DriverPacks.net Forum - [IMPL] Attansic L1 driver 2.3.7.9

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (SamLab) — Fri, 04 Jul 2008 13:09:04 +0000

2.3.7.9 on Attansic L1:

Crappy system slows down, barely moving mouse - Wait produced no results. After restarting OS is not loaded (as well at some stage begins to stall, you can watch as slowly strips appear downloads).
Tried with different versions of drivers. The result is identical.

=========== 
PCI Devices 
=========== 
PCI\VEN_1002&DEV_7280&SUBSYS_21561458&REV_00\4&2B9C2F50&0&0008: Radeon X1950 Pro
PCI\VEN_1002&DEV_72A0&SUBSYS_21571458&REV_00\4&2B9C2F50&0&0108: Radeon X1950 Pro Secondary
PCI\VEN_1102&DEV_0008&SUBSYS_10211102&REV_00\4&1FAF5EA3&0&10F0: PCI\VEN_1106&DEV_3044&SUBSYS_2A221043&REV_80\4&1FAF5EA3&0&18F0: VIA OHCI-PCI\VEN_1969&DEV_1048&SUBSYS_82261043&REV_B0\4&935E26E&0&00E3: Ethernet-PCI\VEN_197B&DEV_2363&SUBSYS_81E41043&REV_02\4&18CD42CE&0&00E4: JMicron JMB36X Controller
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_F2\3&11583659&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2810&SUBSYS_00000000&REV_02\3&11583659&0&F8: Intel(R) ICH8/ICH8R Family LPC Interface Controller - 2810
PCI\VEN_8086&DEV_2820&SUBSYS_81EC1043&REV_02\3&11583659&0&FA: Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
PCI\VEN_8086&DEV_2825&SUBSYS_81EC1043&REV_02\3&11583659&0&FD: Intel(R) ICH8 2 port Serial ATA Storage Controller - 2825
PCI\VEN_8086&DEV_2830&SUBSYS_81EC1043&REV_02\3&11583659&0&E8: Intel(R) ICH8 Family USB Universal Host Controller - 2830
PCI\VEN_8086&DEV_2831&SUBSYS_81EC1043&REV_02\3&11583659&0&E9: Intel(R) ICH8 Family USB Universal Host Controller - 2831
PCI\VEN_8086&DEV_2832&SUBSYS_81EC1043&REV_02\3&11583659&0&EA: Intel(R) ICH8 Family USB Universal Host Controller - 2832
PCI\VEN_8086&DEV_2834&SUBSYS_81EC1043&REV_02\3&11583659&0&D0: Intel(R) ICH8 Family USB Universal Host Controller - 2834
PCI\VEN_8086&DEV_2835&SUBSYS_81EC1043&REV_02\3&11583659&0&D1: Intel(R) ICH8 Family USB Universal Host Controller - 2835
PCI\VEN_8086&DEV_2836&SUBSYS_81EC1043&REV_02\3&11583659&0&EF: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
PCI\VEN_8086&DEV_283A&SUBSYS_81EC1043&REV_02\3&11583659&0&D7: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
PCI\VEN_8086&DEV_283E&SUBSYS_81EC1043&REV_02\3&11583659&0&FB: Intel(R) ICH8 Family SMBus Controller - 283E
PCI\VEN_8086&DEV_283F&SUBSYS_00000000&REV_02\3&11583659&0&E0: Intel(R) ICH8 Family PCI Express Root Port 1 - 283F
PCI\VEN_8086&DEV_2845&SUBSYS_00000000&REV_02\3&11583659&0&E3: Intel(R) ICH8 Family PCI Express Root Port 4 - 2845
PCI\VEN_8086&DEV_2847&SUBSYS_00000000&REV_02\3&11583659&0&E4: Intel(R) ICH8 Family PCI Express Root Port 5 - 2847
PCI\VEN_8086&DEV_29A0&SUBSYS_00000000&REV_02\3&11583659&0&00: Intel(R) P965/G965 Processor to I/O Controller - 29A0
PCI\VEN_8086&DEV_29A1&SUBSYS_00000000&REV_02\3&11583659&0&08: Intel(R) P965/G965 PCI Express Root Port - 29A1
23 matching device(s) found.
 
=========== 
USB Devices 
=========== 
USB\ROOT_HUB\4&10B2C51B&0                                   : USB\ROOT_HUB\4&2600A89F&0                                   : USB\ROOT_HUB\4&270D945D&0                                   : USB\ROOT_HUB\4&2FB3158C&0                                   : USB\ROOT_HUB\4&3B6FF112&0                                   : USB\ROOT_HUB20\4&1087794A&0                                 : USB\ROOT_HUB20\4&27A8BD23&0                                 : USB\VID_04A9&PID_2684\SBF660191909A                         : USB\VID_04A9&PID_2684&MI_00\6&110C9C8E&0&0000               : MF3200
USB\VID_04A9&PID_2684&MI_01\6&110C9C8E&0&0001               : USB\VID_067B&PID_2515\A99000000000036A0                     : USB\VID_067B&PID_2517\A99000000000036A1                     : USB\VID_09DA&PID_000E\5&1E3B7BE0&0&1                        : USB HID-USBPRINT\CANONMF3200_SERIES\7&2230D1C6&0&USB001             : CanonMF3200 Series
USBSTOR\DISK&VEN_USB_2.0&PROD_FLASH_DISK&REV_1.00\A99000000000036A1&0: USB 2.0 Flash Disk USB Device
15 matching device(s) found.
 
============= 
Input Devices 
============= 
HID\VID_09DA&PID_000E\6&34DC05DE&0&0000                     : HID-1 matching device(s) found.
 
============ 
ACPI Devices 
============ 
ACPI\ATK0110\1010110                                        : ATK0110 ACPI UTILITY
ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_0                : Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_1                : Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz
ACPI\PNP0000\4&14C67D85&0                                   : ACPI\PNP0100\4&14C67D85&0                                   : ACPI\PNP0200\4&14C67D85&0                                   : ACPI\PNP0303\4&14C67D85&0                                   : ACPI\PNP0401\4&14C67D85&0                                   : ECP ACPI\PNP0501\1                                              : ACPI\PNP0700\4&14C67D85&0                                   : ACPI\PNP0800\4&14C67D85&0                                   : ACPI\PNP0A06\3&473F1A46&0                                   : ACPI\PNP0A08\0                                              : ACPI\PNP0B00\4&14C67D85&0                                   : CMOS ACPI\PNP0C01\1                                              : ACPI\PNP0C01\A                                              : ACPI\PNP0C02\0                                              : ACPI\PNP0C02\10                                             : ACPI\PNP0C02\11                                             : ACPI\PNP0C02\2E                                             : ACPI\PNP0C04\4&14C67D85&0                                   : ACPI\PNP0C0C\AA                                             : ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-ROOT\ACPI_HAL\0000                                          : 25 matching device(s) found.

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (SamLab) — Tue, 17 Jun 2008 11:51:01 +0000

On 3 PC!!! with different motherboard of Asus this driver - http://dlsvr02.asus.com/pub/ASUS/mb/soc … 86_x64.rar (on the page http://support.asus.com/download/downlo … model=P5K) works fine! but driver in the LAN 8.06 don't work!

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (JakeLD) — Mon, 16 Jun 2008 23:55:04 +0000

Sam I'm lost here.

krige and vier reported that the new driver was working fine. The driver your asking for is old too. The one in the pack is 12/20/2007,2.3.7.9, the one in your link is 08/30/2007,2.3.7.4. (2.4.7.4 = vista version number).

So if the last one available from the manufacturer is not fixing the issue, I guess the last version could be problematic with some mobo and same thing for the one before that. Attansic/Atheros must fix their mess.

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (SamLab) — Sat, 14 Jun 2008 11:03:07 +0000

With 2.3.7.9 (DP 8.06B) problem on the Asus P5b-E and Asus P5K - Windows no start! and normal works only with new drivers - AtherosL1_LAN_v2474.zip (http://dlsvr01.asus.com/pub/ASUS/lan/At … _v2474.zip)

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (Jaak) — Mon, 09 Jun 2008 19:21:04 +0000

Thanks.
I am looking at the LAN pack again. (did a new HWIDs readout and looking at requests.)

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (krige) — Mon, 09 Jun 2008 08:42:02 +0000

I'd like to report that I tested the LAN drivers testpack using a slipstream installation disk created using nLite and DriverPacks BASE and it worked perfectly on my device, an "Attansic/Atheros L1 Gigabit Ethernet 10/100/1000Base-T".

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (Jaak) — Wed, 04 Jun 2008 00:46:49 +0000

because nLite cannot slipstream all DriverPacks.
DriverPacks BASE was written to do that, and DriverPacks BASE will include the tools to handle exceptions specifically written in DriverPacks INI files so as to install some CPL, but exceptions also take care that drivers not meant for a specific OS do not get slipped into the wrong OS.. stuff like that.
(That bug could be solved now, but very long ago I tried nLite to slip all DriverPacks, and I got a txtfile like dosnet.inf or txtsetup.sif of over one GIGABYTE.. it had quite clearly choked on the massive amount of INFs...)

after DriverPacks BASE is used on a nLited/RVM'd source, you can build an ISO..

(( OH, you ought to read the now ''outdated" tutorial. It appears it only has info on base 705.2 but when you read it you will see there is a treasure of background and tips.. see signature .))

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (krige) — Tue, 03 Jun 2008 22:19:31 +0000

Jaak wrote:

We have also adopted the habit of including a "changelog' txt in testpacks because when there is than one team member working on a pack, he can see what was done to the latest testpack he downloaded and does not have to duplicate work.

I think that's good for the users too, so that they can see when a driver has been already included and don't need to post a request.

Jaak wrote:

Of course we wanted you to try the testpack we linked to, because the driver you and vier requested got included.
That's another one of the things we also do. We let the person with the REQuest test the testpack even when they are not on testing team..
When you think about this you can see this makes sense.

Sure it does, I will try it as soon as possible, probably next week-end.

So far I have used only nLite to include the drivers into the installation disk. Do you instead suggest to use it only to create the iso and then add the drivers to it using DriverPacks BASE? If yes, why do you recommend this procedure?

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (Jaak) — Tue, 03 Jun 2008 15:24:49 +0000

We have also adopted the habit of including a "changelog' txt in testpacks because when there is than one team member working on a pack, he can see what was done to the latest testpack he downloaded and does not have to duplicate work.
(To work on it it has to unzipped and having the changelog in the testpack makes it easier to check what was done, without having to look up the topic.).

@ krige.
Of course we wanted you to try the testpack we linked to, because the driver you and vier requested got included.
That's another one of the things we also do. We let the person with the REQuest test the testpack even when they are not on testing team..
When you think about this you can see this makes sense.

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (OverFlow) — Tue, 03 Jun 2008 06:35:58 +0000

http://driverpacks.net/DriverPacks/overview.php click on each changelog link.

the testpacks changelogs are in the testing team forum, and is hidden if you are not on the testing team

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (krige) — Tue, 03 Jun 2008 06:23:39 +0000

Thanks for the explanation OverFlow

Is there a list of contents for the DriverPacks, either of the official or the test ones?

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (OverFlow) — Tue, 03 Jun 2008 06:10:25 +0000

if the main packs fail and you see a post that is related and has a test pack then it's probably a good idea to try it.

if you find that a device is not included and there is a post from someone else about that device then it's probably a good idea to try it.

It is great! that you are haveing the same issue... If the testpack fixes it for both of you it will be considered a valid fix. Please report back if it works (or not) for you.

Thanks for posting... it does help a great deal.

Packs are released when neccessary...

It is our goal to support all hardware and be stable and reliable.
We like to try to stay current too... but that takes a back seat to stability.

1 support all PC hardware
(although laptop support is growing)
2 cause no issues
3 stay current

Welcome to DriverPacks krige thanks for being here

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (krige) — Tue, 03 Jun 2008 05:54:22 +0000

Jaak wrote:

It seems you missed the link to the new LAN ((testpack)) which includes the driver.

Hi Jaak, I didn't miss it but I have been known about it only after I have already tried the driver mentioned by Vier on the first post. So I can't report a positive on the new testpack yet but I can report a negative on the current "DriverPack LAN".

How often are the official driver packs updated? Am I supposed to use always the testpacks?

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (Jaak) — Mon, 02 Jun 2008 23:11:01 +0000

hi Krige,
It seems you missed the link to the new LAN ((testpack)) which includes the driver.

See this post..
http://forum.driverpacks.net/viewtopic. … 271#p21271

Re: [IMPL] Attansic L1 driver 2.3.7.9

null@example.com (krige) — Mon, 02 Jun 2008 09:55:51 +0000

Jaak wrote:

You will have to report a positive or negative.

I report that the "Attansic L1 driver" currently present in the DriverPack LAN caused Windows to freeze at startup in my system (an Asus X53S laptop) and that the one which Vier reported (2.3.7.9) works fine.

Vier wrote:

The file is 2.4.7.11 for Vista. But file for XP is 2.3.7.9 in inf file

Thanks for the explanation :-)