DriverPack Graphics B 8.10!
2008-11-19 00:40:37 : <INIT> Detected DriverPack Graphics C 8.10.1!
2008-11-19 00:40:37 : <INIT> Detected DriverPack LAN 8.05.3!
2008-11-19 00:40:37 : <INIT> Detected DriverPack MassStorage 8.05!
2008-11-19 00:40:37 : <INIT> Detected DriverPack Sound A 8.05!
2008-11-19 00:40:37 : <INIT> Detected DriverPack Sound B 8.05!
2008-11-19 00:40:37 : <INIT> Detected DriverPack WLAN 8.06!
2008-11-19 00:40:37 : <INIT> Could not detect any 3rd party DriverPacks.
2008-11-19 00:40:37 : <INIT> Finished scanning.
2008-11-19 00:40:37 : <INIT> Detected settings file "C:\Documents and Settings\Anonymous\Mis documentos\backup\UWXPCD-SP3\DriverPacks\DPs_BASE.ini".
2008-11-19 00:40:37 : <INIT> Windows XP Professional - Retail SP3 detected.
2008-11-19 00:40:37 : <INIT> wnt5_x86-32_disc is the selected installation platform .
2008-11-19 00:40:37 : <INIT> Imported settings from settings file.
2008-11-19 00:40:37 : <INIT> [OptionalSettingsOther]\ATI_cpl not specified: default (None) was set.
2008-11-19 00:40:37 : <GUI> Initialized GUI.
2008-11-19 00:40:37 : <GUI> Created a list of all available language files.
2008-11-19 00:40:37 : <GUI> Set the last used language, English, as the GUI language.
2008-11-19 00:40:56 : <GUI> Refreshed UpdateChecker with success.
2008-11-19 00:40:57 : <GUI> Saved settings!
2008-11-19 00:40:57 : <GUI> Closed GUI.
2008-11-19 00:40:57 : <SEL> Selected module: mod_slip_wxp_x86-32_disc_m2.
2008-11-19 00:40:57 : <PREP> Removed all attributes from \I386.
2008-11-19 00:40:57 : <PREP> \I386\winnt.org was not found, \I386\winnt.sif was not restored.
2008-11-19 00:40:57 : <PREP> Neither txtsetup.org or dosnet.org was found. The removal of
2008-11-19 00:40:57 : <PREP> any Service Packs we may have added with Driverpacks was skipped
2008-11-19 00:40:57 : <PREP> Mass Storage Removal was also skipped because no I386\DRIVERPACK_MASSSTORAGE_WNT5_X86-32.INI was found
2008-11-19 00:40:58 : <PREP> Verified method 2 references don't exist in txtsetup.sif or dosnet.inf.
2008-11-19 00:40:58 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2008-11-19 00:41:03 : <SLIP> Extracted DriverPack MassStorage to a temporary working directory.
2008-11-19 00:41:03 : <SLIP> C:\Documents and Settings\Anonymous\Mis documentos\backup\UWXPCD-SP3\DriverPacks\tmp\DPMtmp\DriverPack_MassStorage_wnt5_x86-32.ini
2008-11-19 00:41:04 : <SLIP> Processing the files now. This may take a minute.
2008-11-19 00:41:26 : <SLIP> Slipstreamed DriverPack MassStorage text mode driver files.
2008-11-19 00:41:26 : <SLIP> txtsetup.sif Backed-up Successfully
2008-11-19 00:41:26 : <SLIP> dosnet.inf Backed-up Successfully
2008-11-19 00:41:29 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2008-11-19 00:41:30 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2008-11-19 00:41:58 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2008-11-19 00:41:58 : <SLIP> Created necessary directory structure for method 2.
2008-11-19 00:41:58 : <SLIP> Copying files necessary for method 2.
2008-11-19 00:41:59 : <SLIP> Extracted additional files necessary for method 2.
2008-11-19 00:41:59 : <SLIP> expanded setup.ex_ to setuporg.exe
2008-11-19 00:41:59 : <SLIP> SETUP.EX_ Backed-up Successfully
2008-11-19 00:41:59 : <SLIP> Compressed setup.exe to SETUP.EX_.
2008-11-19 00:41:59 : <SLIP> Method 2 setup.ex_ installed
2008-11-19 00:41:59 : <SLIP> Created \I386\presetup.cmd file.
2008-11-19 00:41:59 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2008-11-19 00:41:59 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2008-11-19 00:41:59 : <SLIP> Copied DriverPack Chipset to \OEM.
2008-11-19 00:41:59 : <SLIP> Copied DriverPack CPU to \OEM.
2008-11-19 00:42:03 : <SLIP> Copied DriverPack Graphics A to \OEM.
2008-11-19 00:42:12 : <SLIP> Copied DriverPack Graphics B to \OEM.
2008-11-19 00:42:15 : <SLIP> Copied DriverPack Graphics C to \OEM.
2008-11-19 00:42:15 : <SLIP> Copied DriverPack LAN to \OEM.
2008-11-19 00:42:15 : <SLIP> Copied DriverPack MassStorage to \OEM.
2008-11-19 00:42:18 : <SLIP> Copied DriverPack Sound A to \OEM.
2008-11-19 00:42:21 : <SLIP> Copied DriverPack Sound B to \OEM.
2008-11-19 00:42:23 : <SLIP> Copied DriverPack WLAN to \OEM.
2008-11-19 00:42:23 : <SLIP> Copied DriverPacks to \OEM.
2008-11-19 00:42:23 : <SLIP> Will not slipstream patches, Service Pack 3 was detected.
2008-11-19 00:42:23 : <SLIP> WINNT.SIF Backed-up Successfully
2008-11-19 00:42:23 : <SLIP> Updated \I386\winnt.sif to support method 2.
2008-11-19 00:42:23 : <SLIP> Updated DPsFnshr.ini to enable KTD for all DriverPacks.
2008-11-19 00:42:23 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2008-11-19 00:42:23 : <SLIP> DP_Install_Tool was copied successfully
2008-11-19 00:42:23 : <SLIP> Slipstream finished in 1 minutes and 26 seconds.
2008-11-19 00:42:27 : <CLNP> Temporary working directory successfully deleted.
2008-11-19 00:42:27 : Program terminated.Could it be a bug in DPs_BASE or looks more like a Windows/Driver trouble?
Thanks a lot!
(charly)