DriverPacks.net Forum - [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-10-01T04:35:37Z

Thanks a million JakeLD

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-10-01T03:47:55Z

The issued should be fixed in 8.10A

http://driverpacks.sytes.net/driverpack … 32_810A.7z

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-27T03:32:29Z

Glad we were able to get you up and running...

I am still curious why this happened.
We might be able to avoid this or a similar situation in the future with that answer
I am still hopeing the UBCD4Win Guru's will provide more info as to the 'why'...
this should not have been an issue, yet it was...

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-27T00:35:27Z

OverFlow's instructions for removing the ALI IDE driver from the DriverPacks MassStorage inf file were good, and as a result my new UBCD4Win now properly recognizes my hard drive and all the partitions on it. Thanks to all involved for your help.

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-25T05:03:27Z

Thanks for the explanations. No thank you, I don't want to go the complicated route, I'll give your instructions a try and report back.

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-25T04:58:50Z

The contents of MassStorage.sif get appended to TXTSETUP.SIF in the build process to overcome a limitation of pebuilder, which provide the additional sub-sections required to support certain driver types.

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-25T04:31:11Z

there is a much more complicated way i could explain to you to do it manually
that would take pages of instructions

the above is straight forward and a 123 process (as it was designed to be)
Try the easy way first.

perhaps copy the current folder so you can compare them after.
if you really want the nuts and bolts of it - I will - be careful what you wish for

PS if you are looking for a simple plugin to learn the ropes with... This ain't it.

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-25T04:24:19Z

Well, I do not fully understand everything that goes on. So I need to unpack the DriverPack, do the edit you mentioned, repack with 7zip, and config; I cannot go into my UBCD4Win project directory, where the drivers seem to already be sitting in the folder plugins\DriverPacks.net\MassStorage\Winxp ? (BTW, \Winxp does not contain the aliide.sy_ file). If not, then I'll give it a try. What is the MassStorage.sif file sitting in plugin\DriverPacks.net\ ? Oddly, it contains an entry for aliide.sys.

Thanks for your great help!

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-25T03:26:33Z

OK...

PCI\VEN_10B9&DEV_5229 is a match for a native windows driver
SP3 = ALIIDE.SY_ in the I386 folder... ALi Corporation 2002 v1.51
SP2 = ALIIDE.SY_ in the I386 folder... Acer Laboratories Inc. 2000 v1.20

We do include an upgrade for this driver
ALIIDE.SYS 2002 ALi Coporation. DriverVer = 03/06/2003, 1.5.1.0

I guess we missed the fact that SP3 includes this driver now, and it doesn't need to be replaced. (if SP3 source)
However since we are "replaceing" it with the exact same driver it 'shouldn't' cause an issue...
the possability exists that the driver in the packs is slightly corrupted or that something in the windows native driver has been tweaked by MS... IDK. Either way we are eliminateing things it is not...

So it appears that i owe you at least 2.5 cents... it is a windows problem and a DriverPacks problem...

if you desire you may extract the mass pack and...
remove the [AU] section from the mass storage ini
Repack with 7zip...
use the base plugin to 'config' your new mass storage pack from pebuilder.
build and test... i think your problem is gone...

@team
This driver should be removed from the INI since our current version is the same as the XP sp3 version.
If Someone slipstreams XP sp2 the native text mode driver should work and it should still be upgraded to the newer version during PnP setup. a win, win scenario if i am correct.
- IE i think we need it for windows but not for text mode so just pull the ini entry and leave the driver

edit.....

this may apply to other drivers in teh mass storage pack too.
IE we may see somthing similar to this again...
there are only a few bus extenders like this one, is it related to that... i think yes...

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-24T03:02:15Z

that is exactly what i needed
thank you so much!

investigateing now...

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-24T02:50:06Z

I suppose you just want the PCI Devices that HWID found, right, but if you want it all, let me know:

===========
PCI Devices
===========
PCI\VEN_1002&DEV_4C4D&SUBSYS_10041025&REV_64\4&15E6A2C8&0&0008: ATI RAGE Mobility (ACER)
PCI\VEN_104C&DEV_8400&SUBSYS_3B001186&REV_00\4&2A24BFBA&0&0098: D-Link AirPlus DWL-650+ Wireless Cardbus Adapter
PCI\VEN_10B9&DEV_1533&SUBSYS_00000000&REV_0A\3&61AAA01&0&38 : ALi PCI to ISA bridge
PCI\VEN_10B9&DEV_1621&SUBSYS_00000000&REV_05\3&61AAA01&0&00 : ALi CPU to PCI bridge
PCI\VEN_10B9&DEV_5229&SUBSYS_00000000&REV_20\3&61AAA01&0&78 : ALi M5229 PCI Bus Master IDE Controller
PCI\VEN_10B9&DEV_5237&SUBSYS_00000000&REV_03\3&61AAA01&0&A0 : ALi PCI to USB Open Host Controller
PCI\VEN_10B9&DEV_5247&SUBSYS_00000000&REV_01\3&61AAA01&0&08 : ALi PCI to AGP Controller
PCI\VEN_10B9&DEV_7101&SUBSYS_10041025&REV_09\3&61AAA01&0&88 : ALi 7101 Power Management Controller
PCI\VEN_11C1&DEV_0449&SUBSYS_04401468&REV_01\3&61AAA01&0&30 : Lucent Win Modem
PCI\VEN_1217&DEV_6872&SUBSYS_10041025&REV_05\3&61AAA01&0&98 : O2Micro OZ6812 CardBus Controller
PCI\VEN_125D&DEV_1969&SUBSYS_10041025&REV_02\3&61AAA01&0&40 : ESS 1969 PCI AudioDrive (WDM)
11 matching device(s) found.

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-23T05:46:31Z

hmmm... well lets narrow it down a bit further...

can you please post your hwid's useing the tool in my signature

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-23T05:03:03Z

I believe you are right, OverFlow. I disabled the DriverPacks MassStorage drivers in UBCD4Win, created a new ISO, booted it, and it now finds and understands the FAT32 D: partition on my laptop. So what does that mean, if anything? Perhaps the Win XP running on UBCD4Win is choosing the wrong driver? Or the right driver, but the wrong . . something else?

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-22T16:24:37Z

based on the age and type of machine standard IDE drivers apply
IE you don't need a driver your HDD is natively supported by the OS.
controller type = Standard IDE

I belive that you can skip the adding a driver step. you should just be able to disable the DriverPacks plugin and still be able to see the HDD useing only XP's included drivers.

PS We don't replace native drivers we supplement them. so the driver you are useing in this stinkpad is most likely the XP driver and not a DriverPacks driver at all...

Re: [SLV] UBCD4WIN not recognizing ALi M5229 PCI Bus Master IDE

2008-09-22T04:55:04Z

I appreciate your input, Jaak. This is all happening on an old IBM Thinkpad Celeron laptop. There is only one hard drive. It has two partitions on it, and both partitions show up in UBCD4Win; one says volume C: Type NTFS, the other says volume D: Type Unknown.

OverFlow, I found your tutorial, thanks. I'll try to make a UBCD4Win without DriverPacks MassStorage driver and see how it works. Ya know, there is a lot to this UBCD4Win, I'll try not to mess it all up.